Auditing a Corrugated Packaging Supplier: What Industrial Buyers Check and How to Prepare a Plant Visit
An audit of a corrugated packaging supplier checks whether the plant can make the same box, to the same specification, on every delivery. Industrial buyers look at three levels: the quality system, the production process and the product. On the shop floor that means board receipt, batch traceability, die and plate storage, dimensional checks, palletising and the handling of non-conforming goods. This guide lists what to check, which documents to ask for and how to prepare a plant visit. As of 18 November 2026.
Why audit a box supplier
A box is a low-value item, but a missing or faulty one stops a packing line. Buyers audit packaging suppliers before adding a new one or moving items to it (see switching your corrugated box supplier), when they set up a second source, after repeated complaints, and when their own customers or rules require it, for example for food contact or automotive parts.
In the terms of ISO 19011, the guidelines for auditing management systems, a customer’s audit of its supplier is a second-party audit, and an audit by an independent certification body is a third-party audit. A certificate results from the latter; your own audit shows how the plant works on your items.
System, process and product audits
| Type | Question it answers | Typical reference | What to keep in mind |
|---|---|---|---|
| System audit | Is there a working quality system: responsibilities, document and change control, training, complaints, corrective actions? | ISO 9001, requirements for a quality management system | A certificate shows a third-party audit; check its scope, edition and expiry date |
| Process audit | Does production give stable results, from board receipt to dispatch? | VDA 6.3, process audit, 2023 edition | A method used by the customer’s auditor, not a certificate for the plant |
| Product audit | Do finished boxes meet the specification? | VDA 6.5, product audit, 2020 edition | Boxes taken from production or stock are checked against the drawing |
ISO 9001:2026, the new edition, was published on 16 September 2026, and certificates to the 2015 edition stay valid during a transition period, so check which edition a certificate refers to.
VDA volumes come from the German Association of the Automotive Industry (VDA). VDA 6.3 covers potential analysis, product and process development and implementation, and series production; for an existing box supplier the series-production part usually matters most. VDA 6.5 describes product audits that show the quality level of manufactured products. The VDA Quality Management Center (VDA QMC) lists certification bodies only for VDA 6.1, 6.2 and 6.4, and the VDA 6.3 certificate it issues is a qualification of the auditor, a person. A “VDA audit” of a box plant is therefore the customer’s own assessment with a VDA method. As of 18 November 2026.
What to look at on the shop floor
| Area | What to check | Question to ask |
|---|---|---|
| Board receipt | Labels and grade of incoming sheets or reels, damage and moisture, the board maker’s batch data | How is a board delivery checked against the order, and where are its test data kept? |
| Batch traceability | Pallet labels with order number and production date; records linking a delivery to the board used | Can you trace one of our recent deliveries back to its board, now? |
| Dies and plates | Storage that prevents damage, marking by customer and item, records of ownership | How do you make sure the right die and plate version is used for our item? |
| Dimensional checks | First-piece check at set-up, checks during the run, measuring tools, reference samples, records | Who releases the first pieces, and what happens if a box is out of tolerance? |
| Print and joint | Colour references and approved samples; checks of glued or stitched joints | How do you keep colours the same from one order to the next? |
| Packing and palletising | Pieces per bundle, labels, pallet pattern, wrapping, protection from moisture, finished-goods storage | How is a pallet built and labelled for our goods receipt? |
| Non-conforming goods | Blocked goods marked and kept apart, a complaint log, corrective actions with deadlines | Show us the last complaint you closed and what you changed |
For tolerances and how to measure them see tolerances on corrugated boxes; for the checks on your side when the boxes arrive see goods-receipt inspection for corrugated boxes.
Documents to ask for
- Specification and drawing of your items as agreed, with a version number and a record of changes.
- Board datasheets for the grades used (grammage, thickness, ECT) and the board makers’ batch data.
- Food-contact documents, if the boxes touch food: the declaration of conformity for the board and what it is based on.
- Environmental data from the board makers, such as recycled fibre content, carbon footprint or an environmental product declaration (EPD), if you report them.
- Certificates, if the supplier claims any: scope, edition, expiry date and issuing body, checked in that body’s register.
- Complaint procedure: how a complaint is recorded, who answers, how fast and with which resolutions.
- Supply continuity: board sources, machine breakdowns, peak planning.
On food contact: paper and board is one of the groups of materials listed in Annex I of Regulation (EC) No 1935/2004, which requires traceability at all stages (Article 17). Regulation (EC) No 2023/2006 on good manufacturing practice requires a documented quality assurance system, a quality control system and documentation (Articles 5 to 7). The European Commission lists specific EU measures for plastics, ceramics, regenerated cellulose film and active and intelligent materials, but not for paper and board, so national rules may apply. Ask which rules the supplier’s declaration refers to. This is general information, not legal advice.
Questions for the audit
- Who is responsible for quality, and who can stop a delivery?
- How are specifications and their changes controlled?
- How is incoming board checked, and from how many independent board makers do you buy?
- Can a finished pallet be traced to its order, production date and board?
- How are dies and plates stored, marked and assigned to an owner?
- Which checks are made at set-up and during the run, and how are they recorded?
- How are non-conforming boxes marked, separated and handled?
- How fast do you answer a complaint, and what are the possible resolutions?
- Have customers audited you before, and with which method?
How to prepare a plant visit
- Set the goal and scope. A first visit before a new supplier starts, a process audit of selected items and a follow-up after complaints need different questions.
- Send the agenda and questionnaire in advance, with the items you want to follow and their drawings.
- Agree the practical points: date, participants, safety rules and protective equipment, photos, and confidentiality in both directions, because other customers’ products are on the floor too.
- Follow the flow of material: board receipt, conversion, printing, gluing or stitching, checks, packing, dispatch.
- Trace one real delivery from the pallet label back to the board and the checks made.
- Close with a summary of findings before you leave, then send a written report with agreed actions and deadlines.
- Follow up on the next deliveries or at a second visit. A video walk-through can prepare a visit but not replace it.
How we work with auditing customers at Kartoniki.eu
We welcome customer visits and audits at our plant in Lubartów, Poland, also on VDA principles, and we have been audited several times by different customers. Customers who need an assessment audit us directly, with their own questionnaire or a VDA method.
- Plant: a manufacturer of corrugated packaging with over 3,000 m² of production space, on the market since 2019; the people we employ have 20 years of experience in packaging.
- Board: we buy board sheets from at least two independent board makers; board parameters (ECT, BCT) come from our board suppliers’ tests for every batch; we have board with a declaration of conformity for direct food contact.
- Tools: a die paid for by the customer belongs to the customer, and we store it under a safekeeping agreement; we keep printing plates for 12 months from the last order of a design.
- Complaints: send photos, measurements and the delivery number; the first response comes within 24 hours on working days, and resolutions (replacement, a corrective invoice, a refund, collection of defective goods) are set out in the contract.
- Data and reviews: we can provide supplier data on the board, such as recycled fibre content, carbon footprint or EPD, on request, and we can help you review your packaging against the PPWR.
- Contact: one person approves the price, the date and unusual terms, usually on the day of the enquiry, and you call the person who runs your order and knows production directly. We sign an NDA on request.
For the questions buyers ask before a first order, see corrugated packaging for business buyers: 15 answers.
Sources
VDA QMC: VDA 6.3 process audit, 2023 edition, VDA 6.5 product audit, 2020 edition, certification bodies for VDA 6.X and VDA 6.3 FAQ. ISO: ISO 19011:2026 (guidelines for auditing management systems) and ISO 9001:2026 (quality management systems). EUR-Lex: Regulation (EC) No 1935/2004 and Regulation (EC) No 2023/2006; European Commission: food contact materials legislation. Check the current editions before you decide.
What to send us
Tell us the goal of the visit, the items you want to follow and your questionnaire, and we will agree a date. Write to us through our home page.
Frequently asked questions
What is the difference between a system, a process and a product audit?
A system audit checks the quality management system: responsibilities, document and change control, complaints and corrective actions. A process audit checks whether production gives stable results, from board receipt to dispatch. A product audit checks finished boxes against the specification.
Is VDA 6.3 a certificate for a plant?
No. VDA 6.3 is a process audit method and VDA 6.5 a product audit method that customers use with their suppliers. The VDA QMC lists certification bodies for VDA 6.1, 6.2 and 6.4, and the VDA 6.3 certificate it issues is a qualification of the auditor.
Does a box supplier need ISO 9001?
That depends on your requirements and those of your customers. A certificate shows that a certification body audited the quality system; it does not replace your own check of how the plant makes your items. We welcome customer audits at our plant and have been audited several times by different customers.
What should we check first on the shop floor?
Follow one real delivery from the pallet label back to the board delivery, the die and plate used, and the checks made at set-up and during the run. If the plant can show this quickly, its traceability works.
Which documents should a box supplier provide?
The agreed specification with a version number, board datasheets and batch data, a declaration of conformity for food contact if the boxes touch food, any certificates the supplier claims, its complaint procedure and, if you report them, environmental data from the board makers.
Can a supplier audit be done remotely?
A video walk-through and a document review can prepare a visit. For VDA 6.3, the VDA QMC states that a purely remote audit cannot represent a fully comprehensive process audit, while a hybrid audit can, taking into account the risk.
Can we visit or audit your plant?
Yes. We welcome visits and audits at our plant in Lubartów, Poland, also on VDA principles, and we have been audited several times by different customers. We sign an NDA on request.
How fast do you answer a complaint?
The first response comes within 24 hours on working days. Send photos, measurements and the delivery number. Resolutions such as replacement, a corrective invoice, a refund or collection of the defective goods are set out in the contract.