What Drives the Price of Custom Corrugated Boxes – and Which One-Off Costs to Expect

The price of a custom corrugated box depends on how much board it uses, the type of board, the construction, the print and finishing, and the size of the run. Some jobs also carry one-off costs for a cutting die, printing plates, a plotter sample or design work. Because these are spread over the whole run, a larger or repeated order is usually cheaper per box. This guide explains each factor, without prices, and lists what to send for quotes you can compare. Status: 6 November 2026.

What makes up the price of a custom box

These eight factors shape the price of every box. One-off costs follow in the next section.

1. Board use: dimensions, FEFCO code and layout

A box is cut from a flat blank, and the area of that blank decides how much board it uses; the area grows faster than the dimensions. Illustration, not an offer: scale a slotted box (FEFCO 0201) of 300 × 200 × 100 mm internal by 10% in every dimension, to 330 × 220 × 110 mm. The blank becomes 10% longer and 10% wider, so its area grows by 1.1 × 1.1 = 1.21, about 21% more board (the exact figure depends on the glue flap).

The FEFCO code fixes the shape of the blank as well: 0203, with fully overlapping outer flaps, needs a taller blank than 0201, whose outer flaps meet in the middle. Board left unused around the blanks on a sheet is waste, so ask whether a small change of one dimension saves board. See the catalogue of FEFCO codes.

2. Type of board

Board is described by its layers, flute, paper grammage and ECT, the edgewise crush resistance measured under ISO 3037. More layers, heavier or stronger papers and a higher ECT raise the price per square metre. We offer 3-layer E, B and C, 5-layer EB, BE and BC, heavy 5-layer AC and 7-layer AAC board; the heaviest grades are made to order. Compare offers by board symbol and ECT, not by weight per square metre alone.

3. Construction and joining

A slotted box (FEFCO group 02, for example 0201) needs only straight cuts and creases and is normally made on an in-line printer, slotter and folder-gluer, so it can be made without a cutting die. A shaped construction, such as a folder box or tray from group 04, is cut on a die-cutter, so it needs a die and more set-up. The joint is glued, stitched or taped; stitching, dividers and inserts are extra operations or parts and can add cost.

4. Print

An unprinted box is the baseline. Flexographic print, up to 4 colours, needs a printing plate for each colour, so the price rises with the colours, the printed area and the designs. Digital print, including UV, needs no plates and suits short runs and many designs. The break-even point depends on the format, the colours and the designs, so we set it in the quote.

5. Finishing

Each finishing step adds material and an operation: litho-lamination (a printed sheet laminated onto the board), varnish over the whole surface or in selected areas, film coating, foil effects such as gold or silver, a window. They pay off where the customer sees the box, less so on a plain shipping carton.

6. Run size and number of versions

Tooling, set-up and design are fixed work that does not depend on the number of boxes, so a larger run lowers the cost per box (see below). Every extra size or design needs its own set-up and, where tools are involved, its own tools.

7. Packing, palletising and transport

Boxes are normally delivered flat on pallets. A particular pallet type or load height, layer pads, PP strapping, stretch film or cardboard corner protectors add material and time. Delivery to other EU countries is agreed individually: by freight forwarder or courier, or you collect the goods from our plant in Lubartów, Poland. Its cost depends on the destination, the volume and the number of pallets.

8. Deadline

Most orders are delivered within 7 days (max. 16 working days). Longer cases usually involve agreeing the design, trial prints, plotter samples, waiting for a cutting die or a very complex construction. Express orders are possible on request, but they need a changed production plan and universal sheets, which produce more waste, so they cost clearly more than standard handling. For other EU countries the date is the one in the quote.

One-off costs: die, plates, samples and design

One-off costs pay for preparing a job, not for the boxes themselves, and not every order has them: a plain slotted box without print can be made without a die and without plates. Some suppliers show them as separate lines and others spread them into the price per box, so ask for them listed separately. The quote states the amounts, which depend on the size, the construction and the print.

One-off item What it is When it appears On a repeat order
Cutting die Cuts and creases the blank; made for one blank shape Shaped constructions, for example most folder boxes and trays of FEFCO group 04 Reused while size and board stay the same
Printing plate One flexographic plate for each colour of each design Flexographic print; digital print needs none Reused for the same design; a changed design needs new plates
Plotter sample A sample cut on a digital cutting table (plotter) without a die A new construction or size, to check the fit before the die is made Needed again only if the construction changes
Design and prototype The drawing of the blank, the artwork on it and a physical prototype A new construction, or no print-ready artwork yet Again only when the design changes

Prototypes and samples. We design new constructions and make physical prototypes. A prototype is sometimes free; in some cases we charge a symbolic fee deducted from the order value, and design costs may be added. We state the terms in the quote.

Who owns a cutting die. A cutting die paid for by the customer belongs to the customer. We store it under an agreement, and the details are settled individually.

When a larger run pays off

Each box carries a share of the one-off and set-up costs: those costs divided by the number of boxes. Doubling the run halves that share, while the board, print and labour per box change little. So the first increases of the run lower the price per box the most, and later ones less and less.

A larger run pays off sooner when the one-off costs are high: a shaped box with multi-colour flexographic print has high one-off costs, a plain slotted box almost none. Once the share is small, storage space, money tied up in stock and the risk of changing the design outweigh the saving. For regular customers we can produce a larger batch once and deliver it in parts on call-off.

We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. See short runs of custom-size boxes. Compare quotes on the total for your quantity: a lower price per box can come with higher tooling costs.

Price factors at a glance

Factor How it affects the price What you can do
Box size A larger blank uses more board, and the area grows faster than the dimensions Fit the box to the product; ask if a small change of one dimension saves board
Construction Shaped styles and extra parts cost more than a plain slotted box Use a slotted style wherever it is enough
Board More layers, heavier paper and a higher ECT raise the price Choose the board for the real load and stack; confirm it with a prototype
Print More colours, printed area and designs raise the price Limit colours and designs; use digital print for short runs; send print-ready artwork
Finishing Lamination, varnish, film or foil each add cost Use them only where the customer sees the box
Tooling A die or plates add a one-off cost that returns when size, board or design changes Keep size, board and design stable; test a prototype before tools are made
Run size and sizes A larger or repeated order lowers the cost per box, but the effect flattens; each extra size needs its own set-up Give the yearly volume; keep a few sizes; consider call-off
Packing and delivery Special pallets, load heights, layer pads and strapping add material and time; transport depends on destination, volume and pallets Use a standard pallet; state the maximum load height; combine orders
Deadline A deadline shorter than standard raises the price clearly Plan ahead; settle the specification early

How to get quotes you can compare

Ask every supplier to quote the same specification. Send these details:

  • Internal dimensions: length × width × height in millimetres, stated as internal (internal or external dimensions).
  • Construction: the FEFCO code, a drawing or a sample; if you do not know it, describe how you pack the product.
  • Product: weight, type and shape, and sensitivities such as moisture, glass or sharp edges.
  • Quantity and frequency: the first order, the expected yearly volume, repeat orders or call-off.
  • Print and finishing: colours, printed area, a vector logo, lamination, varnish or film.
  • Packing and palletising: pallet type, maximum load height, layer pads, strapping, stretch film, corner protectors.
  • Tolerances: the standard ones, or tighter ones if you need them (tolerances).
  • Deadline and delivery: the date, the country and address, and a freight forwarder, a courier or collection.

Then compare point by point: the board symbol with its ECT, the one-off costs listed apart from the price per box, the tolerances and the delivery terms. More questions to put to a supplier are in corrugated packaging for business buyers: 15 answers.

Sources

FEFCO code, 12th edition (2022), on the FEFCO website; FEFCO: the regular slotted case; ISO 3037:2022 (ECT). The explanations of cost drivers, tooling and print describe general industry practice. Prototype terms, die ownership, delivery, deadlines and express handling are our own terms as of 6 November 2026. We give no prices, because they depend on your specification.

What to send us

Send the details from the checklist through our home page. On working days you receive a quote within a few hours, with the price and the confirmed delivery date. We produce boxes to your dimensions. See our wholesale terms if you buy for resale.

See also: A Second Supplier for Corrugated Boxes: When Dual Sourcing Makes Sense and How to Start

See also: Custom Box Price Calculator: How to Get an Indicative Price in Your Currency and How to Read the Result

See also: Comparing Corrugated Packaging Quotes: Total Cost of Ownership Beyond the Unit Price

Frequently asked questions

How much does a custom corrugated box cost?

It depends on the specification, so we do not publish a price per box. The main drivers are board, construction, print and finishing, run size, delivery and any one-off costs. Send the details from the checklist, and on working days you receive a quote within a few hours, with the price and the confirmed delivery date.

Why do quotes for the same box differ so much?

Usually because the specifications differ. Compare the board symbol and ECT, the construction and internal dimensions, the tolerances, print and finishing, packing and pallets, delivery terms and the quantity behind the price. Check whether tooling is in the price per box or listed separately, and ask every supplier to quote the same specification.

Which one-off costs should I expect when ordering custom boxes?

A cutting die for shaped constructions, printing plates for flexographic print, a plotter sample or prototype for a new construction, and design work if you have no drawing or print-ready artwork. A plain slotted box without print can be made without a die and without plates. We state the one-off costs in the quote.

Is a prototype free?

Sometimes. A prototype can be free; in some cases we charge a symbolic fee that we deduct from the order value, and design costs may be added. We state the terms in the quote.

Who owns a cutting die that I pay for?

A cutting die paid for by the customer belongs to the customer. We store it under an agreement, and the details are settled individually.

Does digital print remove the need for printing plates?

Yes. Digital print, including UV, needs no plates, so it suits short runs and many designs. Flexographic print needs a plate for each colour and pays off on long repeat runs, where the plate costs are spread over many boxes. The exact threshold depends on the format, the colours and the designs, so we set it in the quote.

Does a larger order always lower the price per box?

Usually, because one-off and set-up costs are spread over more boxes, but the effect flattens as the run grows and is small for a plain box with no tooling. Weigh it against storage space, money tied up in stock and the risk of changing the design. For regular customers we can produce a larger batch once and deliver it in parts on call-off.

How can I lower the price without weakening the box?

Fit the box to the product, use a slotted construction where it is enough, choose the board for the real load and not for the worst case, limit colours and designs, and keep the size, the board and the artwork the same between orders. Confirm any change of board with a prototype or a test.