Cardboard Furniture, Playhouses and Toys for Brands: Custom Die-Cut Corrugated Products Made to Order

Cardboard furniture, cat houses, children’s playhouses and kitchens or flat-pack shelves are products that a brand or a shop can add to its own range. We make them to size for businesses: to your design or from an idea, with a die-cut fitted to the construction and print in your brand colours. This is an offer for companies, not a do-it-yourself guide: we produce series under your brand in quantities matched to your needs. Below we describe what can be done, how board and construction are chosen and what to put in an enquiry.

What we can make from corrugated board

  • Cat houses and scratchers, including multi-level ones with holes and shelves.
  • Children’s play houses, kitchens and theatres, also ones to colour in.
  • Self-assembly toys and puzzles.
  • Flat-pack shelves, racks and small tables.
  • Organisers and storage boxes.
  • Seasonal and event furniture, for example counters and seats; larger builds are covered in displays, trade-show stands and POS from corrugated board.

Construction: board, die-cut, assembly

Most of these products are made from sheets cut by a die to size and assembled without glue or tools: the parts slot into cut-outs and tabs. This is why the product reaches the customer flat in a thin shipping carton, which limits transport cost and store space. We also make glued versions where the construction needs it. Constructions are explained in our article on die-cut and slotted cartons and in the FEFCO catalogue.

We match the board to the size of the product and the load. The table shows the usual directions; the difference between the layers is explained in ECT, BCT and the McKee formula.

Product Typical board and construction What to watch
Light toys, puzzles, small houses 3-layer, flute E or B A smooth surface for print and colouring
Large children’s houses, shelves, tables 5-layer, double walls where needed Stiffness of walls and joints
Cat houses and scratchers 3-layer or 5-layer, double walls at loaded points The user (the animal), stability, moisture
Event and seasonal furniture 5-layer, reinforcement at load-bearing points Repeated assembly, flat transport

Print, colouring and finish

The products can be in grey (kraft) or white board, printed in your brand colours, or left raw so that the user colours them. For runs we use flexo in up to four colours, and for shorter runs and rich graphics digital print. For higher-quality graphics there is lamination with a printed sheet, and parts can also be varnished. Short runs are described in short-run corrugated cartons.

Who this is for and in what runs

  • Pet shops that want their own line of houses and scratchers.
  • Children’s and toy shops, including e-commerce.
  • Brands launching a new product or a limited edition.
  • Schools, nurseries and educational institutions.
  • Agencies running campaigns and brand activations.
  • Companies that need seasonal or event furniture.

We produce under your brand, with one or several print designs and any number of pieces.

Design and preparing the die-cut

If you have a finished design, send it as vectors with bleed and marked cut, crease and perforation lines. If you only have an idea, describe the dimensions of the finished product, the number of parts and the way they join, and we will prepare a proposed construction. At this stage we also agree whether the product assembles without glue or some parts are fixed permanently, and where on the parts to put print and the assembly instructions.

Legal requirements for toys and children’s products

Toys and products for children are subject to legal requirements whose scope depends on the intended use and the age of the user. We do not claim that a corrugated product meets specific standards. Check the requirements for your product before ordering and give them in the enquiry: we will choose the board and construction and say plainly what we are able to provide.

Tips for choosing and quoting

  • Start with a prototype. The die-cut construction decides stability, and corrections are easier before the run.
  • Describe the load: who or what will be on the product (a cat, a child, books on a shelf). We do not give load figures; we choose the construction after talking to you.
  • Allow for moisture. Board absorbs moisture, so in damp rooms or outdoors it needs protection.
  • Count the shipping pack. A product shipped flat has its own dimensional weight; see dimensional weight and choosing a carton and e-commerce packaging.
  • Plan assembly. Say who assembles the product (the customer or the shop) and whether the instructions should be printed on a part.
  • Think about end of life. Board is recycled with paper where local rules allow.

What to put in an enquiry

  • The product, its finished dimensions and the number of parts.
  • The design or the idea, and whether the product is to be coloured in.
  • The intended use and the load.
  • The target age group and the legal requirements that apply to your product.
  • The run size and the print design.

How to order

Send the details through our home page. We reply with a quotation within a few hours on working days and most orders leave our plant within 7 days; orders that need artwork approval, test prints, plotter samples, a new cutting die or a very complex construction take longer, up to 16 working days. We ship from Poland across Europe and can make a prototype before the run. Read the guide to buying cartons from Poland and our wholesale terms.

See also: Hay Feeder Made from One Sheet of Corrugated Board: a Packaging Case Study

See also: Oversized (XXL) Corrugated Boxes: How to Specify Very Large Cartons for Machines, Furniture and Bulky Goods

See also: Cardboard Urns, Coffins and Funeral Packaging, and Cardboard Ballot Boxes: What to Specify Before You Order

Frequently asked questions

Do you make cat houses from cardboard in runs under our own brand?

Yes. We make houses and scratchers to size, with a die-cut to your design and print in your brand colours. A run can have several designs, and the product reaches the shop flat.

Is cardboard furniture safe for children?

The legal requirements for toys depend on the product and the age of the user, so check them for your product and give them in the enquiry. We do not claim that a given product meets specific standards; we choose the board and construction and say plainly what we can provide.

How strong will a cardboard shelf or table be?

It depends on the board, the construction and the load. We use 5-layer board and double walls at load-bearing points. We do not quote figures in advance: describe what is to stand on the shelf or table, and for heavy loads we will suggest a prototype.

Can the products be shipped flat?

Yes. Most products assemble without glue or tools, so they reach the customer flat and the user assembles them after unpacking. A flat pack lowers the shipping cost and saves store space.

Can you make a die-cut to my design?

Yes. We make die-cuts to size, and you can send the design as vectors or just describe the idea. Before the run we suggest a prototype to check the construction and the artwork.

How long does an order take?

We send a quotation within a few hours on working days and most orders leave our plant within 7 days (max. 16 working days). For campaigns and seasonal launches plan the order in advance, especially when a prototype comes first. We ship from Poland across Europe.