ISPM 15 and Corrugated Packaging: What Exporters Should Know
Exporters often hear “ISPM 15” from a forwarder and wonder whether their corrugated boxes need a stamp. The short answer is no: ISPM 15 is about wood packaging, not cardboard. But it still matters for the pallet your boxes stand on, so it is worth knowing where the line falls.
What ISPM 15 is
ISPM 15 is an international standard from the International Plant Protection Convention (IPPC). Its aim is to reduce the risk of spreading pests with wood packaging material made from raw wood in international trade. Countries use it to decide which wood packaging may enter, without needing a phytosanitary certificate for every shipment.
What it covers
It covers wood packaging material such as pallets, crates and dunnage (the wood used to block and brace cargo). To comply, the wood must be treated, usually by heat treatment or fumigation, and carry a mark. The mark shows the IPPC symbol, the country code, a producer code and a treatment code such as HT for heat treatment.
What is outside its scope
- Paper and paper products, including cardboard and corrugated board.
- Processed wood products made with glue, heat or pressure, such as plywood and OSB.
- Very thin wood, 6 mm or less.
UK plant-health guidance states the same for cardboard and paper packaging: no ISPM 15 treatment or marking is required for them.
What in your shipment still needs a mark
Look at everything that is made of solid wood: the pallet under your boxes, any wooden crate, and any wooden blocking. If the destination requires ISPM 15, those items need the treatment and the mark, even when every box in the load is cardboard. For example, wood packaging moving between the EU and Great Britain has had to comply with ISPM 15 since 1 January 2021. Rules differ by country and can change, so confirm them for your destination.
A short checklist
- Corrugated boxes, inserts and dividers: nothing to mark.
- Wooden pallet: check that it is treated and that the mark is present and legible.
- Wooden crates and blocking: same check, or consider whether corrugated can do the job for lighter goods.
- Destination: confirm the rules with your forwarder before dispatch.
This is general information, not legal advice. For the pallet itself, see how many boxes fit on a pallet, and for heavier goods how to choose corrugated boxes in bulk.
What to send us
Send the destination country, the goods and their weight, and the box sizes you need. We produce boxes, inserts and dividers to your dimensions. Read the guide to buying cardboard boxes from Poland and our wholesale terms, and send your enquiry through our home page.
See also: Corrugated Packaging for Humidity, Cold, Corrosion and Sensitive Loads: What to Specify
See also: Corrugated Export Packaging: Choosing Cartons, Pallets and Pallet Boxes for Cross-Border Loads
See also: Corrugated Board vs Plastic, Wood and Solid Board: How to Choose a Transport Packaging Material
Frequently asked questions
Do corrugated boxes need an ISPM 15 stamp?
No. ISPM 15 applies to wood packaging material. Paper and cardboard, including corrugated board, are outside its scope, so the boxes themselves carry no mark.
Does the pallet under my cardboard boxes need ISPM 15?
If the pallet is wooden and the destination requires ISPM 15 for wood packaging, yes: the pallet needs the treatment and the mark, even if everything on it is cardboard.
Is ISPM 15 required on every route?
No. It concerns international trade, and what applies depends on the countries involved. Check the rules of the destination country with your forwarder or the plant-protection authority.
Can corrugated replace a wooden crate?
For some goods and weights, yes, but not for all. We produce boxes, inserts and dividers to your dimensions; tell us the goods and the weight and we advise whether corrugated is realistic.