Corrugated Packaging for Meat and Dairy Processors: Outer Cartons, Trays and Inserts for the Cold Chain
Packaging for butchers, sausage makers and dairies is mostly outer cartons, trays and inserts made of corrugated board, in which cured meats, cheeses and dairy goods in unit packs go through the cold room, handling and transport to customers. We make them to size, in any run, from board that has a declaration of conformity for direct food contact. This guide is for meat and dairy plants, regional producers, cold-chain wholesalers and online food shops that want to specify cartons properly. It covers the board and construction, print, what happens to board in a cold room and what to put in an enquiry. For a general overview of food packaging read corrugated packaging for food businesses.
Board and construction for meat and dairy cartons
We work with 3-layer, 5-layer and 7-layer board in kraft or white. Lighter outer cartons usually come from 3-layer board (flutes E, B, C), and where the cold-room stack is tall or the load is heavy we use 5-layer (EB, BE, BC). The most common construction is the slotted carton FEFCO 0201, see the FEFCO catalogue; for the difference between slotted and die-cut styles read our article on die-cut and slotted cartons.
| Pack | Board and construction | Used for |
|---|---|---|
| Slotted outer carton | 3-layer or 5-layer, FEFCO 0201, size fitted to the pallet | Cured meats, cheeses and dairy goods in unit packs |
| Cardboard tray | 3-layer, flute E or B, die-cut to size | Portions, multipacks and shop display |
| Insert, layer pad, divider | Any size and cell layout | Separating layers and protecting unit packs |
| Insulated shipping carton | To be agreed (ask about a variant) | Shipping products that must stay cool |
| Cold-room carton | 5-layer or stronger, with a strength reserve | Storage and stacking at low temperature |
The dimensions of outer cartons are fitted to the unit packs so that there is no slack that lets goods slide in transport. Trays are made on the principles from the catalogue of constructions and our die-cut range.
Who we prepare the packaging for
- Butchers and sausage makers who pack unit packs into outer cartons.
- Dairies and cheese makers shipping cheese, yoghurt, butter and other dairy goods on pallets.
- Small regional plants that sell by mail order and need a carton with inserts.
- Wholesalers and cold-chain distribution centres that standardise cartons for their shelves and racks.
- Contract producers who want one carton size for several products.
- Online shops selling regional food by courier.
Print and finish
On an outer carton we print what helps the warehouse: product name, brand, storage marks and a space for a label or a date. We use flexo in up to four colours or digital print and, where the carton also sells, lamination and varnish. Cartons that show the product can have a film window.
It is worth leaving a free field on the side for the logistics label and barcode, so that the print does not collide with the sticker with the production date. Marks for stacking direction and orientation make work easier at the cold-room dock, where people work fast and in gloves.
Cold room, condensation and moisture: what to watch
Corrugated board absorbs moisture and is not waterproof. In a cold room, and above all when goods move from low temperature into a warm room, condensate settles on the carton and its compression strength falls. We do not promise water resistance, but we choose a solution to match the conditions; more is in packaging for humidity, cold, corrosion and sensitive loads.
| Problem | Typical solution | What to give for a quotation |
|---|---|---|
| Condensation after leaving the cold room | A larger strength reserve, a shorter time on the ramp | Temperature, transition time, conditions on the ramp |
| Wet or greasy products | Film liner or paper inside the carton | Type of unit pack, possible leakage |
| Tall stacking | 5-layer instead of 3-layer board, size fitted to the pallet | Carton weight, stack height, storage time |
| Shipping that must stay cool | Insulated carton (ask) | Delivery time, season, type of product |
Strength of board is described by ECT and BCT. As a guide, nominal ECT is 4 to 6.5 for 3-layer C flute and 5.5 to 9 for 5-layer BC, and how to read the figures is explained in ECT, BCT and the McKee formula. For a cold room allow a reserve above the value calculated for dry conditions.
Practical selection tips
- Standardise. The fewer carton sizes, the simpler the orders, the store and the pallet pattern. One carton for several products is often better than a separate one for each.
- Fit the pallet. The carton should stay within the pallet footprint, without overhang; see how many boxes fit on a pallet.
- Handling. Every transfer risks crushing; cut-out handles in the walls and reinforced corners make gripping easier and cut damage.
- Film liners. If a product needs an extra barrier, a bag or film liner supplied by the plant or agreed with us goes into the carton.
- Pallets. We make cardboard pallets and layer pads ourselves, see corrugated pallet packaging.
Hygiene and food-contact notes
Our board has a declaration of conformity for direct food contact. For goods in unit packs the carton usually serves as outer packaging, so the requirements of your plant and of your customers (for example sanitary rules) should be stated in the enquiry and we will select a solution. We do not claim any certification beyond that.
What to put in an enquiry
- The dimensions of the unit pack and the number of pieces in the carton.
- Storage conditions: temperature and time.
- The way of palletising and the stack height.
- The print you need and any film window.
- Sanitary requirements of your plant and customers.
How to order
Send the details through our home page. We reply with a quotation within a few hours on working days and most orders leave our plant within 7 days; orders that need artwork approval, test prints, plotter samples, a new cutting die or a very complex construction take longer, up to 16 working days. We ship from Poland across Europe and can make a prototype before the run. Read the guide to buying cartons from Poland and our wholesale terms.
See also: Paper-Based Insulated Shipping Boxes as an Alternative to EPS: What to Check Before Switching
Frequently asked questions
Is the board in your cartons suitable for contact with food?
Every board we use has a declaration of conformity for direct food contact. For goods in unit packs, however, the carton works as outer packaging, so give the requirements of your plant and your customers in the enquiry.
Will a corrugated carton survive a cold room?
Corrugated board absorbs moisture and is not waterproof, so for a cold room we choose it with a strength reserve and, if needed, add a film liner. Give the temperature, storage time and stack height and we will propose a construction.
Do you make insulated cartons for shipping chilled products?
Insulated solutions are discussed individually, so ask about a variant. For a quotation we need the delivery time, the season, the type of product and the dimensions of the unit pack.
Can I order cartons with product data printed on them?
Yes. We print by flexo in up to four colours or digitally, in quantities matched to your needs. The mandatory content of the packaging is set by the producer, and we reproduce the artwork you supply.
Will you make a carton for a specific pallet and unit pack?
Yes, we match the dimensions to the unit pack and to the pallet footprint. The carton, tray and insert can first be made as a prototype.
How quickly will I get a quotation and the goods?
We prepare a quotation within a few hours of the enquiry on working days and most orders leave our plant within 7 days (max. 16 working days). We ship from Poland across Europe.