FEFCO 0210: Slotted Box with Large Tuck-In Flaps – How It Differs from 0201, 0203 and 0211
FEFCO 0210 is a one-piece slotted box whose top and bottom are each closed by one large flap, both hinged to the same long panel and each ending in a tuck-in tab. The short panels carry shorter flaps and the second long panel has none. The box ships flat and the FEFCO code marks it for manual erection. It differs from the standard 0201 and from its near neighbour 0211. This guide follows the FEFCO code, 12th edition (2022), as of 6 November 2026.
FEFCO 0210 at a glance
| Feature | FEFCO 0210 |
|---|---|
| FEFCO group | 02, slotted boxes |
| Construction | One piece with a manufacturer’s joint (glued, stitched or taped), delivered flat |
| Top and bottom | One large flap each, both on the same long panel, each ending in a tuck-in tab |
| Short panels | Shorter flaps at the top and bottom |
| Second long panel | No flaps |
| Assembly mark in the code | M, usually manual erection |
How the flaps are arranged
The FEFCO code describes group 02 as boxes made basically from one piece, with a glued, stitched or taped manufacturer’s joint and flaps at the top and bottom. They are shipped flat, ready to use, and are closed with the flaps provided. In the drawing of 0210 the first long panel (L) carries a large flap at the top and another at the bottom. Each is about as deep as the box is wide (B), has rounded corners and ends in a tuck-in tab formed by an extra crease near the free edge. The two short panels (B) carry shorter flaps, top and bottom, which suppliers call dust flaps, and the second long panel carries none. The large flap closes over the shorter flaps and tucks into the box.
0210 compared with its neighbours
| Code | Flaps as drawn in the FEFCO code | Assembly mark |
|---|---|---|
| 0201 | All flaps of the same depth; the outer flaps are ½B deep and meet in the middle | M/A |
| 0202 | Outer flaps longer than ½B, so that they overlap in part | M/A |
| 0203 | Outer flaps as deep as B, so that they overlap completely | M/A |
| 0210 | Two large tuck-in flaps on the same long panel, shorter flaps on the short panels | M |
| 0211 | Two large tuck-in flaps on opposite long panels, so the top and the bottom open from opposite sides | M |
| 0212 | One large tuck-in flap at the top, flaps of ½B at the bottom | M/A |
Other 02 codes, such as 0204 and 0209, use different flap depths again. For 0201 against 0203 see FEFCO 0201 vs 0203, and for the full list the catalogue of FEFCO codes.
When 0210 fits
Supplier catalogues show 0210 mainly as a folding box that closes with tuck-in tabs and can be opened and closed again, for example in retail and presentation packaging. It suits you if:
- you pack by hand and want the lid to open from one long side;
- you prefer one large closing flap to two flaps that meet in the middle;
- the box has to close without tape, or with only a strip of tape for the journey.
Consider another code if you pack by machine (0201 or another code marked M/A), if the top and the bottom should open from opposite sides (0211), if you want a fully overlapping top (0203) or if the goods are flat and shallow (FEFCO 0401).
Blank size and tooling
Each large flap is about as deep as the box is wide, so the blank is tall across the flaps. Illustration, not an offer: for a box of 300 × 200 × 100 mm internal, the blank is 100 + 100 + 100 = 300 mm high across the flaps for 0201 (flaps of ½B) and 100 + 200 + 200 = 500 mm for 0203 (flaps of B). For 0210 it is also 500 mm plus the two tuck-in tabs, but only the first long panel uses that height, so the outline of the blank is stepped. A stepped outline with shaped tabs is normally cut with a die, unlike a plain slotted blank. The die and other one-off costs are stated in the quote: see one-off costs for custom boxes.
Manual or machine packing
In the FEFCO code M means usually manual erection, A usually automated and M/A either, and the marks reflect current practice. 0210 is marked M, so plan for hand packing: the packer folds the shorter flaps, closes the large flap and pushes the tab in. If you use a case erector or a fast line, tell us before you fix the code, because slotted boxes such as 0201 are marked M/A. On request we can try a carton on your packing line and show your team how to pack it.
How to specify FEFCO 0210
- Code and drawing: 0210, with a drawing or a sample if you have one.
- Internal size: length × breadth × height in millimetres. The code gives sizes as internal dimensions: L is the longer side of the opening, B the shorter and H the depth from the base to the top of the opening. See internal or external dimensions.
- Opening side: the large flaps sit on one long panel, so say which side of the box should open.
- Contents: what goes in, how many pieces and how they are packed, so that we can propose the board. We offer 3-layer E, B and C, 5-layer EB, BE and BC, heavy 5-layer AC and 7-layer AAC board.
- Print and finish: colours, a vector logo and any finish you need.
- Closure and packing: tuck-in only or with tape as well, by hand or by machine, and how many boxes a day.
Common mistakes
- Taking the name for the drawing. Descriptions of 0210, 0211 and 0212 vary between catalogues and guides, so check the drawing in the code and a sample before you order.
- Mixing up 0210 and 0211. Decide from which side the top and the bottom should open.
- Assuming machine packing. 0210 is marked M, so ask before it goes on a case-erecting line.
- Overlooking the taller blank. The large flaps make the blank taller than for 0201, which affects board use and tooling.
- Mixing internal and external sizes. Always say which one you give.
What to send us
Send the details above through our home page. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. We produce boxes to your dimensions. Read the guide to buying cardboard boxes from Poland before you order.
Sources
FEFCO code, 12th edition (2022), on the FEFCO website: group definitions, design numbers and assembly marks. The flap arrangement of 0210 and its neighbours follows the drawings in the code. Uses come from supplier catalogues, whose descriptions of 0210 to 0212 are not always consistent, so confirm the construction against a drawing or a sample.
Frequently asked questions
What is FEFCO 0210?
It is a one-piece slotted box from group 02 of the FEFCO code. Its top and bottom are each closed by one large flap, both hinged to the same long panel and each ending in a tuck-in tab. The short panels carry shorter flaps and the second long panel has none. It is delivered flat, and the code marks it for manual erection.
How does FEFCO 0210 differ from 0201?
In 0201 all flaps have the same depth, and the outer flaps are half the box width and meet in the middle. In 0210 the top and the bottom are each closed by one large flap that reaches across the box and tucks in, so the blank has a stepped outline instead of the plain slotted shape of 0201.
What is the difference between FEFCO 0210 and 0211?
Both have two large tuck-in flaps. In 0210 they are hinged to the same long panel, so the top and the bottom open from the same side. In 0211 they are hinged to opposite long panels, so the top and the bottom open from opposite sides.
Does FEFCO 0210 need tape?
It is designed to close with its tuck-in tabs. The code defines the blank and not the closure, so you can add tape if the contents or the journey call for it. Say so in your enquiry and we confirm the solution in the quote.
Can FEFCO 0210 be erected by machine?
The FEFCO code marks 0210 with M, which means usually manual erection, and notes that the marks reflect current practice. Slotted codes marked M/A, such as 0201, can be erected by hand or by machine. If you use a case erector, tell us before you choose the code. We can try a carton on your packing line.
What do I send to get a quote for FEFCO 0210?
The code or a drawing, the internal size as length × breadth × height in millimetres, which side of the box should open, what goes in the box so that we can propose the board, print and closure requirements, and the quantity.