Corrugated Crates and Trays for Fruit and Vegetables: Humidity, Cold Chain and Stacking
Fruit and vegetable growers, packers and wholesalers use corrugated board for trays, crates and cartons because it is light, can be printed, is delivered flat and is recycled with paper. The weak point is moisture: produce releases water, cold rooms are damp and board loses strength as it absorbs it. This guide is for growers, packing houses, wholesalers and retail chains who need to specify corrugated crates and trays, and it covers formats, board choice, the effect of humidity, cold-room advice, how to count crates for a season and when to order.
We make everything to size and in quantities matched to your needs, so the dimensions in this article are typical values, not limits.
Tray, crate or carton: which format for which produce
| Format | Typical produce | Notes |
|---|---|---|
| Open tray, low sides | Soft fruit, berries, stone fruit, tomatoes in one or two layers | Shelf-ready, light, easy to print; low stack weight |
| Crate with hand holes | Apples, pears, potatoes, root vegetables, cabbages | Heavier filled weight; board and stack height matter most |
| Carton with lid | Produce shipped to retail or export in closed units | Closed, printable, needs ventilation holes for cooling |
| Pallet box (octabin) | Bulk produce moved in large units | See corrugated pallet packaging |
The same constructions are produced as die-cut or folded designs, glued or self-locking. A new shape needs a cutting die and a prototype is worth making before a season run: see our article on die-cut corrugated boxes.
Why humidity is the main issue
- Laboratory strength is measured in a standard atmosphere. Board is conditioned at 23 °C and 50% relative humidity according to ISO 187 before testing, so catalogue figures describe board in that atmosphere, not in a cold room.
- Moisture lowers stacking strength. Board absorbs water from the air and from the produce, becomes softer and carries less load.
- Time matters. Under a constant load, board slowly deforms, and this creep is faster in humid air. A crate that holds a stack for a day may fail after weeks of storage.
- Changing humidity is worse than steady humidity. Cycling between cold room and a warm loading dock, or condensation on cold crates, is harder on board than a constant damp atmosphere.
We do not give percentages for strength loss because they depend on board, humidity, load and time. The practical consequence is to choose a stronger board and a lower stack than a dry-warehouse calculation would suggest. For the calculation itself see ECT, BCT and the McKee formula.
Board choice for produce crates and trays
| Board | Typical thickness | ECT | Typical use |
|---|---|---|---|
| 3-layer E | about 1.5 mm | about 3 to 5.5 kN/m | Small, light trays and sleeves |
| 3-layer B | about 2 to 3 mm | about 3 to 6 kN/m | Light trays, single-layer packs |
| 3-layer C | about 3.5 to 4 mm | about 4 to 6.5 kN/m | Trays and smaller crates |
| 5-layer EB | about 3.5 to 4 mm | about 7 to 9 kN/m | Stiff, printable trays |
| 5-layer BC | about 5.5 to 6.5 mm | about 5.5 to 9 kN/m (heavy grades up to about 15) | Crates stacked on pallets, cold rooms |
| Strong 5-layer BC | about 6.7 to 6.8 mm | about 15.2 to 17.2 kN/m | Heavy produce, tall stacks, long storage |
Values are nominal, taken from board datasheets, with a tolerance of about 5%. For heavier crates and pallet boxes see our article on heavy-duty AC and AAC board.
Cold-room and stacking advice
- Use five-layer board for crates that stand in cold rooms or are stacked high, and keep the stronger grades for heavy produce.
- Balance ventilation holes: produce needs cooling air, but every hole lowers stacking strength. Tell us the airflow you need and we will place the holes accordingly.
- Stack lower: a lower stack puts less load on the bottom crate, which is the cheapest strength gain.
- Keep columns aligned: crates stacked directly on top of each other carry more than crates that overhang the layer below.
- Keep pallets off the floor and away from damp surfaces, and avoid pallets that let crate bases sag between boards.
- Add dividers or corner protection where heavy layers meet, and avoid packing produce that is still warm and wet.
Counting crates for a season: an example
Illustrative figures only. A grower expects to pack 30 tonnes of produce in crates holding 12 kg each.
| Step | Calculation | Result |
|---|---|---|
| Crates for the harvest | 30,000 kg / 12 kg | 2,500 crates |
| Reserve for losses and rework (+10%) | 2,500 x 1.10 | 2,750 crates |
| Crates per pallet | 4 per layer x 8 layers (600 x 400 mm) | 32 crates |
| Pallets of empty crates | 2,750 / 32 | about 86 pallets |
A 400 x 300 mm crate typically gives 8 per layer instead of 4. Real counts depend on the crate height and the pallet height allowed by your transport. Send us your dimensions and we will calculate both the crates and the pallets: see also how many boxes fit on a pallet.
Trays and retail display
Trays are the shelf-ready format: low sides, fully printed, stacked on pallets and moved straight to the shop floor. We print by flexo in up to four colours, and digital printing is possible for more complex artwork or shorter runs. Send the logo as a vector file. Because board is not waterproof, produce that sweats or meets ice should be discussed in the enquiry.
Food contact
Every board we use has a declaration of conformity for direct food contact. The basics of EU food-contact rules, what applies to paper and board and what to ask your supplier are in our article on pizza, takeaway and bakery boxes, and the same principles apply to produce packaging. This is general information, not legal advice.
Planning schedule: a rule of thumb
| When | What to do |
|---|---|
| About 8 weeks before the first harvest | Forecast volumes and choose formats and board |
| About 6 weeks before | Confirm dimensions and artwork, order a prototype |
| About 4 to 5 weeks before | Place the order: most orders leave our plant within 7 days (max. 16 working days) and delivery comes on top |
| About 2 weeks before | Delivery to site and a test pack |
Use it as a starting point and shift it to your own season.
What to send for a quote
- Produce, filled weight per crate and the number of units.
- Internal or external dimensions, and the pallet size you use.
- Storage: dry store, cold room, with ice, transit time and stack height.
- Ventilation and hand holes needed, lid or open top.
- Print: number of colours, logo as a vector file.
- Destination country, planned quantity and deadline.
How to order
Send the details through our home page. We reply with a quotation within a few hours on working days. Most orders leave our plant within 7 days; orders that need artwork approval, test prints, plotter samples, a new cutting die or a very complex construction take longer, up to 16 working days. We ship from Poland across Europe. Read the guide to buying cartons from Poland, our bulk offer and our wholesale terms.
See also: Damaged Cartons in Transit: How to Read the Cause and Prevent It
Frequently asked questions
Which board is best for fruit and vegetable crates?
It depends on weight, stack height and storage. Light trays work in 3-layer board, while crates that are stacked high or kept in cold rooms are usually made in 5-layer board, and heavy produce in the strongest 5-layer grades. Tell us the filled weight, stack height and storage conditions and we will propose a board.
Does humidity weaken corrugated crates?
Yes. Board absorbs moisture from the air and loses stacking strength as it does, and the effect is worse over long storage and when humidity changes. This is why cold-room crates are made in a stronger board than the same crate used dry.
Are ventilation holes a problem for strength?
Holes let air through, which helps cooling, but they remove board and lower stacking strength. The size and position can be balanced, so state in the enquiry how much ventilation the produce needs.
Are the crates waterproof?
No. Corrugated board is not waterproof and we do not promise it. If crates will meet ice or free water, say so in the enquiry rather than assuming.
How many crates fit on a pallet?
It depends on the crate size and height. As an illustration, a 600 x 400 mm crate usually gives 4 per layer, so 8 layers is 32 crates per pallet. Send us your crate and pallet dimensions and we will count it exactly.
When should I order for the harvest season?
Plan well ahead: most orders leave our plant within 7 days (max. 16 working days) and delivery comes on top. As a rule of thumb, forecast volumes about 8 weeks before the first harvest and place the order 4 to 5 weeks before.