FEFCO 0711 and 0713: Crash-Lock Bottom Boxes – When to Choose Them and How to Specify Them
FEFCO 0711 and FEFCO 0713 are ready-glued corrugated cartons with an automatic (crash-lock) bottom. In the FEFCO code they belong to group 07: one piece, glued at the factory, delivered flat and set up by opening the carton, with no tape needed at the bottom. They differ at the top. FEFCO 0711 has four flaps that meet in the middle, like a standard 0201 box. FEFCO 0713 has one large lid flap with a tuck-in tab and two short end flaps. General information as of 6 November 2026.
What the FEFCO code says about 0711 and 0713
The International Fibreboard Case Code, developed by FEFCO and ESBO and published by FEFCO (current edition: the 12th, 2022), describes group 07 as ready-glued cases: basically one piece, shipped flat and ready to use by simple assembly. Each style is shown as a drawing with its number and an erection mark. In the drawings:
- FEFCO 0711 has an automatic bottom and four top flaps, one on each wall, arranged as in a regular slotted box (0201). The flaps meet in the middle and are normally sealed with tape.
- FEFCO 0713 has an automatic bottom and one large lid flap hinged on a long wall, as deep as the carton is wide and ending in a tuck-in tab, plus two short end flaps. The opposite long wall has no flap, so the tab tucks in along it.
The code marks both styles M, meaning usually erected by hand. Product descriptions from independent suppliers match these drawings, but some use the terms loosely, so confirm the style with a drawing or a sample before you order.
FEFCO 0711 and 0713 compared with 0201
| Feature | FEFCO 0201 | FEFCO 0711 | FEFCO 0713 |
|---|---|---|---|
| Group in the code | 02, slotted-type | 07, ready-glued | 07, ready-glued |
| Bottom | Four flaps that meet in the middle, closed with tape | Automatic (crash-lock), pre-glued, no tape | Automatic (crash-lock), pre-glued, no tape |
| Top | Four flaps that meet in the middle | Four flaps that meet in the middle | One lid flap with a tuck-in tab, two short end flaps |
| Erection mark in the code | M/A (manual or automated) | M (usually manual) | M (usually manual) |
| Cutting die | Usually not needed | Normally needed (shaped bottom flaps) | Normally needed (shaped bottom flaps and lid tab) |
| Choose it when | A machine erects and tapes the cartons, or you want a taped bottom | Packers work by hand and tape the top as on a standard box | Packers work by hand and you want a single hinged lid |
When to choose 0711 or 0713
Hand packing in volume. The automatic bottom replaces folding and taping four bottom flaps: the packer opens the flat carton, presses it into shape and the bottom locks. That suits order picking and e-commerce lines.
Hand or machine. The code marks 0201 M/A (manual or automated erection) but 0711 and 0713 only M. The marks describe current practice, not a rule, and some suppliers list machine erecting for 0711. If a machine erects your cartons, name it in the enquiry and we confirm in the quote whether the style and size are practical.
Flaps or lid. Choose 0711 if your packers already tape the top seam of a standard box, and 0713 if you want a single hinged lid, for example on retail or gift packs that the customer opens. We also make e-commerce cartons with an automatic bottom, an adhesive strip and a tear strip: tell us if you need them.
Weight and strength. The code describes shapes, not strength, and we do not quote kilogram ratings. Compare boards by ECT and BCT (ECT, BCT and the McKee formula) and test a sample with your product. For heavy, dense or sharp-edged goods, ask whether a taped bottom, as in 0201 or 0203 (0201 vs 0203), is the safer choice.
Dimensions. The code uses inside dimensions in mm: L is the longer side of the opening, B the shorter side and H the distance from the opening to the base (internal or external dimensions). Not every combination of L, B and H works in a ready-glued carton; we confirm feasibility in the quote. If the product height varies, ask about height-reduction creases.
Gluing and tooling. The joint and the bottom are glued at the factory. The joint can be an extension of a short or a long wall: tell us if its position matters for the print or for your machine. The shaped bottom flaps are normally cut with a cutting die, and we state any one-off tooling cost in the quote.
When another style fits better
If a machine erects and tapes the cartons, 0201 or 0203 is the usual choice. For flat, light products and a tape-free closure, a folder-type mailer such as 0427 may suit better (FEFCO 0427 and corrugated mailers). The FEFCO code catalogue lists the other ready-glued styles, such as 0701 and 0703, and the other families.
What to include in your enquiry
- The code, or a description of the top you want: four flaps that meet (0711) or a lid with a tuck-in (0713). A drawing or a sample helps.
- Inside dimensions L × B × H in mm, and any outside limit set by a carrier, a parcel locker or a pallet.
- The product: its size and weight, and whether it is loose, bagged or held in an insert.
- The board: your required parameters, or how you ship and stack the cartons, and we propose a board: 3-layer (E, B or C), 5-layer (EB, BE, BC or heavy AC) or 7-layer (AAC). If you need AC or AAC, say so early, so we can confirm that the style is practical in that board.
- Print and finish: plain, printed outside or inside, varnished or film-coated. If the board touches food, tell us: we have board with a declaration of conformity for direct food contact.
- How the cartons are erected and closed: by hand or by a machine (name the model); with tape, or with an adhesive strip and a tear strip.
- The quantity per order and per year, and whether you want call-offs.
- The delivery address and country, and any pallet limits. Delivery within the EU is agreed with you.
Typical mistakes
- Ordering by code alone. The code names a style. It does not set the board, size, print, closure or tolerances, and a style version can be specific to a manufacturer, so two cartons sold as 0711 may differ in details.
- Trusting trade names. “Crash-lock”, “automatic bottom” and “auto-lock” are used loosely. 0215 also has a self-locking bottom, but it is folded by hand and is not glued at the bottom. 0701 has a similar top to 0711 but differently cut bottom flaps. Check the drawing or a sample.
- Mixing up dimensions. Outside sizes, or L, B and H in another order, give a carton that does not fit.
- Expecting the tuck-in to act as a seal. It interlocks, which is a different closure from a taped seam. The code allows closures to be combined, so if the cartons will be handled roughly or stacked, say how you want them closed.
Sources
The group 07 pages of the FEFCO code (12th edition, 2022) and the general notes of the 11th edition (2007) on dimensions, erection marks and closures, compared with product descriptions from independent suppliers. The drawing in the edition you use prevails over any summary, including this one.
Send us your enquiry
We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. Most orders are delivered within 7 days (max. 16 working days); a new cutting die or a sample can take longer, and we say so in the quote. Send your enquiry through our home page.
Frequently asked questions
What is the difference between FEFCO 0711 and FEFCO 0713?
Both are ready-glued cartons from group 07 with an automatic (crash-lock) bottom, delivered flat. FEFCO 0711 has four top flaps that meet in the middle, like a standard 0201 box, and is normally sealed with tape. FEFCO 0713 has one large lid flap with a tuck-in tab on a long wall and two short end flaps, so it opens like a cover. Suppliers word these tops differently, so check the drawing or a sample.
Is FEFCO 0711 just 0201 with an automatic bottom?
Close, but not quite. The top of 0711 is drawn like 0201, with four flaps that meet in the middle. The bottom is pre-glued and locks automatically, the code marks 0711 for manual erection (0201 is marked M/A), and the shaped bottom flaps normally need a cutting die, which 0201 usually does not. Choose 0201 when a machine erects and tapes the cartons or when you want a taped bottom.
Does a crash-lock bottom need tape?
No tape is needed at the bottom: the glued flaps lock when the carton is opened and pressed into shape. The top still has to be closed. A 0711 is normally taped. A 0713 closes with its tuck-in lid, which you can combine with tape if you want a firmer closure.
Can a machine erect FEFCO 0711 or 0713?
The FEFCO code marks both as usually erected by hand (M), while 0201 is marked M/A. The marks describe current practice, not a rule, and some suppliers list machine erecting for 0711. If you use an erecting machine, name it in your enquiry and we confirm in the quote whether the style and size are practical.
How much weight can a crash-lock carton carry?
The FEFCO code describes shapes, not strength, and we do not quote kilogram figures. Strength depends on the board, the dimensions, the product and the way the cartons are stacked and shipped. Tell us the product weight and the shipping conditions, and we propose a board and recommend testing a sample with your own product.
Can I order a prototype or a short run?
We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote.