Paper-Based Insulated Shipping Boxes as an Alternative to EPS: What to Check Before Switching

Paper-based insulated boxes can replace expanded polystyrene (EPS) boxes in some chilled shipments, but there is no general answer. How long the contents stay within range depends on the construction, the coolant, the product, the pack-out, the route and the season, so a time printed in a datasheet does not transfer to your shipment. Before switching, test the paper-based design side by side with your current EPS box, with your product and coolant, in summer and winter conditions, using temperature loggers. We state no holding time and no thermal values. Status 13 November 2026.

What a paper-based insulated box is

An outer corrugated box with an insulating liner or walls made of paper-based materials instead of a moulded EPS box. It works together with coolants such as gel packs or, for frozen goods, dry ice. Typical constructions:

Construction How it is built What to check
Paper filling in a paper casing Shredded or pulped paper enclosed in paper pads placed inside the outer box Whether the casing has a barrier layer and how the recipient separates the parts
Multi-layer panels Several layers of paper or corrugated board folded into a liner Fit at the corners and the lid, assembly time
Multi-wall corrugated board Walls of several corrugated layers with air in and between the flutes Wall thickness and outside dimensions compared with your EPS box
Paper honeycomb panels Honeycomb panels combined with corrugated board Behaviour under condensation, stacking after the test

Do not assume that a paper wall of the same thickness performs like your EPS wall. Compare the outside dimensions and the weight of every design you test, because both drive the shipping cost (see dimensional weight).

Why companies switch, and what EU rules say

  • Disposal. A box made only of paper and board can go in the paper collection container; EPS is a plastic and is collected separately under local rules.
  • Storage. Corrugated boxes and many paper liners arrive flat and are assembled at packing; moulded EPS boxes arrive formed.
  • EPS restrictions. Regulation (EU) 2025/40 (PPWR) amends Part B of the Annex to Directive (EU) 2019/904: from 12 February 2029 it lists EPS food containers for food intended for immediate consumption and polystyrene chips used to protect goods in transport (Articles 67(5) and 71), which Member States must prohibit (Article 5 of the Directive). Moulded EPS insulated shipping boxes are not named; check national rules for your products.
  • Empty space. From 1 January 2030, or 3 years after the implementing acts on the method, whichever is later, the empty space ratio in transport and e-commerce packaging may be at most 50% (Article 24(1)). Filling materials such as paper cuttings, air cushions or polystyrene chips count as empty space (Article 24(3)). Insulating liners are not named; the method, due by 12 February 2028, is to take into account packaging that needs space to protect the product (Article 24(2)). See the PPWR checklist for packaging buyers.

For food contact, Regulation (EC) No 1935/2004 and Regulation (EC) No 2023/2006 on good manufacturing practice apply to every component that touches the food; for PFAS limits see PFAS in food-contact packaging. Status 13 November 2026; general information, not legal advice.

EPS and paper-based boxes: what to compare

Aspect What to compare
Temperature Only a comparative test with the same payload, coolant and profile; no datasheet figure
Size and weight Outside dimensions, weight of the pack-out, dimensional weight, pallet fill
Moisture Paper and corrugated board take up moisture and lose compression strength; check condensation from coolants and whether a barrier or absorbent pad is needed (see wax-free moisture-resistant boxes)
Packing Storage space, assembly steps and time, training of packers
Documents Composition of each part, food-contact declarations, test reports

How to test before you switch

  1. Write down the requirement. The temperature range for your product (set by you, your quality team or the rules of your sector), the longest door-to-door time including weekends and failed deliveries, and your margin. The supplier does not set these values.
  2. Choose ambient profiles. Test a summer and a winter profile. ISTA 7E gives heat and cold profiles for parcel delivery, based on measurements in real transport; ISTA 7D is a development test of temperature exposure; ASTM D3103-20 is a method for the thermal insulation performance of distribution packages; ISTA Standard 20 covers design and qualification of insulated shipping containers. For medicinal products, the EU GDP guidelines (2013/C 343/01, section 9.4) ask for qualified thermal packaging and seasonal configurations of insulated boxes.
  3. Keep the pack-out identical. The same product or a simulant of the same mass, the same number and type of coolants, conditioned the same way and in the same positions. Write the pack-out down, including seasonal configurations; the GDP guidelines say cool-packs must not touch the product directly.
  4. Measure correctly. Use calibrated loggers (EN 12830 covers temperature recorders) in the product, at the top and at the bottom, and record the ambient temperature.
  5. Chamber first, then real routes. A chamber shows whether the design can work under the profile; shipments on your routes, in both seasons, show practice. Run several replicates, not a single box.
  6. Check the box afterwards. Is the board damp, has the box lost its shape, can it still be stacked? Add a transport simulation such as ISTA 3A or drop and compression tests.
  7. Decide on your own figures. Time within range against your requirement, dimensions, weight, assembly time and cost per shipment. Keep the report as evidence.

Dry ice: what is different

Dry ice (carbon dioxide, solid) is UN 1845, a Class 9 dangerous good; for air transport it falls under packing instruction 954. It turns into gas, so the package must let the gas escape: do not seal the box or the liner airtight, for example in a closed film bag. The package must show UN 1845 and the net weight of dry ice, and for air transport the Class 9 label. Carriers set their own limits and acceptance rules, so check them before the first shipment, and include the dry ice in your test from the start.

Checklist: what to ask your supplier

  1. What is each component made of (box, liner, casing, barrier, adhesive), and which parts contain film or plastic?
  2. Which parts can go in the paper collection container and which must be separated? For coated parts, is there a paper producer’s declaration, with its source?
  3. Which food-contact declarations cover the components that can touch the food or the coolant?
  4. Is there a test report, and under which method, profile, payload, coolant and pack-out? A report for another product is a starting point, not proof for yours.
  5. Can we get prototypes for our own chamber test and route trials in both seasons?
  6. How does the construction behave with condensation, and is it suitable for dry ice?
  7. What are the flat and assembled dimensions, the weight and the number of assembly steps?

What we can do

We can make or source paper-based insulated constructions for chilled shipments, made to order, with outer boxes of 3-layer E, B or C, 5-layer EB, BE, BC or heavy AC, or 7-layer AAC board. We have board with a declaration of conformity for direct food contact; On request we can arrange thermal tests of the construction; terms are agreed individually. other components (insulating liner, insert, adhesive) need their own documents, so ask for them. documents for other components are selected for each construction. We make prototypes for your thermal test and can arrange package tests (compression, drop, transport simulation) in a partner laboratory; terms are agreed individually. We state no holding time, thermal values or price in advance. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. For fillers and inserts see void fill and product protection compared.

Sources

Regulation (EU) 2025/40 on EUR-Lex (Articles 24, 67 and 71); Directive (EU) 2019/904 (Article 5, Annex Part B); Regulation (EC) No 1935/2004; Regulation (EC) No 2023/2006; EU GDP guidelines 2013/C 343/01; ISTA thermal standards and test procedures; ASTM D3103-20. Standards are sold by their publishers; check current editions and your carrier’s dry ice rules before you decide.

What to send us

Tell us the product, its weight and dimensions, the temperature range, the longest delivery time, the season, the coolant (gel packs or dry ice) and the dimensions of your current EPS box. We produce boxes to your dimensions. Send your enquiry through our home page.

Frequently asked questions

Can a paper-based insulated box replace an EPS box?

For some chilled shipments, yes, but only your own test can show it. Test the paper-based design side by side with your current EPS box, with the same product, coolant and temperature profile, and switch only if it meets your requirement.

How long does a paper-based insulated box keep products cold?

We do not state a time. A holding time is valid only for the payload, coolant, pack-out and ambient profile in which it was measured. Ask for the test report behind any figure and repeat the test with your own product and route.

Which test methods are used for insulated shipping boxes?

Common references are ISTA 7D (temperature test for transport packaging), ISTA 7E (heat and cold profiles for parcel delivery), ISTA Standard 20 (design and qualification of insulated shipping containers) and ASTM D3103-20 (thermal insulation performance of distribution packages). EN 12830 covers temperature recorders, not the box.

Is EPS packaging banned in the EU?

Not in general. From 12 February 2029, EPS food containers for immediate consumption and polystyrene chips used to protect goods in transport are on the list of products that Member States must prohibit under Directive (EU) 2019/904, as amended by Regulation (EU) 2025/40. Moulded EPS insulated shipping boxes are not named. Status 13 November 2026; general information, not legal advice.

Can paper-based insulated boxes be used with dry ice?

Dry ice is UN 1845, a Class 9 dangerous good, and the package must let the carbon dioxide gas escape, so it must not be sealed airtight. Mark it at least with UN 1845 and the net weight of dry ice, and check your carrier’s rules before the first shipment.

Can the recipient put the box in the paper collection?

A construction made only of paper and board can go in the paper collection container. Film or plastic parts, such as a barrier bag, and the coolant must be separated. For coated parts, ask for the paper producer’s declaration and its source.

Does the insulation count as empty space under the PPWR?

The Regulation does not say so for insulating liners. Article 24(3) counts filling materials such as paper cuttings or polystyrene chips as empty space; the calculation method is due in an implementing act by 12 February 2028. Check it before you fix box sizes for 2030.

Can you supply paper-based insulated boxes?

Yes, made to order: we can make or source paper-based insulated constructions with corrugated outer boxes, and prototypes for your own test. On request we can arrange thermal tests of the construction; terms are agreed individually. We state no holding time or thermal values. Send us the product, temperature range, longest delivery time, season and coolant.