Corrugated Export Packaging: Choosing Cartons, Pallets and Pallet Boxes for Cross-Border Loads
Corrugated export packaging means cartons, crates, cardboard pallets and pallet boxes that protect a load on its way to a receiver abroad. We ship from Poland across Europe and make packaging to size: from outer cartons to whole-pallet packs and large formats. This guide is for exporters, manufacturers and forwarders who have to specify packaging for cross-border loads. Board is lighter than wood, can be delivered flat and can be fitted to the product to the millimetre. The guide explains how to match the packaging to the load and what to put in an enquiry for an accurate quotation.
Board instead of wood: ISPM 15
Wooden crates and pallets need phytosanitary marking for export. Corrugated board is not wood in the sense of ISPM 15, see ISPM 15 and corrugated board for the detail. Even so, confirm the requirements of the destination country with the receiver or the forwarder before ordering.
Instead of a wooden pallet we can make cardboard pallets, and instead of a crate for a whole load: pallet boxes and octabins, see corrugated pallet packaging. We make palletising, pallets and pallet boxes ourselves.
Type of load, typical pack and data for a quotation
| Type of load | Typical pack | What to give for a quotation |
|---|---|---|
| Packaged goods, light and medium | Slotted outer carton, 3-layer or 5-layer board | Product dimensions, weight of the set, pieces per carton, palletising |
| Heavy items of small volume | 5-layer or 7-layer board or heavy-duty AC or AAC, reinforced base | Weight of one piece and of the whole pack, dimensions, layout in the pack |
| A whole pallet of goods in one pack | Pallet box or octabin | Dimensions and weight of the load, stacking height, how it is loaded |
| A palletised load without outer cartons | Cardboard pallet with layer pads | Dimensions and weight of the load, stack height |
| Long or large items | XXL packs, formats up to 10 x 3 m | Length, width, height, weight |
| A load sensitive to moisture or corrosion | Packaging with protection agreed in the enquiry | Route, type of transport, transit time, storage conditions |
Export packaging usually has several levels: a unit carton, an outer carton and a palletised load. Each is chosen separately, because different forces act on a carton in the middle of a stack and on one at the very bottom. In the enquiry describe the whole arrangement, not only a single box. Heavy board is covered in our article on AC and AAC board.
Humidity in sea transport and on long routes
Board is not waterproof and takes up moisture. In a container, on a ship or in a transhipment warehouse condensation can occur, so for longer routes say how the load will be carried and for how long. Solutions are in packaging for humidity, cold, corrosion and sensitive loads. Goods prone to corrosion can be covered with additional materials agreed in the enquiry.
Stacking, weight and volume
In export, packs are usually stacked and handled more times than in a domestic delivery. State the target stack height and the way of loading and we will choose the board and the construction. The parameters of board are explained in ECT, BCT and the McKee formula. The cost of carriage depends on weight and volume, so check dimensional weight too, see dimensional weight and choosing a carton. A carton that is too large raises the freight cost and one that is too tight will not protect the load. Cartons are delivered flat, which saves space in the store and in transport to you.
Typical mistakes when specifying export packaging
- No information on the route: packaging for a short road run and for sea carriage is chosen differently.
- The stacking height is left out, although it largely decides the choice of board and construction.
- The weight given is that of the product alone, without inner packaging and extras.
- Assuming that one pack will meet the requirements of every receiver: countries and carriers can set different conditions.
- A size chosen without regard to the pallet and the loading space, which raises the freight cost, see how many boxes fit on a pallet.
If you are unsure about a point, say so in the enquiry and we will clarify it with the quotation. It is better to ask before production than to correct packaging that is already on its way to the receiver.
Marking, labels, documents and recycling
- Marking and labels: the requirements depend on the receiver and the country. Give them in the enquiry and we will prepare print (flexo up to four colours or digital) or a field for a label.
- Documents: transport and customs documents are prepared by the sender or the forwarder; we do not replace them.
- Recycling: rules on packaging waste apply on the receiver’s side, so check them for the destination country.
- Delivery to you: we ship from Poland across Europe.
What to put in an enquiry for export packaging
- The destination country and the type of transport (road, sea, mixed).
- The dimensions and weight of the product and the number of pieces in the pack.
- The target stacking height.
- The receiver’s requirements for marking, labels and materials.
- Whether the load is sensitive to moisture or corrosion.
- The way of palletising and whether a cardboard pallet or a pallet box is needed.
How to order
Send the details through our home page. We reply with a quotation within a few hours on working days. Most orders leave our plant within 7 days; orders that need artwork approval, test prints, plotter samples, a new cutting die or a very complex construction take longer, up to 16 working days. We can make a prototype before the run. Read the guide to buying cartons from Poland and our wholesale terms.
See also: Corrugated Packaging for Business Buyers: 15 Answers to Procurement and Logistics Questions
See also: Handling Marks on Cartons (ISO 780): What the Symbols Mean and Where to Print Them
Frequently asked questions
Is corrugated packaging suitable for export instead of a wooden crate?
In many cases yes, especially for loads that cope well with 5-layer or 7-layer board or with heavy-duty AC or AAC board. For very heavy or unusual products we design the construction individually, from the weight and way of loading that you give in the enquiry.
Is corrugated board subject to ISPM 15?
Corrugated board is not wood in the sense of ISPM 15. Our article on the subject gives the detail, but you should confirm the requirements of the destination country with the receiver or the forwarder.
Do you ship packaging abroad?
Yes, we ship by freight or courier from Poland across Europe.
How do I protect board against humidity in sea transport?
State the route, the type of transport and the transit time and we will propose a solution from our moisture-resistant range. Board is not waterproof, so with a long journey the way of loading and ventilation also matter.
Can you help with the marking and labels the receiver requires?
We can print by flexo in up to four colours or digitally. The content of the markings and the requirements come from the receiver, so give them with the enquiry.
Can the packaging be delivered flat?
Yes, cartons are delivered flat, which reduces the space they take. The size and the way of folding are agreed with the quotation.