Packaging EPR for Empty Boxes Bought from Another EU Country (2026 Guide)
As of 22 November 2026. For companies buying empty corrugated boxes from a manufacturer in another EU country to pack goods in or resell. General information, not legal advice: confirm your case with the register or producer responsibility organisation (PRO) in the table.
Short answer
For transport packaging such as corrugated boxes, the Commission’s PPWR guidance says: “If transport packaging is made available for the first time in a Member State other than the Member State, where the manufacturer of packaging is located, the manufacturer will only be the producer, if the recipient is the end user of the packaged product. If this is not the case, the recipient will be the producer.” So if you fill or resell the boxes, you are usually the obligated producer in your country.
If you only use the boxes yourself and do not pass them on with goods (for example for storage or moving), different rules can apply – check with your register or PRO.
Printed or plain: the PPWR “manufacturer”
Separately from EPR, the PPWR, applicable since 12 August 2026, names one “manufacturer” per box. Per the Commission guidance, for plain transport boxes this is normally the box maker; boxes carrying your name or trademark make you the manufacturer. The manufacturer handles conformity assessment, technical documentation and the EU declaration of conformity; each box shows a type or batch number and the manufacturer’s name and postal address. See our PPWR checklist for packaging buyers.
Country table
| Country | Who is obligated for empty boxes bought from abroad | Register / organisation | Mandatory marks on B2B boxes | Key dates |
|---|---|---|---|---|
| Germany | First German company in the supply chain: you or a reselling wholesaler | LUCID register; household e-commerce boxes: a dual system | None; if marked, only Annex 2 codes (PAP 20) | VerpackDG since 12 Aug 2026; LUCID update by 12 Nov 2026 |
| Austria | Austrian packer or importer (§ 13g AWG) | EDM register; approved collection system | None found (unverified) | AWG/VVO amendment: no date |
| France | The recipient (Commission rule); French rule not yet aligned | EPRO: Citeo Pro, Léko Pro, Twiice; consumer e-commerce: Citeo, Léko | None for B2B; Triman + Info-tri on consumer e-commerce boxes | EPRO from 1 Jan 2027 |
| Belgium (FR / NL) | Belgian packer ordering abroad remains the producer | Valipac (industrial), Fost Plus (household) | None | New definition 12 Aug 2026, no 300 kg threshold; Valipac declaration 28 Feb |
| Netherlands | Recipient established in the Netherlands; fee above 50,000 kg/year | Verpact | None | PPWR pause for transport and e-commerce packaging to end-2026 (secondary source) |
| Italy | Buyer: form 6.1 and CAC if it fills; “produttore” if it resells | CONAI; paper CAC €45/t | Yes: PAP 20 on the box or in documents; consumer packaging also sorting instructions | Until the EU label applies |
| Spain | Packer or importer of packaged products; box makers are not | RPP register + SCRAP (e.g. Envalora, Cartón Circular) | Codes voluntary; some claims banned | Yearly: SCRAP 28 Feb, RPP 31 Mar |
| Czechia | Czech importer of the empty boxes | EKO-KOM | Voluntary; PPWR identification not yet penalised | Adaptation act: no date |
| Slovakia | Slovak recipient of plain boxes, packing or reselling | MŽP SR register; NATUR-PACK, ENVI-PAK or Reclay | Voluntary, durable | Amendment: no date |
| Romania | Romanian company placing packaged products, also for own use | AFM; optionally an OIREP | If marked: Annex 3 (PAP 20) | EPR bill PL-x 297/2026 pending |
| Lithuania | Lithuanian importer or packer | GPAIS | Voluntary | New PRO licensing from 1 Sep 2026 |
| Latvia | First seller of packaged goods in Latvia (natural resource tax) | VVD; system membership from 300 kg/year | No rules found | PPWR register in preparation |
| Estonia | Packer or importer of packaged goods; the buyer for goods from the EU | PAKIS register; recovery organisations | Voluntary | New PakS from 1 Jan 2028 |
| Ukraine | No packaging EPR yet | None | None | Bill 10066-2 in committee |
| United Kingdom | UK-established business above 25 t and £1m | pEPR; PackUK fee for household packaging | None (labelling shelved) | Confirmed fees end Nov 2026 |
| Ireland | Irish packer or importer; Repak if over 10 t and €1m | Repak | EU rules only | PPWR since 12 Aug 2026 |
Marks across Europe
- Italy: marking has been mandatory for all packaging since 1 January 2023. For B2B the code PAP 20 is enough, on the box or in accompanying documents; consumer packaging also needs sorting instructions (CONAI).
- France: Triman + Info-tri on e-commerce boxes for consumers (the online shop’s duty); professional tertiary packaging is exempt (Citeo).
- Other countries: voluntary, though Germany and Romania prescribe the codes if you mark.
- EU: from 12 February 2027 the Green Dot is allowed only in a QR code or other digital marking (Czech ministry). The EU sorting label follows from 12 August 2028 at the earliest, for e-commerce but not transport packaging; its implementing act was still missing in autumn 2026 (ppwr.how). National labels then give way, and Decision 97/129 codes such as PAP 20 are not allowed after 12 August 2028 (Commission guidance).
Data to ask your supplier for
- Mass per material, per box: reports go by weight and material, e.g. UK, Romania, Estonia.
- Composites: composite rules apply above 5% of another material in Italy and above 5% plastic in the UK; Latvia taxes composite board at €1.25/kg against €0.24/kg for paper.
- Plastic parts (tape, windows, lamination): Spain’s plastic packaging tax of €0.45/kg applies to them (Ley 7/2022).
- Recyclability proof: without it, Lithuania applies the higher tax rate.
Dates 2026–2028
| Date | What happens |
|---|---|
| 12 Aug 2026 | PPWR applies; VerpackDG in Germany; new producer definitions in Belgium, Czechia and Slovakia |
| End Nov 2026 | UK: confirmed 2026/27 fees |
| 1 Jan 2027 | France: EPRO starts |
| 12 Feb 2027 | National PPWR penalties due; Green Dot digital only |
| 12 Feb 2028 | Empty-space methodology due; the 50% cap binds fillers from 2030 |
| 12 Aug 2028 | Decision 97/129 codes end; EU sorting label at the earliest |
What we can do for you
We are a manufacturer of corrugated board packaging in Lubartów, Poland, on the market since 2019, with over 3,000 m² of production space. We make boxes to your dimensions in FEFCO styles from 3-, 5- and 7-ply board.
- Print: flexographic print in up to 4 colours or digital UV print. We can print the material code (e.g. “PAP 20” with the recycling symbol) and the sorting marking you need, such as Triman with Info-tri or Italian sorting instructions. The content is yours; we print what you approve.
- Plain boxes without print, and on request mono-material boxes without film lamination or varnish.
- Box weight on request, for your reports.
- Quote within a few hours on working days; we correspond in writing (e-mail, form) in your language.
Run size is matched to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote.
Send an enquiry or read our guide to buying boxes from Poland and article on printing boxes. Selling online to consumers abroad? See EPR for online sellers in the EU.
Sources
- Regulation (EU) 2025/40, EUR-Lex
- Commission guidance C(2026) 3702
- ZSVR: Serviceverpackungen and PPWR
- Guida CONAI 2026
- MITECO: FAQ envases
- gov.uk: EPR for packaging
Frequently asked questions
Do I pay packaging EPR for empty boxes bought from a manufacturer in another EU country?
Usually yes. Under the Commission’s PPWR guidance, the recipient in the destination country is the producer unless it is the end user of the packaged product. If you fill the boxes or resell them, you register and pay in your own country, through the register or PRO there.
Does it matter whether the boxes carry my logo?
For the PPWR manufacturer role, yes: plain transport boxes are normally the box maker’s responsibility, while boxes with your name or trademark make you the manufacturer. For EPR it usually does not matter: if you fill or resell boxes bought abroad, you are usually the producer either way.
Which marks must be on B2B corrugated boxes?
In most countries none. Italy requires the material code PAP 20 even for B2B, on the box or in accompanying documents. France requires Triman and Info-tri on e-commerce boxes sent to consumers. Elsewhere marks are voluntary, although Germany and Romania prescribe which codes to use if you mark.
When does the EU harmonised sorting label apply?
From 12 August 2028 at the earliest, and later if the implementing act comes late; it was still missing in autumn 2026. It covers e-commerce packaging but not transport packaging. Decision 97/129 codes such as PAP 20 are not allowed after 12 August 2028.
What should I ask my supplier for?
The mass of each box by material, and details of any plastic parts such as tape, windows or lamination with their share of the mass. Composite rules apply above 5% in Italy and the UK, Latvia taxes composite board at a higher rate, and Lithuania taxes packaging without proof of recyclability at the higher rate.