Corrugated Storage Bins and Picking Boxes vs Plastic Bins: When Cardboard Makes Sense

Corrugated storage bins make sense when you need many bins in sizes that fit your own shelves, want to rearrange a warehouse quickly, store dry goods and would rather replace a worn or dirty bin than wash it. They arrive flat, are folded by hand and can be printed with locations or codes. Plastic bins, usually moulded from polypropylene, are the better choice for wet or washed zones and long service lives, but a size outside a maker’s range needs a new mould. We state no load ratings in kg: test bins with your own goods.

What corrugated storage bins and picking boxes are

A corrugated storage bin, also called a shelf bin or parts bin, is an open box with a lowered front: you see the contents and can reach in even when bins stand close together on a shelf. A picking box collects the items of one order or batch; it can be a bin, a tray or a box that later goes out with the goods.

Most shelf bins are one-piece folding designs. In the FEFCO code, group 04 covers folder-type boxes and trays: usually one piece of board, with the bottom hinged to form the side walls, and locking tabs or handles possible in some designs. Corrugated bins of this group are typically delivered flat and folded by hand without glue (depends on the design). Dividers and inserts can split one bin into several compartments for small parts.

Corrugated vs plastic bins at a glance

Criterion Corrugated bins Plastic bins
Material Corrugated board, 3-ply, 5-ply or 7-ply Usually polypropylene (PP), moulded
New size Made from a new blank; some constructions need a cutting die, a one-off cost A size outside the maker’s range needs a mould, the main fixed cost of injection moulding
Before use Delivered and stored flat Keep their shape; many models stack
Weight Blank area × board grammage; ask for the weight per bin From the maker’s datasheet
Wet or washed zones Not recommended; strength falls as humidity rises Can be washed with water and detergent; resist many oils and cleaners
Service life Shorter; a worn or soiled bin is replaced Long; bins are cleaned and reused
Marking Printed directly, or marked with a label or marker Usually labels; ask how they stay on after washing
After use A bin made only of board can go into the paper collection container Ask the maker or your waste contractor which collection stream applies

When cardboard makes sense, and when plastic is better

Situation Better choice Why
Many bins in non-standard sizes, for example to use the full shelf depth Corrugated Every size is made to your dimensions without a plastic mould
A new warehouse layout, a seasonal range or a temporary store Corrugated Bins can be reordered in new sizes and the old ones put in the paper collection
Dry goods such as cosmetics, accessories, small electronics or office materials Corrugated Dry conditions keep the board strength; print helps picking
Picking boxes that leave with the order Corrugated The box is packaging that goes out with the goods, not equipment that has to come back
Wet, oily or washed zones, cold stores with condensation Plastic Board loses strength in moisture and cannot be washed
Bins that circulate for years between your own sites Plastic Long service life; within a re-use system under the PPWR from 2030 (see below)
Heavy parts with sharp edges or rough handling Test both Puncture and compression depend on the board and construction; we give no kg figures

Sizing bins to your shelves

Catalogue bins rarely match your shelving. If a shelf is 600 mm deep and the bin 400 mm, one third of the depth stays empty (illustration, not an offer). A bin made to your dimensions follows four measurements:

  1. Depth = shelf depth, less any clearance you need at the back or front.
  2. Width = shelf width divided by the number of locations you want, less a little play between bins.
  3. Height = clear height between shelves, less room for the hand.
  4. Front height = low enough to see and grab the items, high enough to keep them in.

Weight follows from the blank: a blank of 0.4 m² in B-flute board of 240 to 520 g/m² weighs 96 to 208 g (illustration, not an offer). Ask for the weight per bin, as it depends on the construction and the board.

Choosing the board

We work with 3-ply board in E, B and C flutes, 5-ply board in EB, BE and BC, heavy 5-ply AC and 7-ply AAC. Light items usually go in 3-ply board, heavier parts in 5-ply board. Two values help to compare boards: ECT, the edge crush resistance of the board, and BCT, the compression strength of the finished bin, which matters when bins are stacked (see ECT, BCT and the McKee formula). For items with sharp edges, ask about puncture resistance as well.

Corrugated board takes up moisture from the air and loses compression strength as relative humidity rises; under a constant load its stacking life falls further when the humidity cycles. Keep corrugated bins in dry zones. For damp storage, ask about moisture-resistant board (see wax-free moisture-resistant boxes) and test it in your conditions. For electrostatic-sensitive components, antistatic (ESD) board is available on enquiry; check it against your own ESD requirements.

Printing and labelling

Print can carry logos, location numbers, barcodes or QR codes for the warehouse management system, and colour zones that guide pickers. We print flexographically for repeating designs and digitally in UV technology, which can add variable data such as a different location code or QR code to every bin. Colours can be matched to Pantone. For the choice between the methods see printing on corrugated boxes. Test that printed codes scan in your light, with your scanners, before you order the full quantity.

Bins, picking boxes and the PPWR

Regulation (EU) 2025/40 (PPWR) defines packaging as an item used for the containment, protection, handling, delivery or presentation of products to another economic operator or to an end user (Article 3(1), point 1). A bin that never leaves your own warehouse may therefore fall outside that definition, while a picking box that goes out with the goods is packaging. From 1 January 2030, transport packaging such as boxes, trays, plastic crates and foldable plastic boxes used between an operator’s own sites must be reusable within a re-use system (Article 29(2)); cardboard boxes are exempt from these re-use targets (Article 29(4)(d)). Article 29(5) sets a 10% re-use target for grouped packaging in the form of boxes, excluding cardboard. For the rules on returnable cartons see returnable and reusable cartons under the PPWR. Text: Regulation (EU) 2025/40 on EUR-Lex. Status 13 November 2026; general information, not legal advice.

Checklist: what to ask a bin supplier

  1. Fit. Are the bins made to my shelf depth, width and clear height, with the front height I need?
  2. Board. Which board and flute, and what are its ECT and the BCT of the finished bin?
  3. Load. Can I get sample bins to test with my heaviest and sharpest items? Expect no kg figure without such a test.
  4. Conditions. What humidity and temperature are the bins meant for? Are there damp, cold or washed zones in my warehouse?
  5. Assembly and compartments. Are the bins delivered flat and folded without glue, and can dividers be added?
  6. Print. Flexographic or digital, fixed or variable data, and does the code scan with my equipment?
  7. Fire safety. Does a change of bin material matter for my racking and sprinkler design? Ask your fire safety adviser or insurer.
  8. Replacement. How quickly can I reorder the same bin, and is the cutting die kept for repeat orders (see one-off costs for custom boxes)?

What we can do

We make corrugated storage bins, picking boxes, trays, dividers and inserts to your dimensions, in 3-ply, 5-ply and 7-ply board, printed flexographically or digitally in UV technology, or unprinted. Bins are delivered flat. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. Most orders are delivered within 7 days (max. 16 working days). Delivery within the EU is by agreement. We state no load in kg and no service life in advance.

What to send us

Send the shelf depth, width and clear height, the bin height and front height, the approximate weight and type of contents, the number of bins, the conditions in the storage area and whether you need print or codes. Send your enquiry through our home page.

Frequently asked questions

Are corrugated storage bins strong enough for spare parts and fasteners?

That depends on the board and the construction. Light items usually go in 3-ply board, heavier parts in 5-ply board such as EB, BE or BC. We state no load in kg without test data: test sample bins with your real parts, and check the BCT if bins are stacked.

Can cardboard bins be used in damp areas or cold stores?

We do not recommend standard corrugated bins for wet or washed zones. Board takes up moisture from the air and loses compression strength as relative humidity rises. For wet zones plastic bins are the usual choice; for damp storage ask about moisture-resistant board and test it in your conditions.

How are corrugated bins delivered?

Flat. They are typically folded by hand without glue (depends on the design) just before they go on the shelf, so spare bins take little space.

Can you make bins that fit our shelves exactly?

Yes. We make bins to your dimensions. Tell us the shelf depth and width, the bin height and front height, the approximate weight of the contents and how many bins you need.

Can bins be printed with location codes, barcodes or QR codes?

Yes. A repeating design such as a logo or colour zone can be printed flexographically; a different code on each bin, such as a location number or QR code, can be printed digitally in UV technology as variable data.

Do picking boxes fall under the PPWR re-use targets?

Cardboard boxes are exempt from the re-use targets for transport packaging (Article 29(4)(d) of Regulation (EU) 2025/40). Plastic crates and foldable plastic boxes used to move goods between your own sites must be reusable within a re-use system from 1 January 2030 (Article 29(2)). Status 13 November 2026; general information, not legal advice.

Can you make antistatic bins for electronic components?

Antistatic (ESD) corrugated board is available on enquiry. Check the board against the ESD requirements of your own site before you use the bins for sensitive components.

Is there a minimum order quantity?

We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote.