Packaging for Bearings and Machine Parts: Corrugated Cartons, Inserts and What to Specify

Packaging for bearings and machine parts has three jobs: keep each part in its manufacturer’s closed pack until mounting, stop it moving or being knocked in transit, and keep the shipment dry, clean and easy to identify. Corrugated board does this with printed unit boxes, shipping cartons with inserts and dividers, and pallet boxes for heavy parts. The board itself is not a corrosion barrier: rust protection comes from the preservative and, where used, VCI materials chosen with the bearing supplier. Status 13 November 2026.

Why bearings need more than an ordinary box

Rolling bearings are finished precision parts. Damage that is hard to see on delivery can shorten their life after mounting, which is why bearing makers publish rules for storage and handling. These are the risks the packaging has to address:

  • Impacts. NSK lists impacts during mounting or transport as a cause of dents in the raceways, and NMB advises never to use a bearing that has been dropped, because a dented (brinelled) bearing runs noisily.
  • Vibration without rotation. A bearing that vibrates or oscillates without turning can suffer false brinelling, a fretting wear that leaves marks spaced like the rolling elements. A feature in the STLE journal of June 2023 names transport and storage as typical situations. This mainly concerns bearings already mounted in machines and assemblies.
  • Moisture and condensation. When a packed bearing is moved to a cooler place, the humidity inside the pack rises and water can condense (SKF). NSK also warns against quick temperature changes that cause condensation.
  • Dirt. Particles that get into a bearing leave dents in the raceways (NSK). SKF and NMB therefore advise keeping bearings in their closed packs until they are mounted.

What bearing makers publish about storage

The figures below are each manufacturer’s own guidance for its products, not a general standard and not our data. Check the current documents of the maker of your bearings; we accessed these on 13 November 2026.

Source Packaging Climate Other points
NSK Europe, Technical Insight TI/E/0018 Closed, original packaging. Individually packed bearings: guaranteed shelf life of one year (up to 5 years in optimum conditions). Bulk packaging: at least 3 months (up to 18 months) Frost-free, ideally above 5 °C; max. about 40 °C, average 15–30 °C; relative humidity max. 75% (peak), average max. 65% within 24 h No quick temperature changes that cause condensation, no direct sunlight, no aggressive media such as acids, salts or exhaust fumes
SKF Pulp & Paper Practices, April 2013 Do not open the pack until the bearing is mounted Relative humidity below 60%, a peak of 65% accepted; unprotected bearing steel starts to corrode at 50% and corrodes quickly above 75%; temperature fluctuation of max. 3 °C per 48 hours Store bearings flat and free from vibration; a pack moved from 30 °C and 50% relative humidity to 20 °C can reach 100% inside, and water can condense
NMB, care and handling of miniature ball bearings Leave bearings in their packs until just before use Avoid direct sunlight and air-conditioner outlets; in cold climates let bearings warm to room temperature before unpacking Never use a bearing that has been dropped

Note that NSK guarantees a shorter shelf life for bearings in bulk packaging than for individually packed ones: before repacking bearings into kits or bulk cartons, ask the bearing supplier how that affects the shelf life it states. A carton cannot control the climate; it keeps the closed packs together, lying the right way, and away from rain and dirt.

Typical products and how they are packed

Product Typical packaging What to specify
Small and medium ball and roller bearings in their own packs Shipping carton with dividers or a lattice, so that the unit packs cannot move Dimensions of the unit pack, quantity per carton, weight
Unit boxes for spare parts and distribution Printed unit box of 3-ply board (E or B flute) with the part number and a barcode Inner dimensions, print data, whether the box goes on shelves or to a packing line
Large bearings and slewing rings Flat-lying pack with a die-cut insert or layer pads, heavy 5-ply AC or 7-ply AAC board, a cardboard pallet or base for a forklift Outer and inner diameter, height, weight, how it is lifted
Bearing units and housings Carton with a cut insert that holds the housing and keeps the mounting faces off the walls Shape, protruding parts such as grease nipples, weight
Shafts, spindles and other long machined parts Long rectangular box or telescopic box with supports along the length Length, cross-section, weight, support points
Gears, sleeves and small machined parts in quantity Multi-compartment carton or pallet box with dividers and layer pads Pieces per layer, number of layers, total weight

For castings, forgings and other heavy steel parts see corrugated packaging for castings and metal parts.

Choosing the board

We make 3-ply board with E, B and C flutes, 5-ply EB, BE and BC and heavy AC, and 7-ply AAC, and we can compose special grades. As a general guide, unit boxes are made from 3-ply grades, shipping cartons holding many bearings from 5-ply, and packs for large or heavy parts from AC or AAC; see heavy-duty AC and AAC board. The final choice depends on the weight, how the parts press on the walls, the stacking height and the route. We do not state a load capacity in kilograms without a test of your pack. A concentrated load, such as a heavy ring resting on a small area, is better handled by inserts and layer pads that spread the weight than by thicker walls alone.

Inserts, dividers and lying flat

  • A fixed place. A die-cut insert or a lattice gives each bearing or part its own place, so parts do not knock against each other or the walls.
  • Flat storage. SKF advises storing bearings flat. Design the carton so that large bearings lie flat and the top of the pack is obvious, and add the This way up symbol where orientation matters.
  • Layer pads. Between layers of heavy parts, layer pads spread the load and separate the parts.
  • Cushioning. Corrugated inserts, honeycomb fillers or foam inserts (the last two in cooperation with partners) are chosen for the weight and the route; compare them in a drop test rather than by eye.
  • Mounted bearings. For assemblies with built-in bearings, the STLE feature recommends bearing locks during shipping to stop small oscillations. Such locking is part of the product design; the carton and inserts should keep the assembly from moving.

Corrosion and moisture: what a carton can and cannot do

Corrugated board is not waterproof, absorbs moisture and does not stop corrosion. Rust protection comes from the preservative applied by the bearing maker and, where used, from VCI materials (volatile corrosion inhibitors): papers, films or emitters that release an inhibitor which acts on metal surfaces inside a closed pack. Which preservative and which VCI product suit a given metal and storage time is decided with the bearing supplier or a corrosion specialist; for the wider picture read packaging for humidity, cold and corrosion. What the packaging can add:

  • a film bag or liner made by a partner and supplied with the carton, which keeps the unit packs together and away from dirt;
  • room in the insert for the corrosion protection material you use, so that it stays where it was placed;
  • a stronger board grade where the route or storage is humid, because damp board loses compression strength;
  • the Keep away from rain symbol and a clear note to keep the pack closed until mounting.

Plan the route as well as the pack. NSK and SKF both warn about condensation after temperature changes, for example when cold goods are brought into a warm hall and opened at once. Letting the bearings reach room temperature before unpacking is one of NMB’s recommendations.

Marking and identification

Bearings of similar size look alike, and SKF notes that packs are often opened in the store just to check the designation, which exposes the bearing to dirt. Clear marking lets the warehouse check the content without opening the pack. We print flexo or digitally, including UV, and digital printing can add variable data to each box: part number, batch, quantity, a barcode or a QR code linked to your system. Colours can be matched to Pantone. Handling symbols such as Fragile, This way up and Keep away from rain follow ISO 780; where and how to place them is explained in handling marks on cartons. A symbol does not protect the part: it only tells handlers what the shipper expects.

Export shipments

Bearings and machine parts often travel outside the EU. Corrugated board is outside the scope of ISPM 15, but a wooden pallet under the cartons may need treatment and the mark; see ISPM 15 and corrugated packaging. For long routes, container transport and storage at the destination, read corrugated export packaging. Before the first shipment, check whether your customer has its own packaging specification or label requirements.

Checklist for buyers

  1. Parts list. Part numbers, dimensions, weight per piece and per pack, and whether bearings arrive in their own unit packs.
  2. Maker’s rules. The bearing maker’s storage and handling guidance and any rules on repacking or bulk packing.
  3. Orientation. Must the parts lie flat? Which side is up? Are there faces that must not touch the board?
  4. Corrosion plan. Preservative, VCI material if any, bag or liner, and who supplies each.
  5. Route and climate. Road, sea or air, storage time, unheated warehouses, temperature changes on the way.
  6. Handling. By hand or by forklift, stacking height, packs per pallet, how the receiver unpacks.
  7. Marking. Print data, variable data, barcode or QR code, handling symbols, your customer’s label requirements.
  8. Proof. Prototype, drop or compression test, a trial on your packing line, and who approves the result.

What we can do

We make unit boxes, shipping cartons, inserts, dividers, lattices and layer pads in any size, long rectangular and telescopic boxes for shafts and other long parts, and pallet boxes and cardboard pallets in our own plant. Board parameters (ECT, BCT) come from our suppliers’ tests for each batch. Foam inserts and honeycomb fillers are made in cooperation with partners, and a partner can make a film bag or liner that we supply with the packaging. We can arrange package tests (compression, drop, transport simulation, stacking) in a partner laboratory and try cartons on your packing line; terms are agreed individually. Customers can visit and audit our plant, also using VDA methods; this is a customer audit, not a certificate. We sign an NDA on request. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. Most orders are delivered within 7 days (max. 16 working days). Delivery within the EU is by agreement, and we supply customers in Lithuania, Germany, Slovakia, Czechia and the Netherlands.

Sources

NSK Europe, Technical Insight: Bearing Storage (TI/E/0018); SKF Pulp & Paper Practices, April 2013; NMB: care and handling of miniature ball bearings; NSK: damage and countermeasures; STLE, Tribology & Lubrication Technology, June 2023: false brinelling. All accessed on 13 November 2026. This is general information; always follow the documentation of the maker of your bearings.

What to send us

Send the list of parts with dimensions and weights, photos or drawings, quantities per pack, the route and the bearing maker’s packaging requirements. We produce boxes to your dimensions and answer in writing in your language. Send your enquiry through our home page.

Frequently asked questions

Can bearings be shipped in ordinary corrugated cartons?

Yes, as long as each bearing stays in its manufacturer’s closed pack and cannot move in the carton. Dividers, lattices or die-cut inserts keep the packs in place. The carton protects against knocks, dirt and rain on the way, but not against corrosion: that comes from the preservative and, where used, VCI materials.

Does corrugated board protect bearings against corrosion?

No. Board absorbs moisture and is not a corrosion barrier. Rust protection comes from the bearing maker’s preservative and, where used, VCI materials chosen with your bearing supplier. The packaging can add a film bag or liner made by a partner and room in the insert for the protection material.

Should bearings be stored lying flat?

SKF recommends storing bearings flat and free from vibration. We can design cartons and inserts so that large bearings lie flat and the top of the pack is clearly marked. Always follow the guidance of the maker of your bearings.

What humidity do bearing makers recommend for storage?

The figures differ by manufacturer. SKF recommends relative humidity below 60%, with a peak of 65% accepted; NSK gives a peak of max. 75% and an average of max. 65% within 24 h for optimum storage. Both warn against quick temperature changes that cause condensation.

Can a dropped bearing still be used?

NMB advises never to use a bearing that has been dropped, because the impact can dent the raceways. Ask the maker of your bearings for its rule. Packaging cannot rule out drops, but a firm insert, hand holes and a pack weight suited to manual handling make carrying easier.

Which board do you use for heavy bearings and machine parts?

For heavier parts we use 5-ply board and heavy AC, or 7-ply AAC, with inserts and layer pads that spread the load. We do not state a capacity in kilograms without a test; we can make a prototype and arrange tests in a partner laboratory.

Can you print part numbers and barcodes on each box?

Yes. We print flexo or digitally, including UV, and digital printing can add variable data such as a part number, batch, barcode or QR code to every box.