Oversized (XXL) Corrugated Boxes: How to Specify Very Large Cartons for Machines, Furniture and Bulky Goods

To specify an oversized (XXL) corrugated box, start from the item: its size including anything that sticks out, its weight and centre of gravity, how it is lifted and how it travels. The construction (a one-piece slotted box or a telescopic carton), the board (usually 5-layer or 7-layer) and the details such as handles, inserts and marks follow from that. We make XXL cartons up to 10 × 3 m to order. This guide explains each decision and ends with a checklist; figures are as of 13 November 2026.

What size can we make?

The size limit depends on the construction. These are the limits at our plant in Lubartów, Poland:

Construction Size we make Typical use
XXL carton Up to 10 × 3 m Machines and equipment, large household appliances, furniture, bulky industrial goods
Flap box (slotted box) Up to 1000 cm (10 m) long; the working width of our box-making machines is 300 cm Large items with a simple, box-like outline
Telescopic carton For items many metres long Long items, varying lengths, goods packed from above
Die-cut box Up to 260 × 150 cm Special outlines, locking parts, inserts cut with the blank
Tube-type carton (long and rectangular) Up to 240 cm inside length Profiles, rods, rolls: see tube-style and telescopic cartons for long items

Give us the size of the item, not of the box: we work out the inside and outside dimensions of the carton from it, with clearance for wrapping, inserts and protruding parts.

Choosing the construction

The FEFCO code, the international classification of corrugated box designs, sorts constructions into groups. For large goods three groups matter most:

Group How FEFCO describes it When it fits an XXL job
Slotted boxes, group 02 (for example 0201, or 0203 with fully overlapping flaps) Basically one piece with a glued, stitched or taped manufacturer’s joint and top and bottom flaps; shipped flat The item fits within the size limits of a flap box and can be packed through the top
Telescopic boxes, group 03 Usually more than one piece, for example a top and a bottom, that fit over each other Items longer than a flap box can be, varying lengths, or goods that should stay on their base while the cover is lowered over them
Slide boxes, group 05 Several pieces of liners and sleeves sliding into each other; the group also includes outside sleeves for other cases A sleeve slid over a tray or an inner pack, for example to add a second wall around part of the load

Where the parts of a telescopic carton overlap, the wall is doubled. A body with a separate lid and base lets the pack be lifted off the goods instead of the goods being pulled out, which helps with machines standing on a base or a pallet. Codes and drawings are in our catalogue of FEFCO codes. Slotted boxes can usually be made without a cutting die; die-cut constructions need one: see one-off costs for custom boxes.

Choosing the board

We choose the board with you by the weight of the goods, the transport and whether cartons will be stacked:

  • 3-layer board (E, B or C flute) for large but light items.
  • 5-layer board (EB, BE, BC or heavy AC) for heavier or stacked loads.
  • 7-layer AAC board for the heaviest and largest packs; special compositions are possible, with paper grades and flutes chosen for the strength required.

For the heaviest loads the manufacturer’s joint can be stitched with metal staples instead of glued. Board parameters such as ECT come from our board suppliers’ tests for each batch. We do not quote load capacities in kilograms: the result depends on the goods, the construction, the climate and handling, and is checked on a prototype. A large panel can bow, so long spans may need heavier board, inserts or supports. For heavy board in detail see heavy-duty cartons in AC and AAC board.

Details that matter on large cartons

  • Handles and openings. We cut standard hand holes or any other shape, as well as vent holes and perforations. The ASTM D6804 guide on hand hole design warns that pushing or pulling by hand holes can weaken the box sidewall and reduce compression resistance, so we plan hand holes together with the board and construction and check them on a prototype for heavy goods.
  • Inserts and fillers. Dividers, lattice dividers, inserts and fillers to your dimensions hold the goods away from the walls; fillers can also be made from board strips, honeycomb or rolled board on request.
  • Corners and pallets. Board corner protectors, layer pads and corrugated pallets can be added, depending on the goods.
  • Marks and print. Print orientation, centre of gravity and stacking marks where handlers see them on every side: see handling marks on cartons. We print flexographically and digitally, including UV.
  • Wooden parts. If the carton sits on a wooden skid or the shipment includes wooden crates, wood packaging material in international trade falls under ISPM 15: see ISPM 15 for wood packaging.

Transport: plan it before you fix the size

An XXL carton does not travel as a parcel: parcel networks limit length, girth and weight far below these sizes, so it goes by road freight, on a pallet or skid, or in a container. Road freight is often measured in loading metres, metres of the vehicle’s loading length, so a carton laid along the vehicle takes less floor length than one laid across it. Ask the forwarder for the loading width and height of the vehicle before you fix the outer size.

For sea freight, the door opening often limits the carton before the inside length does. Examples published by two ocean carriers:

Container Inside length Inside width Inside height Door opening (width × height)
20-foot standard 5.898–5.900 m 2.350–2.352 m 2.390–2.395 m 2.340 × 2.280–2.292 m
40-foot standard 12.032 m 2.350–2.352 m 2.390–2.395 m 2.340 × 2.280–2.292 m
40-foot high cube 12.032 m 2.350 m 2.695–2.700 m 2.340 × 2.585–2.597 m

Both carriers note that individual containers vary, so confirm the figures for your booking. A packed carton with two outside dimensions larger than the door opening will not go in through the doors in any position. Open-top containers are loaded from above through the roof, and your forwarder can propose other equipment for out-of-gauge loads.

Testing and the PPWR

A prototype of the full pack, filled with the real product or a substitute of the same weight, tells you more than any table. We can arrange package tests (compression, drop, transport simulation) in a partner laboratory; terms are agreed individually. ISTA publishes test procedures for freight, for example ISTA 3B for less-than-truckload (LTL) shipments, which covers palletised or skidded packages among others, and ISTA 3E for unitised loads shipped by full truckload. ISTA 3B also recommends documenting the paper grades of a corrugated box and retesting if they change.

Under Regulation (EU) 2025/40 (PPWR), the re-use targets for transport packaging that start on 1 January 2030 do not apply to cardboard boxes (Article 29(4)(d)), nor to packaging custom-designed for the transportation of large-scale machinery, equipment and commodities to fit the individual requirements of the operator that ordered it (Article 29(4)(b)). The Commission’s guidance of 10 June 2026 says that an operator relying on the second exemption must show in the technical documentation that the packaging is custom-designed for an individual product. The 50% empty-space limit for transport packaging (Article 24) applies from 1 January 2030 at the earliest, and its calculation method must take into account products of irregular shape. General information, not legal advice.

Checklist: what to settle before ordering

  1. The item. Length, width and height at the widest points, including protruding parts; weight; centre of gravity; sensitive surfaces and lifting points.
  2. Handling. Forklift, crane or by hand; pallet, skid or a base of its own; stacking in the warehouse or in transport, and how high.
  3. Route. Road freight, container or both; storage outdoors or in humid conditions; export outside the EU.
  4. Construction. One-piece slotted box or telescopic carton; how the goods go in and come out; whether the pack must be opened and closed again on site.
  5. Board and joint. 5-layer or 7-layer, glued or stitched; which parameters you need in the quote.
  6. Details. Hand holes, vent holes, perforations, inserts, corner protection, print and handling marks.
  7. Proof. A prototype and, if needed, a laboratory test: which procedure, and who judges the result.
  8. Delivery. How the flat cartons are bundled and delivered, and whether your site can unload long bundles.

What we can do

We design the construction with you, make samples and prototypes, and produce XXL cartons in 3-layer, 5-layer and 7-layer board, glued or stitched, with hand holes, inserts and print. The lead time is in the quote; most of our orders are delivered within 7 days (max. 16 working days). We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. Delivery within the EU is by arrangement; we already supply business customers in Lithuania, Germany, Slovakia, Czechia and the Netherlands.

Sources

FEFCO, International Fibreboard Case Code (12th edition); Hapag-Lloyd, container specifications; Ocean Network Express, dry containers; ISTA, test procedures; ASTM, D6804 guide on hand hole design; Regulation (EU) 2025/40 on EUR-Lex (Articles 24 and 29); Commission guidance document for the PPWR (10 June 2026). Figures as of 13 November 2026.

What to send us

Send the item’s dimensions and weight, a photo or drawing, how it is lifted and transported, the quantity and any print. We produce boxes to your dimensions and propose the board and construction in the quote. Send your enquiry through our home page.

Frequently asked questions

How large can a corrugated box be?

We make XXL cartons up to 10 × 3 m. Flap boxes can be up to 1000 cm (10 m) long, telescopic cartons can be made for items many metres long, and die-cut boxes go up to 260 × 150 cm.

Which board is used for very large cartons?

It depends on the weight of the goods, the transport and stacking: 3-layer board for large but light items, 5-layer board (EB, BE, BC or heavy AC) for heavier or stacked loads and 7-layer AAC for the heaviest. We do not quote load capacities in kilograms.

One-piece flap box or telescopic carton?

A one-piece slotted box (FEFCO group 02) is the simplest choice while the item fits its size limits. A telescopic carton (FEFCO group 03) has parts that fit over each other and suits longer items, varying lengths and goods that stay on their base while the cover is lowered over them.

Can XXL cartons be sent by parcel courier?

Usually not. An XXL carton is far beyond parcel limits on length, girth and weight, so it travels by road freight, on a pallet or skid, or in a container. Agree the transport before you fix the size.

Will a large carton fit into a shipping container?

Check the door opening, not only the inside length. In two ocean carriers’ examples, the door of a standard dry container is 2.340 m wide and 2.280 to 2.292 m high; a 40-foot high cube door is 2.585 to 2.597 m high. Containers vary, so confirm with your carrier.

Do the PPWR re-use targets apply to packaging for large machines?

Article 29(4) of Regulation (EU) 2025/40 exempts cardboard boxes and packaging custom-designed for the transportation of large-scale machinery, equipment and commodities from the re-use targets that start on 1 January 2030. General information, not legal advice.

How long does an XXL order take?

The lead time is stated in the quote. Most of our orders are delivered within 7 days (max. 16 working days); a new design, samples or waiting for a cutting die can take longer. Delivery within the EU is arranged individually.