Packaging for Cutting Tools: Corrugated Boxes and Inserts for Drills, Milling Cutters and Blades
Packaging for cutting tools is a box, a tube-type carton or an outer carton with an insert that holds the drill, milling cutter, indexable insert or blade in a fixed position and keeps the cutting edge from touching a wall. The insert does most of the work: it stops the tool from moving, protects the edge from knocks and keeps it away from the hands of the person who opens the box. We make such packaging to size from corrugated board, as unit boxes, sets and outer cartons for tool makers and distributors.
Typical products and what can go wrong in transport
A cutting tool is small, but heavy for its size, and its edge is both sharp and sensitive. These are the usual risks and the design answers:
| Risk | What helps |
|---|---|
| The edge cuts through a thin wall because the tool is heavy for its volume | An insert that keeps the edge away from the walls; holes and grooves cut so that the tool never rests on its edge |
| The tool moves in the box and edges knock against each other | An insert made to size with holes or dividers, without play, one place per tool |
| Someone is cut when opening the box or unpacking a carton | The edge does not face the opening and does not stick out of the insert; unit boxes inside the outer carton instead of loose tools |
| Size mix-ups in a large tool family | Clear marking of diameter and type, and a few standard box sizes with different inserts |
Which packaging for which tool
| Product | Packaging | Notes |
|---|---|---|
| Single drill or milling cutter | Unit box, die-cut or with a lid, with an insert with holes | Often also the sales packaging on a shelf or in a parcel |
| Long drills, reamers and cutters with a high length-to-diameter ratio | Rectangular tube-type box or telescopic box made to the tool size | Rigid along its length; see tube-type cartons |
| Indexable inserts, drill sets, small accessories | Box with a flap or lid, opened many times, with dividers and a place for the size marking | Insert layout follows the set |
| Saw blades and machine knives | Flat carton or folder with an insert or cover that encloses the edge | Die-cut boxes up to 260 × 150 cm |
| Several to several dozen pieces for wholesalers, service centres and distributors | Outer carton with dividers, an insert with holes or layer pads, often with unit boxes inside | Unit boxes and outer carton designed together |
| Tools sent for regrinding and back | Sturdy box with an insert that can be opened and closed again | Tell us if the same box should make the return trip |
Inserts: how the tool is held
We cut inserts from corrugated board to size, with holes, grooves and dividers matched to the diameter and length of each piece. Dividers, lattices, layer pads and inserts can be made in any size. For precision tools that need a softer contact we can supply foam inserts in cooperation with partners.
- Edge away from the walls. The tool is held by the shank or body, so the cutting part hangs free or sits in a recess.
- No play. A tool that can move will hit the wall or its neighbour; holes are cut to the diameter, not to the largest size in the range.
- Safe removal. The tool should come out shank first, without reaching past an edge.
- Fewer sizes. One box with different inserts can serve several diameters, which simplifies stock and ordering.
Filling the box with paper is not a substitute for an insert, and under the PPWR filling materials count as empty space (Article 24(3) of Regulation (EU) 2025/40). From 1 January 2030 or 3 years after the implementing acts on the method, whichever is later, grouped, transport and e-commerce packaging may have at most 50% empty space (Article 24(1)); sales packaging used as e-commerce packaging is exempt (Article 24(5)). Status as of 13 November 2026; general information, not legal advice. More in void fill and product protection compared.
Choosing the board
We choose the board for the weight and size of the contents. For unit boxes thin E flute (about 1.5 mm) is usually enough. Outer and shipping cartons are made of 5-layer board. Our range:
- 3-layer: E, B, C;
- 5-layer: EB, BE, BC and heavy AC;
- 7-layer: AAC, for the heaviest loads.
We do not quote load capacities in kilograms. What the flute letters and layers mean is explained in cardboard vs corrugated board. If you are unsure about a construction, we make a prototype before the run, and package tests (compression, drop, transport simulation) can be arranged in a partner laboratory; terms are agreed individually.
Marking and identification
Diameter, type and series should be readable without opening the box. We print by flexography in up to 4 colours or digitally in UV technology, which suits many size versions in small runs and variable data. Logos, barcodes, size markings and technical data can go on the box; for a more representative look we offer litho-lamination and varnishes.
| Code (GS1) | Typical place | What it carries |
|---|---|---|
| EAN-13 | Unit box sold at retail point of sale | GTIN-13 of the item |
| ITF-14 | Outer case or carton in general distribution; suits direct printing on corrugated board; cannot be used at retail point of sale | GTIN of the trade item |
| GS1-128 | Cases, pallets and logistic labels | GTIN plus extra data such as batch number, quantity or the SSCC of a shipping unit |
Codes and numbers come from you; ask for a scan test on the printed sample. Handling marks such as fragile or keep away from rain can be printed as well; see handling marks on cartons. A symbol does not replace protection inside the box.
Moisture, corrosion and export
Corrugated board absorbs moisture and is not a moisture barrier. If your tools rust easily, are stored in a damp place or travel by sea, say so in the enquiry. A VCI solution can be agreed, and a film bag or liner made by a partner can be supplied together with the box. We make no promise about protection time; the options are described in packaging for humidity, cold and corrosion. For shipments outside the EU see corrugated export packaging, and if the cartons travel on wooden pallets, ISPM 15.
Checklist for the buyer
- Tool data. Diameter and length of each tool, or the range in the product family, weight, and where the cutting part is.
- Quantities. Pieces per unit box and per outer carton, number of size versions, expected yearly volume.
- Sales channel and safety. Shelf, parcel, warehouse or service centre; who opens the box, and does it come back after regrinding?
- Conditions. Storage humidity, sea transport, storage time, need for corrosion protection.
- Print and codes. Logo, size marking, which barcodes (EAN-13, ITF-14, GS1-128), number of versions, colour references.
- Proof. Prototype with your tools, fit of unit boxes in the outer carton, scan test of codes.
What we can do
We are a manufacturer of corrugated packaging in Lubartów, Poland. We design and produce unit boxes with inserts, boxes with lids and dividers, tube-type boxes for long tools and outer and shipping cartons, with print and codes. We can match colours to Pantone. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote. Most orders are delivered within 7 days (max. 16 working days). Delivery within the EU is by arrangement; we already supply customers in Lithuania, Germany, Slovakia, Czechia and the Netherlands.
Sources
Regulation (EU) 2025/40 on EUR-Lex (Article 24); GS1: Can ITF-14 be used at the retail point of sale? and GS1 Sweden on ITF-14. Checked on 13 November 2026.
What to send us
Send the diameters and lengths of your tools (or a sample), the quantities per unit box and outer carton, the sales channel, the print and codes you need, and the storage and shipping conditions. We reply to enquiries within a few hours on working days. Send your enquiry through our home page.
Frequently asked questions
What is the best packaging for cutting tools?
For a single drill or milling cutter, a unit box with a die-cut insert that holds the tool and keeps the cutting edge away from the walls. Long tools go into rectangular tube-type boxes, indexable inserts and sets into boxes with a lid and dividers, larger quantities into outer cartons with dividers.
Can you make an insert with holes for specific drill diameters?
Yes. We cut inserts to size, with holes, grooves and dividers matched to the diameter and length of your tools. Send the sizes or a sample.
How do you stop a milling cutter from piercing the box?
The tool must not rest with its edge against a wall. An insert keeps the edge away from the walls, the board is chosen for the weight of the contents, and outer cartons get dividers or layer pads.
Does a corrugated box protect tools against corrosion?
Board alone is not a moisture barrier. If corrosion matters, tell us how the tools will be stored and shipped: a VCI solution can be agreed in the enquiry, and a film bag or liner made by a partner can be supplied with the box. We make no promise about protection time.
Which barcode should go on a tool box?
It depends on where the box is scanned. GS1 uses EAN-13 for items sold at retail point of sale and ITF-14 for cases and cartons in general distribution; ITF-14 suits printing directly on corrugated board and cannot be used at retail point of sale. GS1-128 carries extra data such as batch number or quantity. We print the codes and numbers you give us.
Can one box size serve several tool diameters?
Often yes: one outer size with different inserts can hold several diameters, which means fewer box sizes in stock and fewer mix-ups.
Can you make packaging for long drills and reamers?
Yes, as rectangular tube-type boxes with up to 240 cm of inside length and cross-sections such as 10 × 10, 15 × 15 or 20 × 20 cm, smaller or larger. For longer items we make telescopic boxes.
Do you make prototypes and small runs?
Yes. A prototype shows how the tool sits in the insert and how unit boxes fit into the outer carton. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote.