FEFCO 0401: The One-Piece Folder (Maltese Cross) Box – What It Is and When to Choose It
FEFCO 0401 is a one-piece folder box, also called a Maltese cross box. It is cut from one sheet of corrugated board as a cross: a base panel, two end walls with narrow dust flaps and two long walls that each continue into half of the lid, the two halves meeting in the middle. The FEFCO code marks it for manual erection. It is mostly used for flat or shallow goods. This guide follows the FEFCO code, 12th edition (2022), as of 6 November 2026.
FEFCO 0401 at a glance
| Feature | FEFCO 0401 |
|---|---|
| FEFCO group | 04, folder boxes and trays |
| Construction | One piece, cut as a cross and delivered flat |
| Walls and lid | Two short walls with dust flaps, and two long walls that each continue into a lid half of ½B; the halves meet in the middle |
| Manufacturer’s joint | None shown in the code drawing |
| Assembly mark in the code | M, usually manual erection |
| Typical goods (supplier catalogues) | Flat or shallow goods such as books, calendars, framed pictures, small electronics |
What the code says
The first two digits of a FEFCO code give the group and the last two the design. Group 04 is folder boxes and trays, which the code describes as usually made from one piece of board, with the bottom hinged to form two or all of the side walls and the cover. Locking tabs, handles or display panels can be built into some designs. Telescope boxes, where a lid fits over a separate base, are group 03, so 0401 is not a telescope box.
In the drawing of 0401 the base panel sits in the centre of the cross. A wall with a narrow strip at its top edge, folded in as a dust flap, is attached to each short side. A wall attached to each long side continues into a lid half that is ½B wide, half the width of the box. The drawing shows no manufacturer’s joint, the glued, stitched or taped seam of a slotted box, so the box is delivered flat as a cross and folded around the product.
Where 0401 fits and where it does not
Supplier catalogues list 0401 for flat or shallow goods such as books, calendars, framed pictures and artwork, and for point-of-sale items sent to many destinations. The box wraps the product rather than enclosing a deep volume, and its lid is two halves that meet in the middle. For deep, loose or heavy goods a slotted box (group 02) or a telescope box (group 03) is usually the better starting point.
0401 and related codes
| Code | What the FEFCO drawing shows | Assembly mark |
|---|---|---|
| 0401 | Cross-shaped blank: two short walls with dust flaps, two long walls each with a ½B lid half | M |
| 0402 | Cross-shaped blank: every wall continues into a lid panel (½L or ½B), so the top is covered from all four sides | M |
| 0427 | The one-piece mailer of the same group, with a hinged lid: FEFCO 0427 and corrugated mailers | M |
| 0201 | Slotted box with a manufacturer’s joint and four flaps at the top and bottom, closed with the flaps | M/A |
| 0210 | Slotted box with large tuck-in flaps: FEFCO 0210 | M |
For all other codes see the catalogue of FEFCO codes.
Manual or machine packing
In the FEFCO code M means usually manual erection, A usually automated and M/A either. The code says these marks reflect current practice and are extra information for specifiers and users. 0401 is marked M: the packer lays the blank flat, puts the product in the centre and folds the walls and the lid halves around it. If you plan to use a case erector or a fast packing line, tell us before you fix the code, because slotted boxes such as 0201 are marked M/A. On request we can try a carton on your packing line and show your team how to pack it.
How the box is closed
The code defines the blank, not the closure. It lists four ways to close a box, alone or combined: gluing, taping, interlocking and stitching. Suppliers describe 0401 differently: some close the folds with a strip of tape, others say it folds shut without glue or tape. Decide how the box must stay closed, for example in transit or on a shelf, and say so in your enquiry.
How to specify FEFCO 0401
- Code and drawing: 0401, with a drawing or a sample if you have one.
- Internal size: length × breadth × height in millimetres. The code gives sizes as internal dimensions: L is the longer side of the opening, B the shorter and H the depth from the base to the top of the opening. See internal or external dimensions.
- Product: its flat size and thickness, how many pieces go in one box and whether there is an insert or wrapping, so that the depth is set correctly.
- Board: the flute, or the product so that we can propose one. We offer 3-layer E, B and C, 5-layer EB, BE and BC, heavy 5-layer AC and 7-layer AAC board. If the flute direction matters, mark it on your drawing; the code uses the symbol FD.
- Print and finish: colours, a vector logo, and whether the artwork has to cross the centre line where the lid halves meet.
- Closure and packing: with tape or without, by hand or by machine, and how many boxes a day.
Common mistakes
- Calling it a telescope box. A lid and a base that fit over each other are group 03. 0401 is one piece.
- Mixing internal and external sizes. Always say which one you give.
- Using it for deep or loose contents. The depth is limited and the lid is two halves, so add an insert or choose another family.
- Ignoring the seam. A print or a label on the lid has to allow for the centre line.
- Leaving the closure open. If it is not stated, buyer and supplier may assume different things.
Tooling and one-off costs
Folder boxes are cut as shaped blanks, so series production normally uses a cutting die. The die, a printing plate, a sample and artwork preparation are one-off costs that we state in the quote: see one-off costs for custom boxes. We make die-cut boxes up to 260 × 150 cm.
What to send us
Send the details above through our home page. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. We produce boxes to your dimensions. Read the guide to buying cardboard boxes from Poland before you order.
Sources
FEFCO code, 12th edition (2022), on the FEFCO website: group definitions, design numbers and assembly marks. The construction of 0401 follows the drawing in the code. Uses and the name Maltese cross come from supplier catalogues, and closing methods differ between suppliers, so confirm them against a drawing or a sample.
Frequently asked questions
What is FEFCO 0401?
It is a one-piece folder box from group 04 of the FEFCO code. It is cut from one sheet of corrugated board as a cross: a base panel, two end walls with dust flaps and two long walls that each continue into half of the lid. It is delivered flat and folded around the product, and the code marks it for manual erection.
Is FEFCO 0401 a telescope box?
No. Telescope boxes, in which a lid fits over a separate base, belong to group 03. FEFCO 0401 is in group 04, folder boxes and trays, and is made from one piece of board.
How does FEFCO 0401 differ from 0402?
Both are cross-shaped folder boxes. In 0401 only the two long walls continue into lid halves, and the end walls carry narrow dust flaps. In 0402 every wall continues into a lid panel, so the top is covered from all four sides.
Is FEFCO 0401 closed with tape or without?
The code defines the blank and not the closure. Some suppliers close the folds with a strip of tape, others describe the box as folding shut without glue or tape. Tell us how the box has to stay closed and we confirm the solution in the quote.
Can FEFCO 0401 be erected by machine?
The FEFCO code marks 0401 with M, which means usually manual erection, and notes that the marks reflect current practice. If you plan to use a case erector, tell us before you choose the code. We can try a carton on your packing line.
What do I send to get a quote for FEFCO 0401?
The code or a drawing, the internal size as length × breadth × height in millimetres, the product and how many pieces go in one box, the board or the product so that we can propose one, print and closure requirements, and the quantity.