Packaging for the Chemical Industry: Corrugated Cartons for Non-Dangerous Goods and Limited or Excepted Quantities (LQ/EQ)

Corrugated cartons for the chemical industry carry bottles, canisters, cans, pails and cartridges of paints, adhesives, cleaning products, lubricants and other chemicals. For products that are not dangerous goods in transport, and for dangerous goods in limited quantities (LQ) or excepted quantities (EQ) under ADR, the outer carton needs no UN approval, but it must be strong enough and, for EQ, pass documented package tests. The full ADR regime needs UN-certified packaging. We do not hold a UN certificate and do not mark our boxes with the UN mark. As of 13 November 2026; general information, not legal advice.

First question: is your product dangerous goods in transport?

Classifying the goods is the consignor’s duty (ADR 1.4.2.1.1). Start with section 14 of the safety data sheet (Annex II to the REACH Regulation): UN number, proper shipping name, transport hazard class and packing group. If the product is not regulated for transport, ADR packaging rules do not apply and the carton is chosen like any carton for liquids or heavy goods. If it has a UN number, Table A of ADR decides the rest: column 7a gives the limited quantity per inner packaging, column 7b the excepted quantity code and column 8 the packing instruction. Companies that consign, pack, load or carry dangerous goods by road must, as a rule, appoint a dangerous goods safety adviser (ADR 1.8.3), and the adviser, not the box maker, decides which regime applies.

Which packaging each regime needs

Regime When it applies Outer packaging Tests and marks
Not dangerous goods in transport No UN number for transport in the safety data sheet Any carton suited to the weight, the containers and the route No ADR test; a transport test of your own is advisable
Limited quantities (ADR Chapter 3.4) Column 7a shows a quantity above 0 and each inner packaging stays within it Inner packagings in a strong outer packaging; no UN approval; up to 30 kg gross per package, 20 kg for shrink- or stretch-wrapped trays No type test by road; LQ mark: a diamond of at least 100 × 100 mm (50 × 50 mm on small packages)
Excepted quantities (ADR Chapter 3.5) Column 7b shows a code from E1 to E5 Inner packaging, intermediate packaging with cushioning (and absorbent material for liquids), strong rigid outer packaging such as fibreboard Documented tests: drops from 1.8 m and a 24-hour stacking load equal to 3 m of identical packages; EQ mark of at least 100 × 100 mm
Full ADR regime Above the LQ or EQ limits, or where they are not permitted A tested and approved design type, for example a 4G fibreboard box (ADR 4.1.1.3.1) Type tests and approval by a competent authority; UN mark and hazard labels

Excepted quantities are small: code E1 allows up to 30 g or 30 ml per inner packaging and 1000 g or 1000 ml per outer packaging (ADR 3.5.1.2). Many parcel carriers accept fewer dangerous goods than ADR allows, so read their terms before you order packaging. Sea (IMDG Code) and air transport (ICAO Technical Instructions, IATA DGR) have their own versions of these rules.

What the UN mark means, and why we do not use it

A UN mark certifies that a packaging conforms to a design type that passed the tests of ADR Chapter 6.1 and was approved by a competent authority; ADR 6.1.3.1 reserves the UN symbol for that purpose. A fibreboard box is type 4G (ADR 6.1.4.12): the water absorption of its outer surface in a 30-minute Cobb test must not exceed 155 g/m², and the maximum net mass is 400 kg. In ADR’s own example, 4G/Y145/S/02 NL/VL823, 4G is a fibreboard box, Y means packing groups II and III, 145 is the maximum gross mass in kg, S stands for solids or inner packagings, 02 is the year of manufacture, NL the state authorising the mark and VL823 the manufacturer. The approval covers one design type, and any change to the design, material or manufacturing method requires new tests (ADR 6.1.5.1.4).

We do not hold a UN certificate, so we do not mark our boxes with the UN mark and do not offer them as UN packaging. A plain carton made to the dimensions of a UN box is not a UN box. If your goods need UN packaging, give us the UN number and quantity and we will tell you what we can and cannot supply.

Typical products, risks and carton solutions

Product and container Main transport risks Typical carton solution
Bottles of cleaning products and other liquids Rubbing, tipping, pressure on caps Carton with dividers, so that no two bottles touch
Canisters of oils, fluids and technical chemicals High weight, manual handling 5-layer carton with handles or hand holes
Cans of paint and varnish Dented rims, upper layers pressing on lids Carton with an insert or layer pads
Pails of adhesives and paints Stacking pressure on the lids Carton or tray for pails, sized to the pallet
Tubes and cartridges of sealants Many small items, crushing Carton with a grid that holds each piece
Granules and powders in bulk Weight of a whole pallet, moisture Octabin or pallet box, with a liner where needed

Corrugated board absorbs moisture and is not waterproof, so the carton does not replace a tight container and closure. Leaks are contained by the container and, where your adviser asks for it, by absorbent material or a liner. We can supply a film bag or liner with the carton, made by a partner, and board with a water barrier, a film coating or varnish; see wax-free moisture-resistant cartons. Waxed cartons are available on request, with details in the quote.

Board, dividers and stacking

  • 3-layer board (flutes E, B or C) for lighter products in small containers.
  • 5-layer board (EB, BE or BC) for heavier canisters, cans and pails.
  • Heavy 5-layer AC and 7-layer AAC for the heaviest loads and high stacks.
  • Dividers, grids and layer pads keep plastic containers apart and spread the load over the lids.
  • Footprint matched to the pallet, so cartons do not overhang; see corrugated pallet packaging.

We take board parameters (ECT, BCT) from our suppliers’ tests for each batch, and we can arrange package tests (compression, drop, transport simulation) in a partner laboratory on terms agreed individually. Such a test is not UN type testing. Whether a test report can document the EQ tests is for your adviser to decide. We state no load in kg without a test.

Labels and marks on the carton

We print flexographically or digitally in UV, also with varnish, from your artwork; you decide what the carton must show. Under Article 33 of the CLP Regulation (EC) No 1272/2008, where the outer packaging carries transport labelling for the same hazard, the CLP pictogram need not appear on it; where it carries no transport labelling, outer and inner packaging are both labelled, unless the inner label is clearly visible. LQ and EQ marks can be printed or applied as labels, and their use is the consignor’s responsibility. Handling symbols help handlers but do not protect the goods; see handling marks under ISO 780. We do not print the UN mark or UN packaging codes.

Export and other rules

For long routes and sea freight, plan for humidity and stacking (see corrugated export packaging); wooden pallets may need ISPM 15 treatment (see ISPM 15 and corrugated packaging). Under the PPWR, Regulation (EU) 2025/40, packaging for dangerous goods and cardboard boxes are exempt from the 2030 re-use targets for transport packaging (Article 29(4)). ADR 2025 applies as of 13 November 2026; amendments are due to enter into force on 1 January 2027 (UN depositary notification C.N.252.2026).

Checklist: what to settle before you order

  1. Classification and regime. Section 14 of the safety data sheet for every product, and the regime (not dangerous goods, LQ, EQ or full ADR) confirmed by your adviser.
  2. Containers. Type, dimensions, filled weight and closure of each container, ideally with samples.
  3. Gross mass. For LQ, no more than 30 kg per package or 20 kg per wrapped tray.
  4. Carrier. The carrier’s own rules for dangerous goods and parcel weights.
  5. Marks. Who supplies the artwork for CLP pictograms, LQ or EQ marks and handling marks.
  6. Load and tests. Pallet, stacking height, warehouse humidity, and who documents the EQ or transport tests.

What we can do

We make cartons to size for the chemical industry: with dividers, grids, inserts and layer pads, with handles or hand holes, trays for pails, octabins and pallet boxes, and we palletise. We can make a prototype before the run to check the fit to your containers. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. Most orders are delivered within 7 days (max. 16 working days). Delivery within the EU is by arrangement; we supply customers in Lithuania, Germany, Slovakia, Czechia and the Netherlands. We do not supply UN-certified packaging.

Sources

ADR 2025, official Portuguese text published by the competent authority IMT: Part 1, Part 4 and Part 6; HSE guidance on limited and excepted quantities; UN notification C.N.252.2026; CLP Regulation, Regulation (EU) 2020/878 and PPWR on EUR-Lex. Check the current texts before you ship.

What to send us

Tell us the products and containers, their filled weight and dimensions, the number per carton, the regime confirmed by your adviser, the pallet and stacking, and the marks to be printed. Send your enquiry through our home page.

Frequently asked questions

Does a carton for chemical products need a UN certificate?

Not always. Products that are not dangerous goods in transport need no UN packaging, and under ADR the outer packaging for limited or excepted quantities needs no UN approval either. UN-certified packaging is required under the full ADR regime (ADR 4.1.1.3.1). Your dangerous goods safety adviser decides which case applies.

Do you make UN-certified boxes?

No. We do not hold a UN certificate, so we do not mark our boxes with the UN mark and do not offer them as UN packaging. If your goods need UN packaging, give us the UN number and quantity and we will tell you what we can and cannot supply.

Can I ship limited quantities in a plain corrugated carton?

Yes, if the goods qualify under ADR Chapter 3.4: inner packagings within the quantity in column 7a of Table A, a strong outer packaging, up to 30 kg gross per package (20 kg for wrapped trays) and the LQ mark. Many parcel carriers accept fewer dangerous goods than ADR allows, so check their terms first.

What tests apply to a package of excepted quantities?

Under ADR 3.5.3 the complete package must withstand drops from 1.8 m in set orientations and a 24-hour stacking load equal to identical packages stacked to 3 m, without breakage or leakage of any inner packaging. The tests must be documented. This is not a UN type approval.

Is a carton made to the dimensions of a UN box also a UN box?

No. A UN approval covers one tested design type: board, construction, dimensions, closure and inner packagings. Any change to the design, material or manufacturing method requires new tests (ADR 6.1.5.1.4).

Will corrugated board hold a leaking liquid?

No. Corrugated board absorbs moisture and is not waterproof, so it does not replace a tight container. We can supply a liner made by a partner, and board with a water barrier, a film coating or varnish. Waxed cartons are available on request.

Will you print hazard pictograms and LQ or EQ marks?

Yes, from your artwork, flexographically or digitally in UV. You decide what the carton must show and where. We do not print the UN mark or UN packaging codes.

Which board suits heavy canisters and pails?

Usually 5-layer board (EB, BE or BC), and heavy 5-layer AC or 7-layer AAC for the heaviest loads and high stacks. We state no load in kg in advance; package tests can be arranged in a partner laboratory.