Corrugated Archive Boxes: Constructions, Board, Sizing for Binders and Labelling

Corrugated archive boxes hold documents, binders, folders and data media that have to stand on shelves or in stacks for a long time, not just travel from one place to another. We make them to size: for a particular binder, for A4 or for non-standard files, with a lid or with flaps, with handles and with descriptive print. This guide is for company archives, accounting offices, law firms, public bodies, medical facilities and companies that archive other people’s documents or move offices. It covers constructions, board, sizing, archive requirements, labelling and storage.

We make everything to size and in quantities matched to your needs, so dimensions can follow your binders instead of a catalogue.

Constructions of archive boxes

Construction What it is Where it fits
Flap box Folded from one sheet, the classic FEFCO 0201 type, closed with tape A one-off hand-over of documents to an archive
Box with a separate lid Opens without destroying the carton Files that are returned to regularly

Standard flap cartons suit simple jobs, and when the binders have a non-standard size we make the box to size. The styles themselves are explained in the FEFCO codes catalogue. A box can also have:

  • handles cut in the side walls, for carrying and taking from a stack;
  • a field for a label or a list of contents, also printed;
  • dividers for folders or media (ask about the construction);
  • grey (kraft) or white board.

Which board for archive boxes

The board is chosen to suit how the box will be stored. The higher the stack and the heavier the contents, the stronger the wall must be. The table shows typical directions, not promised values.

Situation Typical board What to watch
Single boxes, low stacks, short storage 3-layer, B flute Simple construction, easy to fold
Tall stacks on shelves and pallets 5-layer Stronger walls, check the stacking height
Archive with raised humidity 5-layer and a solution agreed in the enquiry Describe the conditions in the enquiry

Sizing for binders and documents

The commonest mistake is choosing a box by eye. The box should hold the contents with a small clearance so they slide in and out without tugging and do not shift inside. Measure the real items, not catalogue sizes. We need:

  • the spine width of the binder and how many binders go in one box;
  • the height and depth of the binder or folder;
  • the layout: binders standing or lying;
  • the document format (A4 or other) and any media;
  • the planned height of the stack on a shelf or pallet.

Keep to two or three sizes across the whole archive. Uniform boxes stack more easily and make better use of shelves and pallets, see how many boxes fit on a pallet and how to state box dimensions.

Archive requirements: state them in the enquiry

Archives and institutions often have their own requirements for the box material, for example for the pH of the paper, acid-free board or the storage period. We do not declare these parameters in advance and we do not promise compliance with particular regulations or guidelines. The requirements come from your archive, so please state them in the enquiry. Send a document with the requirements or describe them in your own words. We will check what we can offer and say plainly if a requirement cannot be met, so that you do not order boxes that will not work in your archive.

Print and marking

A box in an archive has to be findable. We print what helps identification: a field for a number and description, the name of the unit, a logo, a department symbol. We use flexo in up to four colours or digital print, and one colour is often enough for a simple description.

Stacking strength and conditions in the store

The bottom box in a stack carries the weight of all the boxes above it, and paper is heavy. For taller stacks the thickness of the board is not enough on its own, its compression strength counts, see ECT, BCT and the McKee formula. The second factor is humidity. Board absorbs moisture from the air and loses stiffness, which matters in a tall stack over a long time, see how humidity affects corrugated board. Do not stand boxes directly on the floor in damp rooms, and if conditions are hard, describe them in the enquiry.

What to send for a quotation

  • Inside dimensions, or the binder dimensions and their number per box.
  • Closure: flaps or lid.
  • Planned stack height and storage time.
  • Approximate weight of a full box.
  • Conditions in the store (humidity, heating).
  • Archive requirements for the material.
  • Print: colours, content, place for a label.
  • Quantity and destination country.

How to order

Send the details through our home page. We reply with a quotation within a few hours on working days. Most orders leave our plant within 7 days; orders that need artwork approval, test prints, plotter samples, a new cutting die or a very complex construction take longer, up to 16 working days. We ship from Poland across Europe and make boxes in quantities matched to your needs. Before a larger run we can make a prototype for checking in your archive. Read the guide to buying cartons from Poland, right-sizing your cartons and our wholesale terms.

See also: Moving Boxes for Removal Companies, Offices and Storage: Sizes, Board and Print

See also: Corrugated Storage Bins and Picking Boxes vs Plastic Bins: When Cardboard Makes Sense

Frequently asked questions

Do you make acid-free archive boxes?

Requirements for the material, such as acid-free board or pH, must be stated in the enquiry. We do not declare them in advance: we check what we can offer for your archive and say plainly whether a requirement can be met.

What box size should I choose for a binder?

Measure the spine width, height and depth of the binder and decide how many should fit in a box. Add a small clearance for sliding in and out. We make any size, so the box does not have to match a catalogue size.

Can archive boxes be stacked?

Yes, with the right board and construction. It depends on the stack height, the weight of the contents, the storage time and humidity. State these in the enquiry and we will choose the board; for large stacks we can make a prototype.

Can numbering and a description be printed on the box?

Yes. We print by flexo in up to four colours or digitally: a logo, the name of the unit, a field for a number and description or a place for a sticker. Send a design or describe how the marking should look.

Can the boxes have handles?

Yes, we make handles cut in the side walls. They make it easier to carry the box and to take it from a stack. Their shape and position are fitted to the size of the box and the weight of the contents.

How long does it take?

Quotation within a few hours on working days and dispatch from our plant usually within 7 days (max. 16 working days). We ship from Poland across Europe.