Fewer Box Sizes: How Manufacturers Can Rationalise Their Corrugated Packaging Range

A manufacturer can often run with fewer box sizes by grouping products of similar dimensions, covering small differences with inserts instead of separate boxes, and choosing outer sizes that fit the pallet. Start with data: the annual use per size, the product dimensions and the empty space of each product in its box. Keep a separate size where the product, the packing line, shipping charges or the EU empty space limit require it. Fewer sizes mean fewer stock items and longer runs per size. As of 18 November 2026.

Signs that your range has too many sizes

  • Sizes that differ by a few millimetres, created for different products or customers and never merged.
  • Many codes with a small annual use, ordered in small lots, each with its own set-up.
  • Packers take the nearest box and fill the gap with void fill.
  • One size runs out while others stay on the shelf for months, and old sizes remain after a product change.
  • Every new product gets a new box code without a check of the existing range.

Step 1: take stock of sizes and products

Rationalising a range is a data job before it is a packaging job. Collect the following in one sheet:

Data Where to find it What it shows
Box codes with internal dimensions, construction, board and print Specifications, the item master in your ERP system Duplicates and near-duplicates
Annual use and number of orders per code Purchasing history Which sizes carry the volume and which are rarely used
Products packed in each box, with dimensions, weight and units per box Product data, packing instructions Which products could share a box
Protection that each product needs Packing area, damage records The space the box must leave around the product
Empty space of each product in its box Calculation from the dimensions Boxes that are too large, and the room left for merging
How the goods are shipped, and packing line limits Logistics, machine documentation Whether pallet fit, parcel size or machine formats decide

Sort the codes by annual use. Codes at the bottom of the list and codes within a few millimetres of each other are the first candidates. How to calculate empty space is shown in right-sizing boxes.

Step 2: group products and test a target size

Group products by the internal size they need: the product plus its protection. Each group needs a box that fits its largest product; then check how much space the smallest one leaves. Illustration, not an offer: three products are packed today in three boxes, each with 5 mm added on every side. Empty space is calculated in a simplified way: the internal volume of the box minus the volume of the product, divided by the internal volume of the box.

Product (mm) Empty space in a box of 310 × 210 × 110 mm Empty space in a box of 250 × 180 × 90 mm
A: 300 × 200 × 100 about 16% does not fit
B: 280 × 190 × 90 about 33% does not fit
C: 240 × 170 × 80 about 54% about 19%

One box for all three would leave more than half of the box empty around product C. Two sizes, the larger one for A and B and the smaller one for C, keep every product well below that level. Three sizes become two, not one: the aim is fewer sizes, not the fewest possible.

Step 3: inserts instead of separate boxes

When products differ in shape more than in size, one outer box with different inserts, dividers or pads can replace several boxes. The outer box then runs as one item in longer runs, and only the inserts differ by product. Count the extra packing step and test the pack with real products. Under the EU packaging regulation, filling materials such as paper cuttings, air cushions and bubble wrap count as empty space (Article 24(3)); inserts are not named in that list, so do not assume that an insert lowers the ratio.

Step 4: fit the outer sizes to the pallet

If your goods travel on pallets, choose outer dimensions from the 600 × 400 mm module of ISO 3394 or its whole-number fractions. Four cartons of 600 × 400 mm fill one layer of a 1200 × 800 mm EUR pallet, and sizes from the same grid share a layer without overhang or gaps. The module sizes and the number per layer are listed in modular box sizes for EUR pallets.

What changes when you have fewer sizes

Area Effect of fewer sizes Watch out for
Stock Fewer items, reorder points and safety stocks Higher stock of the remaining sizes
Price per box Longer runs per size spread the fixed costs of preparing production over more boxes A larger box uses more board per product
Transport Fuller pallets; modular sizes combine on one pallet Larger boxes for small products ship more air
Packing labour Fewer choices, fewer packing errors, simpler instructions Extra void fill or inserts add steps
Parcels Fewer box types at dispatch Carriers commonly bill the higher of the actual and the volumetric weight (see dimensional weight)
PPWR A chance to check every box against the empty space limit A merged size with more than 50% empty space in grouped, transport or e-commerce packaging

Illustration, not an offer: a range of 24 sizes with an annual use of 120000 boxes, reduced to 8 sizes, raises the average annual use per size from 5000 to 15000 boxes. If you keep one pallet of safety stock per size, that stock falls from 24 pallets to 8.

When more sizes are the better choice

  • Parcels billed by size, where a few centimetres change the billed weight.
  • Fragile or heavy products that need a tight fit or a particular board.
  • High-volume products, where a closer fit saves board, void fill and transport on every unit.
  • Automatic packing lines with fixed format ranges, where a change of size means a changeover.
  • Printed boxes that the end customer sees, where the box is part of the product.
  • The empty space limit, where merging would leave more than 50% empty space.

The EU empty space limit in short

Article 24(1) of Regulation (EU) 2025/40 (PPWR) requires economic operators who fill grouped, transport or e-commerce packaging to keep the maximum empty space ratio at 50%, from 1 January 2030 or 3 years after the entry into force of the implementing acts on the calculation method, whichever is later. The Commission is to adopt that method by 12 February 2028; it had not appeared in EUR-Lex on 18 November 2026. Article 24(5) exempts sales packaging used as e-commerce packaging and reusable packaging in a re-use system. Article 10 requires the manufacturer or importer to reduce packaging weight and volume to the minimum necessary for its function by 1 January 2030. See also the PPWR checklist for packaging buyers. General information, not legal advice.

A plan in seven steps

  1. Agree the goal with purchasing, production, logistics and sales: what may change, from sizes to boards and print.
  2. Collect the data from step 1 and check it in the packing area.
  3. Propose a target range and check every product against it: fit, protection, empty space, pallet, packing line.
  4. Make prototypes and test them with real products, on the line and in test shipments.
  5. Switch step by step. Use up old stock, change product by product, and update the specifications, the item master and the packing instructions.
  6. Brief the packing team on which box goes with which product.
  7. Review and keep the rule. After the first months, check damage, packing time and stock, and check the existing range before any new box code is created. Compare the options by total cost (see comparing corrugated packaging quotes on total cost).

How we work with manufacturers on fewer sizes at Kartoniki.eu

We audit box ranges: we review your sizes and suggest a smaller range, with a lower dimensional weight where parcels are involved, and we can audit the manual work of packing different box types. We give regular feedback on where a construction could be optimised. We make many sizes in small quantities, also in one delivery, as well as inserts, dividers and non-standard constructions, including hand gluing and kitting.

Before a series we provide board samples, 3D visualisations of the print, construction drawings and prototypes. We can test the box on your packing line, work with the suppliers of your box-forming machines and instruct your packing team. We can help you review your packaging against the PPWR (empty space, material, recyclability), and on request we can provide supplier data on the board, such as recycled fibre content, carbon footprint or EPDs, for your reporting. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. Most orders are delivered within 7 days (max. 16 working days).

Sources

Regulation (EU) 2025/40 on EUR-Lex (Articles 10 and 24), checked on 18 November 2026; the ISO 3394:2012 catalogue entry (600 × 400 mm module). The empty space figures and the range example are our simplified illustrations. Our services are described as of 18 November 2026.

Send us your range

Send us your list of box codes with internal dimensions and annual use, the products packed in each box and how you ship them. We review the range, propose fewer sizes and make prototypes so you can test them before you switch. Write to us through our home page.

Frequently asked questions

How many box sizes does a manufacturer need?

There is no general number. It depends on how widely your product dimensions vary, how you ship (full pallets, parcels or your own transport), your packing line and the empty space you can accept. Start from data: the annual use per size and the empty space of each product in its box. Sizes that differ by a few millimetres or are rarely used are the first candidates to merge.

What data do we need for a box size audit?

A list of box codes with internal dimensions, construction, board and print; the annual use and the number of orders per code; the products packed in each box, with their dimensions, weight and protection; how the goods are shipped; and the format limits of any packing machines. Your item master and purchasing history usually hold most of it.

Can inserts replace separate box sizes?

Often, yes. Several products can share one outer box when an insert, a divider or a pad holds each one in place. The outer box then runs as one item, and the variants move to the inserts. Count the extra packing step, and test the pack with real products before you switch.

Can fewer sizes conflict with the PPWR empty space limit?

Yes. From 1 January 2030, or 3 years after the implementing acts on the calculation method enter into force, whichever is later, economic operators who fill grouped, transport or e-commerce packaging must keep the empty space ratio at no more than 50% (Article 24 of Regulation (EU) 2025/40). A merged size that leaves small products with too much space can fail this test. General information, not legal advice.

Do inserts and void fill count as empty space?

Article 24(3) counts filling materials such as paper cuttings, air cushions and bubble wrap as empty space. Inserts are not named in that list, and the calculation method, due by 12 February 2028, had not appeared in EUR-Lex on 18 November 2026. Do not assume that an insert lowers the ratio.

Will fewer sizes lower our packaging costs?

Stock and handling usually become simpler, and longer runs per size spread the fixed costs of preparing production over more boxes. But a larger box for a small product uses more board and more void fill, and it can raise shipping charges. Compare the options on total cost, not on the number of sizes.

Can you audit our box range?

Yes. We review your sizes and suggest a smaller range, with a lower dimensional weight where parcels are involved, and we can also audit the manual work of packing different box types. Send us your list of codes with the annual use and the product dimensions.

Can you deliver many sizes in small quantities?

Yes, many sizes in small quantities, also in one delivery. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote.