Corrugated Packaging for Automotive Parts: Cartons, Inserts, Dividers and Pallet Boxes Made to Size
Corrugated packaging for the automotive sector means unit and outer cartons, inserts, dividers and pallet packaging that protect car parts from the production line to the distributor’s warehouse. We make them to size for manufacturers and suppliers of parts who need packaging fitted to a specific product, not an off-the-shelf carton. Car parts vary widely, from light gaskets to heavy suspension elements and long assemblies, so every enquiry starts with the product: its dimensions, weight, sensitive spots and the way it is stacked on a pallet. We prepare a quotation within a few hours on working days and most orders leave our plant within 7 days (max. 16 working days).
What the packaging is made of and how
For lighter parts we use 3-layer board, for heavier ones 5-layer and 7-layer, and for the greatest loads heavy AC and AAC board, described in our article on AC and AAC board. Flutes E, B, C, BC, EB and BE are available, in kraft or white.
- Unit cartons for single parts, including cartons printed with markings.
- Outer cartons for sets and series of parts.
- Inserts cut to size that fix the position of a part.
- Dividers, layer pads and grids that split the space into compartments.
- Pallet boxes and octabins for larger batches, see corrugated pallet packaging.
- Long packs, telescopic long boxes and XXL formats up to 10 x 3 m for parts of unusual size.
Type of part, main risk and solution
| Type of part | Main risk | Typical solution | What to give for a quotation |
|---|---|---|---|
| Filters, gaskets, small fittings | Crushing, loss inside the outer carton | Unit or outer carton with dividers | Dimensions and number of pieces per carton |
| Brake and suspension parts | High weight, parts knocking together | 5-layer or 7-layer board, cut insert, layer pads | Weight of a piece, layout in the carton |
| Painted or polished parts | Scratches and abrasion of surfaces | Insert or divider so parts do not touch | Which surfaces are sensitive |
| Long, stiff parts | Bending, damage to the ends | Tubes, elongated cartons, XXL formats | Length, diameter or section |
| Heavier assemblies on a pallet | Shifting, crushing of layers | Pallet box, octabin, pads between layers | Weight of the assembly, number of layers, how it is handled |
Who we prepare this packaging for
- Manufacturers of car parts who pack series products.
- Suppliers of components for assembly plants and workshops.
- Distributors and wholesalers of parts who need outer and shipping cartons.
- Remanufacturers, for whom returns and repacking matter.
- Online parts shops that ship by courier; see also e-commerce packaging and dimensional weight.
Surface protection, corrosion and weight
Protecting paint and surfaces is in practice a question of whether the parts touch each other. An insert cut to size or a board divider keeps parts in separate compartments, and layer pads separate the layers. Loose filling seldom gives such a repeatable result, so we recommend an insert wherever appearance matters.
Moisture and corrosion depend on the product and the route. Board absorbs moisture, so for parts exposed to rust it is worth agreeing an additional solution, for example film or another protection inside the carton; see packaging for humidity, cold, corrosion and sensitive loads.
When matching board to the weight of parts, look not only at the weight of one piece but also at the number of pieces in the carton and how it is carried. A carton that is too weak deforms under stacking, and too much weight in one pack makes work hard for warehouse staff. If the weight is high, consider several smaller cartons or a pallet box. Place cartons on the pallet so that their edges do not overhang its footprint. Board parameters are explained in ECT, BCT and the McKee formula.
Print, markings and buyer requirements
We can print cartons by flexo in up to four colours or digitally: logo, catalogue number, pictograms, technical data and fields for labels. State the buyer’s requirements for markings, codes, labels, specifications and quality documentation in the enquiry. We will choose a solution to meet them, but we do not declare industry certifications. Returns and reusable packaging can also be included in the design if you give the assumptions.
What to put in an enquiry
- Photos of the part, its dimensions and weight.
- The number of pieces in a carton and how the cartons are stacked.
- Sensitive surfaces and edges.
- Storage and transport conditions, including moisture.
- The buyer’s requirements for markings and labels.
How to order
Send the details through our home page, with photos of the parts, dimensions, weight and marking requirements. We reply with a quotation within a few hours on working days and most orders leave our plant within 7 days; orders that need artwork approval, test prints, plotter samples, a new cutting die or a very complex construction take longer, up to 16 working days. We ship from Poland across Europe and can make a prototype before the run; for export see corrugated export packaging. Read the guide to buying cartons from Poland and our wholesale terms.
See also: Packaging for Bearings and Machine Parts: Corrugated Cartons, Inserts and What to Specify
Frequently asked questions
Do you make packaging for heavy car parts?
Yes. For heavier parts we use 5-layer and 7-layer board and, for the greatest loads, heavy AC or AAC. For larger batches we also make pallet boxes and octabins. Give the weight of one piece and the number of pieces in the pack and we will choose the construction.
Can I order inserts and dividers for parts?
Yes, we make inserts, dividers, layer pads and grids to size, in any dimensions. They divide the carton into compartments and protect surfaces from rubbing. Give the dimensions of the parts or send a sample or a drawing.
Do you hold automotive-industry certificates?
We do not declare industry certifications. State the buyer’s requirements, such as markings, codes, labels, specifications and quality documentation, in the enquiry. We will discuss what can be included in the packaging and in the documents that travel with the delivery.
How do I protect parts from corrosion in a carton?
Board alone does not protect against moisture, so for parts prone to rust agree an additional protection, for example film inside the pack. We will propose a solution once we agree the storage and transport conditions with you.
Can the packaging be printed with numbers and markings?
Yes. We print by flexo in up to four colours or digitally. A carton can carry a logo, a catalogue number, pictograms and fields for labels according to the buyer’s requirements. For variable digital markings we will discuss how they are applied in the enquiry.
Do you make a prototype before the run?
Yes, a prototype can be prepared before the run starts. You check that the part sits well in its compartment and how the carton behaves on a pallet, and we make the corrections.