Corrugated Packaging for Humidity, Cold, Corrosion and Sensitive Loads: What to Specify
Packaging made of corrugated board for humid or demanding conditions starts with one honest statement: plain corrugated board is not waterproof. It absorbs moisture and then loses strength. Even so, it can pack loads that go to a cold room, onto a ship or that are sensitive to corrosion and static, provided the solution is matched to the actual conditions. This guide is for food, industrial and export buyers who have to specify packaging for such loads. It explains why moisture is the main problem and what is usually added to the board.
We do not promise in advance a particular coating, standard or resistance time. We choose the solution on enquiry: give the temperature, humidity, storage or transport time and the type of load, and we propose a construction and additions.
Why moisture is the main problem
Corrugated board is made of papers glued into layers with a flute. When humidity rises, the paper fibres take up water, the wall softens and the pack deforms more easily, especially in a stack. Compression strength falls, so a stack that stands steadily in a dry warehouse can deform in a damp one. The link between board parameters and stacking strength is explained in ECT, BCT and the McKee formula, and the effect of humidity on crates in crates and trays for fruit and vegetables.
So the first question is how long and in what conditions the pack has to work. A few hours in a cool van is a different situation from several weeks in a sea container.
Problem, solution and what to give for a quotation
The table collects typical situations. They are directions for the conversation, not promises: the actual solution is fixed after we receive the enquiry.
| Problem | Typical solution | What to give for a quotation |
|---|---|---|
| Cold room and frozen goods: condensation, temperature swings | A larger strength reserve (5-layer board), a film liner or bag, a moisture cover | Temperature, humidity, storage time, how it is stacked |
| Fish and seafood: a wet load, ice | A film liner or bag, stronger board, coated or impregnated board (to be agreed) | Kind of load, presence of ice or water, time, weight |
| Metals and machine parts: risk of corrosion | VCI materials in inserts and films, a moisture cover | Kind of metal, storage or transport time, dimensions and weight of the parts |
| Electronics: electrostatic charges | ESD materials in inserts and films, forming inserts | Kind of components, receiver requirements, how it is marked |
| Sea transport: long time, changing humidity | Heavy-duty AC or AAC board, film, palletising | Route, time, how it is loaded, receiver requirements |
| Damp warehouse | A larger strength reserve, lower stacks, a film cover | Humidity, stack height, storage time |
What is chosen for the application
- A larger strength reserve: 5-layer or 7-layer board, and for heavy loads heavy-duty AC or AAC board, see our article on AC and AAC board.
- A film liner or bag that separates the load from the wall of the pack.
- A moisture cover on the pack or the pallet, for example film.
- Board with a coating or impregnation if the use requires it; the kind of coating is agreed on enquiry.
- VCI materials to protect metals against corrosion.
- ESD materials to protect electronics.
- Inserts, layer pads and fillers from board in any size.
We do not state standards, resistance times or the names of particular coatings in advance. If the receiver requires a particular parameter, put it in the enquiry.
Cold room, food and wet products
Every board we use has a declaration of conformity for direct food contact, but the declaration does not make the board resistant to water or grease. For frozen goods, fish and seafood agree a liner or a bag with us instead of counting on the board alone. The basics of EU food-contact rules are in our article on pizza, takeaway and bakery boxes. This is general information, not legal advice.
Sea transport and export
In sea transport the pack is exposed to a long journey and changing conditions. For heavier loads consider heavy-duty board and protect the load with film. The rules of ISPM 15 as they apply to corrugated board are in ISPM 15 and corrugated board. Always confirm the requirements of the receiver in the destination country before shipping.
Machine parts, metals and electronics
For industrial loads we often work with inserts and layer pads that position the part in the pack and separate it from the walls. An insert of VCI or ESD material is not chosen by eye: it depends on the kind of metal or component, the time and the requirements of the receiver.
Palletising and covering the whole load
Often it is not the box alone but the way it is laid out and covered that decides how well the load resists. We make pallets, cardboard pallets and pallet boxes ourselves, so we can propose the whole: the pack, inserts, layer pads and a cover for the pallet, see corrugated pallet packaging and how many boxes fit on a pallet. Also look after storage: the stack should stand on a pallet, not on a wet floor, and the load is worth covering from above.
A prototype before the run
When conditions are demanding, do not order a large batch at once. We can make a prototype that you check in your own conditions: in the cold room, on the packing line or in a trial shipment.
How to order packaging for hard conditions
Send the details through our home page, with the temperature, humidity, time and the load. We reply with a quotation within a few hours on working days. Most orders leave our plant within 7 days; orders that need artwork approval, test prints, plotter samples, a new cutting die or a very complex construction take longer, up to 16 working days. We ship from Poland across Europe and make packaging in quantities matched to your needs. Read the guide to buying cartons from Poland and our wholesale terms.
See also: Corrugated Export Packaging: Choosing Cartons, Pallets and Pallet Boxes for Cross-Border Loads
See also: Paper-Based Insulated Shipping Boxes as an Alternative to EPS: What to Check Before Switching
See also: How to Store Corrugated Boxes: Humidity, Temperature, Stacking and Stock Rotation
Frequently asked questions
Do you have waxed or waterproof board?
Plain corrugated board is not waterproof. Solutions with a coating or impregnation are considered on enquiry, but we do not promise a particular coating or a resistance time in advance. Describe the conditions (temperature, humidity, time, load) and we will propose a solution.
Do you make packaging with VCI materials against corrosion?
Protection of metals against corrosion is provided by VCI materials in inserts and films. We choose the solution to the kind of metal, the storage time and the requirements of the receiver. State the requirements in the enquiry.
Can you make antistatic ESD packaging?
Protection of electronics is provided by ESD materials in inserts and films. The scope and type of material depend on the components and the requirements of the receiver, so state them in the enquiry. We will answer what we can offer.
Is a carton suitable for a cold room?
It can be, but the solution depends on the conditions. Moisture and condensation lower the strength of board, so in a cold room a larger strength reserve, a film liner or a cover is used. State the temperature, humidity and storage time.
Will a corrugated pack survive sea transport?
It depends on the load, the time, the route and the protection. We do not promise a resistance time in advance. We choose the board, including heavy-duty AC or AAC, the covers and the palletising, and for a demanding load we propose a prototype for a trial.
How fast will I get a quotation and the packaging?
Quotation within a few hours on working days, dispatch from our plant usually within 7 days (max. 16 working days). Choosing a solution can take longer if the conditions are unusual, so describe them in your first enquiry.