Corrugated Pallet Packaging: Octabins, Cardboard Pallets, Layer Pads and Corner Protectors

A lot of what holds a palletised load together is made of corrugated board, and not only the boxes. An octabin carries bulk goods in a single container, a cardboard pallet replaces a wooden one for lighter loads, layer pads keep bottles and jars from rubbing against each other, and corner protectors stop the strapping from cutting into the edges. This article explains the four products, how to choose the board for each, and what a supplier needs to know before quoting. Everything is made to size and in quantities matched to your needs, so the figures below are typical starting points, not limits.

The four products at a glance

Product What it does Typical loads Board, as a starting point
Octabin (pallet container) Carries bulk or loose goods in one container on a pallet Granules, metal and plastic parts, castings, semi-finished goods, agricultural produce 5- or 7-layer, including heavy AC and AAC
Cardboard pallet One-way pallet that replaces a wooden pallet Light and medium loads, air and export shipments Depends on the load; heavy AC or AAC for stronger versions
Layer pad (interleaving sheet) Flat sheet between layers, under the load and on top of the stack Bottles, jars, cans, cartons, sacks 3- or 5-layer
Corner protector L-shaped profile on the edges of the load, under strapping or stretch film Pallets of cartons, furniture, panels, glass, frames, doors 3- to 5-layer, or heavy board for strong strapping

Octabins: pallet containers made of corrugated board

An octabin is a tall box, octagonal or rectangular, that stands on a pallet and usually has a lid and a liner. It is also known as a gaylord. Industry, processors and producers use it to ship or store large quantities of one kind of goods without handling them piece by piece. The body, the base and the lid are designed together, so that the container, the pallet and the lid can come from one supplier.

Element Role Notes
Body The octagonal or rectangular wall of the container 5- or 7-layer board
Base Transfers the weight of the load to the pallet Reinforced and matched to the mass and kind of load
Lid Closes the container and allows stacking Matched to the body; stiffer if containers are stacked
Film liner Protects loose or sensitive goods On request

Most octabins use 5-layer or 7-layer board, including the heavy grades AC (5-layer) and AAC (7-layer) described in heavy-duty corrugated board. The load rating is set in the design from the load, so we do not quote a figure in kilograms in advance.

Matching the container to the load

Load What raises the demands Direction
Loose, fine goods Pressure on the walls, tightness of the base and corners 7-layer or heavy board, film liner
Metal parts and castings Sharp edges, point loads Heavy AC or AAC board, reinforced base
Agricultural produce Moisture and changing temperature Agree the moisture protection in advance
Stacked containers Vertical load on walls and lid Stronger board, rigid lid

These directions are a starting point. We confirm the final choice from the information about the load and, for heavy applications, propose a prototype first.

Octabin, big bag or wooden crate

Criterion Corrugated octabin Big bag Wooden crate
Material Corrugated board Plastic fabric Wood
Shape Rigid, stable on a pallet Soft Rigid
Empty return Folds flat Folds Takes up space
Recycling Paper Plastic Wood

We do not compare costs, because they depend on the size, the load and the run. A corrugated octabin works where low weight, stability on the pallet and no plastic or wood waste matter. It is not right for every load: very heavy or wet loads need suitable protection and a conversation before ordering. Corrugated board loses strength when it is damp, so for moist loads or changing temperatures agree on a film liner. If the containers are returned empty, agree beforehand who returns them and in what condition.

Cardboard pallets

A cardboard pallet is a one-way pallet made of corrugated board. It is light, designed for light and medium loads, and suits air and export shipments and anyone who does not want to handle wood waste. It does not replace a wooden pallet in every application, and it is not meant to return to circulation. For a one-way shipment this is an advantage: nobody has to organise returns, settle pallet exchange or store empty pallets, and the receiver simply sends the pallet to paper recycling.

Size Use Note
1,200 × 800 mm EUR pallet footprint, the most common format Typical size
1,200 × 1,000 mm Industrial pallets Typical size
800 × 600 mm Smaller pallets for smaller loads Typical size
Any size Unusual loads Made to fit the product, not the format

The construction depends on the load. For heavier goods we use heavy 5-layer AC or 7-layer AAC board; the other grades, from 3-layer E up to 5-layer, suit lighter versions. We do not state a capacity in advance. Once the load is known we give the parameters of the specific pallet, and for heavy loads we recommend a prototype.

Cardboard pallet or wooden pallet

Criterion Cardboard pallet Wooden pallet
Own weight Low Higher
Circulation One-way Reusable
After use Paper recycling Wood waste or return
Load Light and medium Also heavier

Corrugated board is outside the scope of ISPM 15, which applies to wood packaging, as explained in ISPM 15 and corrugated packaging. The requirements of the receiver or the destination country are still worth confirming before dispatch.

Using a cardboard pallet

  • Spread the weight evenly over the whole surface and do not let the load overhang the edge.
  • Wrap the load and the pallet in film, because moisture lowers the strength of the board.
  • Check whether the pallet is entered from two or four sides, and handle it accordingly with the forklift.
  • Whether pallets can be stacked depends on the construction and the load, so say so in the enquiry.
  • Test the pallet with the real load before the first large series, ideally on a prototype.

If the goods are heavy, or the pallet is meant to return to circulation, consider an octabin or a pallet box instead. Describe the load and we will tell you whether the pallet alone is enough or a container on the pallet is the better answer.

Layer pads and interleaving sheets

Layer pads are flat sheets or blanks of corrugated board placed between layers of goods on a pallet. A base pad separates the goods from the pallet, and a top sheet closes the stack from above. They are used by companies that palletise bottles, jars, cans, cartons and sacks: beverage and food plants, packaging producers, greenhouses and warehouses.

  • Layer pad: sits between successive layers of bottles, jars, cans or cartons.
  • Base pad: separates the goods from the pallet.
  • Top sheet: closes the stack and stabilises stacking.
  • Pad with cut-outs: openings for handles, sockets for bottle necks or places for protruding parts.

The most common formats follow the pallet: 1,200 × 800 mm and 1,200 × 1,000 mm. Any other size is possible, with cut-outs drawn to your design. 3-layer board is enough for lighter layers; for heavy layers choose 5-layer, which sags less under bottles or jars. The colour is grey kraft or white.

Goods on the pallet What to watch Direction
Glass bottles and jars Heavy layer, tall bases or necks that need sockets 5-layer board, with cut-outs if needed
Cans Smooth tops, close fit to the outline of the layer 3- or 5-layer, depending on the weight of the layer
Outer cartons Stability of the stack, an even base Base pad and top sheet
Sacks Soft load that needs a level surface Pad matched to the outline of the pallet

A layer pad should follow the outline of the layer as closely as possible. If it is clearly smaller, the edges of the packages have no support; if it overhangs the pallet, it is easily damaged in handling. Stabilising the stack, protecting labels and decoration from rubbing and allowing higher stacking are the main benefits. The cautions are moisture, which lowers the strength of the board, and a board that is too thin, which sags under a heavy layer, so always give the weight of one layer. The top sheet is visible to the warehouse and the receiver, so it often carries the brand or a handling mark, printed by flexography in up to four colours or digitally.

Corner protectors

Corner protectors are L-shaped profiles made of laminated and glued corrugated board. They are placed on the edges of the load under strapping or stretch film, so the strap does not cut into the corners and the edges are not crushed in transport and stacking. Pallets of cartons, furniture, panels, frames, doors, glass and household appliances all use them, as do long items shipped loose or in bundles.

Board For which load Note
3-layer (E, B, C) Lighter loads, little strap pressure, surface protection The lightest variant
5-layer (EB, BE, BC) Medium loads, stronger PET strapping or stretch film For pallets of cartons and appliances
Heavy AC (5-layer, 8.5 to 8.9 mm) and AAC (7-layer, 12.6 to 13.5 mm) Heavy loads sensitive to crushing, strong strapping See heavy-duty corrugated board

How to choose corner protectors

  • Length: at least the height of the load, and long enough to cover every place where a strap passes.
  • Arms: the tighter the strapping, the wider the arm that spreads the pressure over the edge of the goods.
  • Board: 3-layer for a light load; consider 5-layer or heavy board for stiff, heavy goods under strong strapping.
  • Strapping: stretch film loads the profile differently from PET strap, so say which you use.
  • Conditions: moisture lowers the strength of the board, so agree on protection for damp transport.

Place the corner on the edge of the load before strapping, with the strap running over the outside of the arms, so that all the pressure goes into the board and not into the edge of the goods. When you wrap in stretch film, the following layers of film hold the corner in place. If several straps are used, each should pass through the protector. A corner protector guards the edges from the outside and takes the pressure of the strap; it does not separate the goods inside the pack, which is the job of layer pads, dividers and inserts. The two are often used together. Corner protectors can also be printed, for example with the brand or a mark showing which side faces out.

Building a complete pallet system

Load Typical combination
Glass jars and bottles from a filling line Base pad, layer pads (with cut-outs if needed), top sheet, corner protectors, stretch film
Cartons of household appliances Corner protectors under PET strapping, top sheet
Loose metal or plastic parts Octabin with a film liner, on a cardboard or wooden pallet
Light goods for air freight Cardboard pallet, corner protectors, film

For the carton-to-pallet fit, read how many boxes fit on a pallet, and for how heavy goods behave in a stack, ECT, BCT and the McKee formula. If freight is billed by volume, check dimensional weight.

What to tell your supplier

  • The mass of the load, how it is distributed and the kind of goods: loose or solid, fine or large, with sharp edges or not.
  • The size of the pallet or of the load, and the number of layers in the stack.
  • How the pallet is handled: forklift entry from two or four sides, stacking, strapping type.
  • Conditions: humidity, cold, storage time, export or air freight and any requirement of the receiver.
  • Whether you need cut-outs, printing and what the unit should look like when empty.

How to order

Send the details through our home page. We reply with a quotation within a few hours on working days. Most orders leave our plant within 7 days; orders that need artwork approval, test prints, plotter samples, a new cutting die or a very complex construction take longer, up to 16 working days. We ship from Poland across Europe, and we can make a prototype before a series. Read the guide to buying cardboard boxes from Poland and our wholesale terms, and for flutes and board grades how to choose corrugated boxes in bulk.

See also: Corrugated POS Displays and Trade-Show Stands: Types, Construction, Print and Planning

See also: Corrugated Packaging for Automotive Parts: Cartons, Inserts, Dividers and Pallet Boxes Made to Size

See also: Corrugated Cartons for Beer, Drinks and Bottles: Dividers, Multipacks and Gift Boxes

See also: Returnable and Reusable Shipping Cartons under the PPWR: What Is Required, When Reuse Makes Sense and How QR Tracking Works

Frequently asked questions

What is an octabin?

An octabin, also called a gaylord, is a tall corrugated box, octagonal or rectangular, that stands on a pallet and usually comes with a lid and a liner. It carries bulk or loose goods such as granules, metal and plastic parts, castings and semi-finished products.

How much weight can a cardboard pallet carry?

It depends on the construction and the board, so we do not quote one figure. Once we know the load, the way it is distributed and how the pallet is handled, we give the parameters of that specific pallet. For heavy loads we recommend a prototype before a series.

Does a cardboard pallet need an ISPM 15 mark?

No. ISPM 15 applies to wood packaging, and corrugated board is outside its scope. The requirements of the receiver or the destination country are still worth confirming before dispatch.

What size are layer pads for a EUR pallet?

The most common format is 1,200 × 800 mm, the footprint of a EUR pallet, followed by 1,200 × 1,000 mm. We make any size, also with cut-outs for handles or bottle necks.

How long should a corner protector be?

At least as long as the height of the load, and long enough to cover every place where a strap passes. If it is shorter, the exposed part of the edge still takes the pressure of the strap.

Can I order a prototype first?

Yes. Prototypes are possible before a series and are recommended for heavy loads and unusual constructions.