Hay Feeder Made from One Sheet of Corrugated Board: a Packaging Case Study

Most cartons have done their job the moment the customer opens them. This one starts working at that moment. A Polish producer of food for rabbits and small rodents needed packaging that carries hay to the shop and, at home, becomes the feeder. We made it from a single die-cut sheet of corrugated board, with no glue and no tape.

The project in short

  • Client: a Polish producer of food for rabbits and small rodents.
  • Task: a package that works as a hay feeder once it is opened.
  • Construction: a one-piece die-cut carton with a ladder of seven slots in one wall and a lid that opens from the top.
  • Board: 3-layer, B flute, grey, no print.
  • Size: about 30 × 20 × 14 cm, holds 350 g of hay.
  • Assembly: folded without glue or tape.

The challenge

Hay is the basis of the diet of rabbits, guinea pigs and chinchillas. It is light, bulky and crumbles whenever it is moved. The package had to do two things at once: travel safely through the warehouse and the courier network, and then give the animal easy access to the hay, so that the hay stays in the carton instead of ending up on the cage floor.

The idea: a ladder cut into the wall

Instead of adding a plastic feeder to the box, we cut the feeder into the board itself. One wall has seven vertical slots that form a ladder. The hay lies behind it inside the carton, and the animal pulls it out through the slots a little at a time.

Assembled hay feeder made of grey corrugated board: open lid and a ladder of seven slots inside the carton
The assembled feeder: open lid and the ladder of seven slots.

One sheet, nothing extra

The feeder is made from one sheet of grey 3-layer board with B flute, cut with a cutting die. The slots, the locks and the fold lines are made in one pass, so there are no separate inserts to fit. The customer folds the carton without glue or tape, fills it with hay and closes the lid. The lid opens from the top, so the feeder can be refilled later. For the wider choice of such constructions see our guide to die-cut boxes.

Unfolded blank of the hay feeder with the seven cut slots of the ladder
The same feeder before folding: one blank with the ladder already cut out.

Two sample runs and a lesson about slot width

With packaging that has a function we do not guess. We draw the construction first and cut plotter samples. The first run showed that the slots were too narrow and the hay was hard to pull out. In the second run we widened the slots, and only that version went into production. Small differences in slot width decided whether the package works in practice. Trial runs of this kind are described in short-run corrugated cartons.

From the first enquiry to repeat orders

The first batch took about 30 days, counting the design, two sample runs and the making of the cutting die. When the construction was ready, the client came back with further orders, which we complete in 7–8 days. Later runs need no design work and no samples, only production and delivery.

How it works on the customer’s side

  1. At the food producer: the carton arrives flat, is folded without glue and filled with hay.
  2. In transport: the closed lid protects the contents like an ordinary carton.
  3. At home: the owner opens the box and the rabbit pulls the hay out through the ladder.
  4. Later: the lid can be opened again to add more hay.

What this project shows

The most interesting packaging has a second job. A carton can be a feeder, a display stand on the shelf, a dispenser or an organiser. If your product needs more than a box, we start with the question of what should happen to the package after it is opened, and then we check it on samples before the cutting die is made.

Have a product that needs packaging with a function?

Describe it through our producer page and send the dimensions and photos. We reply with a quotation within a few hours on working days. We match the order quantity to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quotation. We make the cartons in Poland and ship them across Europe.

Frequently asked questions

Can packaging work as something else after it is opened?

Yes. We design die-cut cartons with an extra function, for example a feeder, a display stand or a dispenser, and we test them on plotter samples before the cutting die is made.

Does a carton like this need glue or tape?

No. This feeder is folded from one die-cut sheet without glue or tape, and its lid opens from the top so that it can be refilled.

How long does a project like this take?

Here the first batch took about 30 days, counting the design, two sample runs and the cutting die. Repeat orders took 7–8 days. The time depends on the construction and on how many sample runs are needed.

Is there a minimum order quantity?

We match the order quantity to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quotation.