Cardboard vs Corrugated Board: How Corrugated Board Is Made, and What Flutes, Liners and Grammage Mean

Cardboard is an everyday word for any heavy paper-based material; corrugated board is a specific construction of it. Corrugated board consists of a waved paper, the fluting, glued with starch between flat papers, the liners. One flute between two liners gives 3-ply (single wall) board, two flutes give 5-ply (double wall) and three flutes 7-ply (triple wall). The flute letter (E, B, C, A) sets the thickness, the papers set most of the strength, and grammage (g/m²) is the mass of the whole board.

Cardboard, paperboard and corrugated board: the terms

In everyday English, cardboard can mean a cereal carton, a shipping box or a sheet of grey board. The packaging industry avoids the word because it does not describe a specific product, and standards speak of corrugated fibreboard (for example ISO 3034, which covers the thickness of corrugated board).

Term What it is Typical uses
Paper A thin sheet of fibres; above roughly 200 to 250 g/m² it is usually called board, but the exact threshold differs between definitions Wrapping, printing, the papers that corrugated board is made from
Cartonboard (solid board, paperboard) A solid, unfluted board, often multi-ply, made from primary and/or recovered fibres Folding cartons and set-up boxes
Corrugated board Fluting glued between liners: a light, stiff sandwich Shipping boxes, trays, crates, pallet boxes, inserts, displays

We make boxes and other products from corrugated board only; we do not make solid board. Where a premium surface is needed on corrugated board, we use printing, lamination, varnish or foil coating instead.

How corrugated board is made

Corrugated board is made on a corrugator, a line of machines that combines three, five or seven webs of paper into single, double or triple wall board in one continuous process. The first patents for corrugated paper date from 1856 (pleated paper as a lining for hats) and 1871 (corrugated paper for wrapping fragile items such as bottles). The main steps today:

  1. Reel stands and splicers feed the paper rolls and change them without stopping the line.
  2. Preheating and moistening. The papers are heated and conditioned with steam so that they can be formed.
  3. Single facer. The fluting passes between heated corrugating rolls with a toothed profile and takes the shape of a wave. Starch adhesive is applied to the flute tips and the first liner is pressed on. The result is single face web: one liner and one flute.
  4. Bridge. The single face web runs in loops over a bridge, which lets the two halves of the line run at different speeds, for example during roll or order changes.
  5. Glue unit and double backer. Starch is applied to the other flute tips and the second liner is bonded on. For double and triple wall board, two or three single face webs are combined with the outer liner.
  6. Scoring, slitting and cutting. The continuous web is creased, cut to length and width and stacked as sheets.

Converting turns the sheets into packaging: printing (most often flexographic, increasingly digital), die-cutting, folding and gluing, taping or stitching. We make boxes from corrugated board, and the board data we quote come from our board suppliers’ tests for each batch. For print options see printing on corrugated boxes.

Plies and walls: from single face to 7-ply

Ply counts the paper layers; wall counts the fluted layers. Both names are in use, and they describe the same boards.

Name Layers Flutes Grades we use
Single face (2-ply) 1 liner + 1 fluting 1, exposed on one side Supplied as rolls and sheets for wrapping and protecting products
Single wall (3-ply) 2 liners + 1 fluting 1 E, B, C
Double wall (5-ply) 3 liners + 2 flutings 2 EB, BE, BC and the heavy AC
Triple wall (7-ply) 4 liners + 3 flutings 3 AAC, also in special compositions

The choice between 3-, 5- and 7-ply follows the load, the stacking and the transport. For the heaviest grades, AC and AAC, see heavy-duty double-wall AC and triple-wall AAC board.

Flutes: E, B, C, A and the rest

A flute is described by its height (from the bottom to the top of the wave) and its pitch (the distance between two wave tops). The letters do not run in order of size: A is the tallest, then C, B, E and F. The heights below are typical ranges published by the German corrugated board industry and a board manufacturer; individual mills differ slightly.

Flute Typical flute height Character Typical uses
F 0.6 to 0.9 mm Very fine, smooth surface Small packs with fine print
E 1.0 to 1.8 mm Fine, good print surface, compact Small boxes, retail and e-commerce boxes, mailers
B 2.2 to 3.0 mm All-round fine flute General shipping and transport boxes
C 3.1 to 3.9 mm Medium flute, more stiffness in the stack Heavier goods, boxes stored in stacks
A 4.0 to 5.0 mm Tallest flute, thickest board In our range, in the heavy AC and AAC grades

The finished board is thicker than the flute, because the liners add to it, and the exact thickness depends on the papers and the process. Multi-wall grades combine flutes: EB and BE each pair an E and a B flute, and in our suppliers’ datasheets they are separate grades with different weights, so state the grade, not only the flutes. Typical thicknesses and ECT values of each grade, and how they translate into box strength, are in ECT, BCT and the McKee formula.

Liners and fluting: the papers inside the board

The papers used for corrugated board are called containerboard or corrugated base papers. In Europe their grades are described in the list of corrugated base papers of Cepi ContainerBoard, the association of containerboard producers (sixth update, October 2022, the current edition on its website as of 13 November 2026, download page).

Paper Used as What it is
Kraftliner (brown or white) Liner Predominantly primary kraft pulp; high strength
Testliner (brown, white-top, mottled) Liner Recycled-fibre paper; the list defines four strength grades, 1 to 4
Kraft top liner Liner Recycled-fibre paper with a top layer predominantly of virgin pulp
Semi-chemical fluting Fluting Predominantly semi-chemical primary fibre pulp
Recycled fluting (medium) Fluting Recycled-fibre paper of 100 g/m² or more; below 100 g/m² the list calls it light weight medium

For liners, the list treats burst strength and short-span compression (SCT) as the most important strength properties; for fluting, crush resistance is traditionally measured as well. A white top layer gives a brighter, more even surface for printing. In the board grades we use, the liners weigh about 90 to 170 g/m² (testliner), 120 to 160 g/m² (white liners) and 115 to 175 g/m² (kraftliner), and 280 to 400 g/m² kraftliner in the heavy grades. Fluting papers weigh about 70 to 135 g/m², or 140 to 175 g/m² of high-strength fluting in the heavy grades. Most of the board grades we use are recycled-fibre boards; we also use kraftliner boards from virgin fibres. We have board with a declaration of conformity for direct food contact.

Grammage: paper grammage and board grammage

Grammage is mass per unit area, in g/m², measured under ISO 536. Two values are easily confused:

  • Paper grammage describes one layer, for example a 125 g/m² liner or a 100 g/m² fluting.
  • Board grammage is the mass of 1 m² of finished board: liners, fluting and adhesive together.

Board grammage is not the sum of the paper grammages, because the waved fluting is longer than the board. The ratio is called the take-up factor; in a worked example the US Environmental Protection Agency uses about 1.44 for C flute. As an illustration, not an offer: a C-flute board with two 125 g/m² liners and a 100 g/m² fluting weighs about 125 + 144 + 125 = 394 g/m², plus the adhesive. The grammages of the component papers can be checked after separation under ISO 3039. Datasheet grammages are nominal, and our standard tolerance on board grammage is ±5%, see tolerances on corrugated boxes.

Board grade Plies Board grammage in our suppliers’ datasheets (g/m²)
E 3 305 to 460
B 3 240 to 520
C 3 355 to 565
BE 5 505 to 670
EB 5 540 to 780
BC 5 490 to 1090
AC 5 1140 to 1415
AAC 7 1085 to 1815

These are nominal values for standard grades. The ranges overlap because the same flute can be combined with light or heavy papers.

What thickness and grammage do not tell you

A thicker or heavier board is not automatically stronger. In our suppliers’ datasheets, an AAC grade of 1085 g/m² and 12.6 mm has an ECT of 13.1 kN/m, while an AC grade of 1415 g/m² and 8.9 mm reaches 19.6 kN/m. The papers, not only the number of flutes, decide the edge crush resistance. For a box that must carry a stack, specify the ECT or BCT, or give us the weight of the goods and how the boxes are stacked and stored.

Checklist: how to specify board, and what to ask your supplier

  1. Construction. Number of plies and the flute or flute combination (for example 3-ply B or 5-ply EB), written as the grade code, not as a thickness alone.
  2. Strength. The ECT (kN/m) you need, or the load data: weight of the goods, stack height, storage time and conditions.
  3. Papers. Brown or white outer liner, and kraftliner or testliner if your print or your customer requires it.
  4. Grammage. Ask whether a grammage on the quote refers to the board or to one paper, and which tolerance applies.
  5. Food contact or other requirements. Say what will be packed, so that the supplier can confirm which documents apply.
  6. Data source. Ask where the board data come from (datasheet, batch tests) and under which test method they were measured.
  7. Format. For boxes, the FEFCO code or a drawing (see the FEFCO code catalogue) and inside dimensions; for sheets or rolls, size or roll width and quantity.

Board and boxes from Kartoniki.eu

Kartoniki.eu (LOFREE Sp. z o.o. sp. k.) makes corrugated boxes and other products in Lubartów, Poland, from 3-ply E, B and C, 5-ply EB, BE, BC and heavy AC, and 7-ply AAC board, and supplies board as sheets and rolls. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. Send us the product, its weight and how it travels through our home page, and we will propose the board.

Frequently asked questions

Is cardboard the same as corrugated board?

Not quite. Cardboard is an everyday word for any heavy paper-based material. Corrugated board is a specific construction: a fluted paper glued between flat paper liners. Solid boards such as cartonboard have no flutes. Shipping boxes are almost always made of corrugated board.

What do single wall, double wall and triple wall mean?

They count the fluted layers. Single wall board has one flute between two liners (3-ply), double wall has two flutes and three liners (5-ply), triple wall has three flutes and four liners (7-ply). Single face board is one flute glued to one liner, with the flutes exposed.

What do the flute letters E, B, C and A mean?

They name flute sizes, and they do not run in order of size. Typical flute heights are about 1.0 to 1.8 mm for E, 2.2 to 3.0 mm for B, 3.1 to 3.9 mm for C and 4.0 to 5.0 mm for A. Combinations such as EB, BE, BC, AC and AAC name the flutes in multi-wall board.

What is grammage, and why is board grammage not the sum of the papers?

Grammage is mass per square metre in g/m². Board grammage covers the whole board: liners, fluting and adhesive. Because the fluting is waved, a square metre of board uses more than a square metre of fluting paper, so the fluting counts more than its own grammage.

What is the difference between kraftliner and testliner?

Kraftliner is made predominantly from primary (virgin) kraft pulp. Testliner is made from recycled fibres. Both come in brown and white-top versions. Most of the board grades we use are recycled-fibre boards, and we also use kraftliner boards where the specification needs them.

Is thicker or heavier board always stronger?

No. Strength depends on the papers as well as on the flutes. In the datasheets of our board suppliers, a 7-ply AAC grade of 1085 g/m² has an ECT of 13.1 kN/m, while a 5-ply AC grade of 1415 g/m² reaches 19.6 kN/m. Specify the ECT you need, not only the flute or the weight.

Can you make board with a special composition?

For 7-ply AAC board, yes: we can have special compositions made, with the paper grammages and flutes chosen for the strength you need. For other grades we propose a grade from our range. Send the weight of the goods and how the boxes are stored.

Do you sell corrugated board in sheets or rolls?

Yes. Besides boxes, we supply corrugated board as sheets and as rolls, including single face board. Tell us the flute, the papers, the sheet size or roll width and the quantity, and we will confirm what we can supply in the quote.