PFAS in Food-Contact Packaging: What the PPWR Changes from 12 August 2026 and What to Ask Your Supplier

PFAS are a large group of fluorinated chemicals. They have been widely used to make paper and board resist grease and water, for example in takeaway boxes and bakery packaging. Since 12 August 2026 the EU packaging regulation (PPWR, Regulation (EU) 2025/40) sets concentration limits for PFAS in packaging that comes into contact with food. This article explains the limits, which packaging is affected and what to ask a supplier. It is general information, not legal advice, and it reflects the situation on 30 October 2026.

What the PPWR says about PFAS

Article 5 of the PPWR restricts certain substances in packaging. For food-contact packaging it sets three limits, which apply to packaging placed on the market from 12 August 2026:

Limit What it covers
25 ppb (25 µg/kg) Any single PFAS, measured by targeted analysis, with polymeric PFAS excluded
250 ppb (250 µg/kg) The sum of the PFAS measured by targeted analysis, with polymeric PFAS excluded
50 ppm (50 mg/kg) Total PFAS, including polymeric PFAS

These are maximum concentrations, not a ban on every trace of PFAS. Packaging that stays below all three limits can still be placed on the market, and the limits apply whether or not PFAS were added intentionally. In practice, intentionally added fluorinated grease barriers are hard to reconcile with limits this low, so suppliers are moving to other solutions. Test methods for these limits are still being developed, which is why it matters how and where a result was measured. Here ppb means parts per billion and ppm means parts per million.

Which packaging is affected

The limits concern packaging that comes into direct contact with food: takeaway and pizza boxes, bakery and fast-food trays and wrappers, paper bags and cups for hot or greasy food. A corrugated shipping carton that only holds sealed or inner-wrapped goods is normally not in direct contact with food, so PFAS is not the main issue for it. If food goes into the carton unwrapped, such as pizza, bread or fried food, then the carton or its liner is food-contact packaging.

Mixed designs need a closer look. Ask which layer touches the food, because that layer has to meet the limits. For sizes, board and print of takeaway packaging see corrugated pizza, takeaway and bakery boxes.

What replaces PFAS-based barriers

Grease and moisture resistance can be achieved in other ways, each with trade-offs:

  • Untreated board with an inner paper or bag around the food. It is the simplest solution, but very oily food can show through over time.
  • Water-based barrier coatings on paper and board. Ask for proof of grease resistance for your food and holding time.
  • Plastic-based coatings or laminates, such as PE or PLA. They are a strong barrier, but they can complicate recycling and bring their own requirements.
  • Greaseproof or parchment-type paper as a separate insert, leaving the board itself untreated.

Which option fits depends on the food, the temperature, the holding time and the recycling route in your market. Treat any “recyclable” or “compostable” claim as something the supplier must be able to substantiate.

Eight questions to ask your supplier

The PPWR expects manufacturers to show compliance in their technical documentation, so a supplier should be able to give you test reports and a current declaration of conformity.

  1. Is any layer that touches food (board, liner, coating, ink or adhesive) treated with fluorinated substances?
  2. Is “PFAS-free” based on a test, or only on “not intentionally added”? Ask for the test report.
  3. Which method and which laboratory produced the result? Targeted PFAS analysis and total fluorine answer different questions.
  4. Does the declaration of conformity for food contact cover the exact product you buy, and is it current?
  5. What replaced the barrier, and what shows that it holds grease and moisture for your food and holding time?
  6. Can the supplier substantiate any “recyclable” or “compostable” claim for the new barrier?
  7. How is each batch traced, and what happens if the formulation of the board or coating changes?
  8. Who keeps the technical documentation, and how quickly can you get it if an authority or a customer asks?

What to do now

  1. List your products and mark which ones are in direct contact with food and which are inner-packed.
  2. Ask each supplier for the documents above, starting with the direct-contact items.
  3. Test a PFAS-free option with your own food, temperature and holding time before you switch the whole range.
  4. Ask your supplier how packaging made or delivered before 12 August 2026 is treated, because the limits apply to packaging placed on the market from that date.
  5. Keep the documents with your product files.

How this fits with other rules

The PFAS limits are one part of the PPWR. For the timeline and the main obligations see the PPWR checklist for packaging buyers. Food-contact materials also remain subject to Regulation (EC) No 1935/2004 and Regulation (EC) No 2023/2006 on good manufacturing practice, which are the basis for a supplier’s declaration of compliance.

Sources

Regulation (EU) 2025/40 on EUR-Lex and European Commission: packaging waste. Check the current text before you decide, because guidance and test methods for these limits are still developing.

What to send us

For food-contact use we have board with a declaration of conformity for direct food contact. Tell us the use and we confirm what documentation applies to your order. We produce boxes to your dimensions. Read the guide to buying cardboard boxes from Poland and our wholesale terms, and send your enquiry through our home page.

See also: Paper Windows and Mono-Material Cartons: Designing Corrugated Boxes for Recyclability under the PPWR

Frequently asked questions

Does the PFAS limit apply to every corrugated box?

No. It applies to packaging that comes into contact with food. A shipping carton that only holds sealed or inner-wrapped goods is normally not in direct contact with food. If food goes in unwrapped, such as pizza, bread or fried food, the carton or its liner counts as food-contact packaging.

Is “PFAS-free” the same as compliant?

Not necessarily. The regulation sets concentration limits, and “PFAS-free” can mean only that PFAS were not intentionally added, without any test. Ask for the test report and the method used.

Which limits apply and from when?

25 ppb for any single PFAS and 250 ppb for the sum of the PFAS measured by targeted analysis, with polymeric PFAS excluded, plus 50 ppm for total PFAS including polymeric PFAS. They apply to food-contact packaging placed on the market from 12 August 2026.

What can replace PFAS in pizza and takeaway boxes?

Options include board with an inner paper or bag, water-based barrier coatings, plastic-based coatings and separate greaseproof inserts. Each has trade-offs in grease resistance, recycling and cost, so test with your own food and holding time.

Can you supply documents for food-contact boxes?

For food-contact use we have board with a declaration of conformity for direct food contact. Tell us the use and we confirm what documentation applies to your order.