How to Write a Specification for a Corrugated Box: Board, Dimensions, Tolerances, Print, Palletisation and Acceptance Criteria

A corrugated box specification is a short document that fixes everything a supplier needs to make the same box every time: your article code and version, the FEFCO style or a drawing, inside dimensions, the board grade with a minimum ECT, print, joint, tolerances, marking, palletisation, documents and acceptance criteria. Approved together with a reference sample, it makes quotes comparable, lets a second supplier make an identical box and gives your goods receipt something to check against. As of 18 November 2026.

Why a written specification pays off

An enquiry for a “brown 5-layer box, 400 × 300 × 200” leaves the supplier to decide inside or outside size, papers, joint, bundle size and pallet height, so two quotes are rarely comparable and two boxes rarely identical. The FEFCO code, the international classification of box styles, was created so that its references can be used in orders and specifications, and the German corrugated board association VDW publishes a quality catalogue for evaluating deliveries. A distributor keeps one sheet per article number, so that a box stays the same whichever plant makes it; for the questions of a first enquiry see corrugated packaging for business buyers: 15 answers.

The specification sheet, field by field

Field What to write Example (illustration, not an offer)
Code, name, version Your article number, a descriptive name, the version number and date, and who approved it Article 4031, shipping box 400 × 300 × 200, version 3
Construction The FEFCO code, or a drawing for die-cut and non-standard boxes (see the FEFCO code catalogue) FEFCO 0201
Dimensions Inside length × width × height in millimetres, marked “inside”, plus any outside limit set by a pallet, a machine or a carrier (see internal or external dimensions) Inside 400 × 300 × 200 mm; outside length not over 410 mm
Board Number of layers and flute, the board grade, a minimum ECT with the test method, and the liner colour or quality if it matters (see flutes, liners and grammage) 3-layer B, brown outer liner, minimum ECT as agreed in the quote, tested to ISO 3037
Print Method, number of colours with references (for example Pantone), artwork file and version, printed panels and position, and the approved printed sample (see printing on corrugated boxes) Flexo, 1 colour, logo on both long panels, artwork version 2
Joint and erection Glued, stitched or taped manufacturer’s joint, and whether the box is erected by hand or by machine Glued joint, erected by hand
Tolerances The dimensions that decide the fit and their tolerance, crease positions, and whether the standard quantity tolerance applies (see tolerances on corrugated boxes) Standard tolerances; inside length is critical
Marking and labels What is printed on the box (article number, barcode, symbols) and what the bundle and pallet labels show: article number, version, quantity, production date or batch Pallet label with article number, version, quantity and production date
Palletisation Pieces per bundle, bundles per pallet, pallet type, maximum load height, strapping, stretch film, layer pads and corner protectors (see flat-packed boxes per pallet) 25 boxes per bundle, EUR pallet 80 × 120 cm, load height up to 180 cm, stretch film
Documents With each delivery, a delivery note with your article number; on request, a food-contact declaration, board data and environmental data from the board supplier Delivery note with article number and version
Acceptance criteria Defect classes, sampling plan, reference sample, measuring method and climate, and what happens to a lot that fails (see below) Sampling plan based on ISO 2859-1; measured inside the erected box

Keep the sheet to one or two pages and attach the drawing, the artwork file and photos of the approved sample. Each field should be checkable on a delivered box: “good quality” is not a criterion.

Dimensions and construction: the conventions

Unless stated otherwise, the FEFCO code gives inside dimensions in millimetres as length × width × height: length is the longer side of the opening, width the shorter side and height the distance from the opening to the base. The height of a telescopic lid, or the overlap of outer flaps, follows after a slash. The code measures on the flat blank from the centre of the crease; on a delivery it is easier to measure inside the erected box, so name the method in the sheet.

The code also marks each style as usually erected by hand (M), by machine (A) or either way (M/A). If your boxes run on a case erector, add the machine requirements (see cartons for automatic packing lines) and, as the FBA and PMMI advise, the way the bundles are unitised, because strapping or film can affect how the boxes run.

Board and strength: write a requirement, not only a name

  • Grade. Name the layers and the flute, for example 3-layer B or 5-layer BC. A thickness or “double wall” alone describes many different boards.
  • Strength. Give a minimum edge crush resistance (ECT, in kN/m, measured to ISO 3037) or the load data: weight of the packed product, stack height, storage time and humidity. Grammage alone does not describe strength, because the papers decide much of it (see ECT, BCT and the McKee formula).
  • Papers. The VDW catalogue leaves the choice of liners and fluting papers to the manufacturer unless something else is agreed. If you need a white outer liner or kraftliner, write it in.
  • Grammage. Say whether it refers to the board or to one paper; it is a nominal value, measured to ISO 536.

Acceptance criteria: agree them before the first delivery

Acceptance criteria turn the specification into a check that both sides accept. A useful model is the VDW quality catalogue, written for customers’ quality assurance of corrugated packaging deliveries:

  1. Defect classes. It separates critical defects (the box is unusable or the goods are at risk), major defects (the box performs worse or disrupts the packing line) and minor defects (a general loss of quality), and assigns each characteristic, such as dimensions, creases, joint or print, to a class.
  2. Sampling. Boxes are drawn at random from the whole delivery, and the sample size and the defects allowed per class come from a plan based on ISO 2859-1, the standard for acceptance sampling by attributes indexed by acceptance quality limit (AQL), current edition 2026.
  3. Reference sample. An approved prototype or first-production box, kept by both sides, settles questions of colour, fit and creases.
  4. Measuring method and climate. Who measures, how many boxes, where and with what instrument. Paper reacts to humidity, so disputed measurements are repeated in the standard atmosphere of ISO 187: 23 °C and 50% relative humidity.
  5. Consequences. What happens to a lot that fails (sorting, replacement or return) and how quickly a problem is reported.

How to apply these criteria when a delivery arrives is described in goods-receipt inspection for corrugated boxes.

Versions and changes

  • Give every change a new version number and date, and list what changed.
  • Decide what happens to stock of the old version: used up first, or blocked at once.
  • Ask the supplier to confirm each new version in writing and to say whether it affects the cutting die or the printing plates.
  • Mark the first delivery of a new version and keep a reference sample of each one.
  • Send the same version to every supplier of the article, including a second source (see switching your corrugated box supplier).

Common mistakes

  • Dimensions without “inside” or “outside”.
  • Board described as “5-layer” or by thickness only, with no ECT or load data.
  • No pieces per bundle and no maximum pallet height, so the bundles do not fit your racking or your machine magazine.
  • A specification copied from an old supplier’s offer, with that supplier’s codes instead of yours.
  • No acceptance criteria, so every complaint starts with a discussion of what was agreed.

How we work with specifications at Kartoniki.eu

We quote within a few hours on working days, from your specification or from a sample, photos or a drawing. For new customers we provide board samples, construction drawings, 3D visualisations of the print and prototypes before the series. Board parameters such as ECT come from our board suppliers’ regular tests for all batches, and we tell you where a construction could be optimised. Quantity, date and dimensions can be changed without charge until production starts, except for board and printing plates already ordered. A cutting die paid for by the customer belongs to the customer, and we store it under a safekeeping agreement; printing plates are stored for 12 months from the last order of the design. We sign an NDA on request.

For distributors we make completely neutral boxes without a manufacturer’s mark, label bundles and pallets with your article numbers or EAN codes, and provide photos, technical sheets and product descriptions for your catalogue on request. We tailor order quantities to your needs – we also make short runs and prototypes. If a construction requires a minimum quantity, we state it in the quote.

Sources

FEFCO: FEFCO code (12th edition, 2022; conventions from its introduction) and the VDW quality catalogue for corrugated board packaging (English translation, version 4.4, 2014). FBA and PMMI: storage and handling of corrugated packaging materials (2018). ISO: ISO 3037:2022, ISO 536:2019, ISO 187:2022 and ISO 2859-1:2026. A standard names a method, not a certificate. Checked on 18 November 2026.

What to send us

Send your current specification, a drawing or a sample box, with the expected quantity per order and the delivery country, through our home page. We reply with a quote and, where fields are missing, with the questions that complete your specification.

Frequently asked questions

What should a specification for a corrugated box contain?

At least the article code and version, the construction (FEFCO code or drawing), inside dimensions, the board grade with a minimum ECT or the load data, print with colour references and the artwork version, the joint, tolerances, marking and labels, palletisation, documents and acceptance criteria. Attach the drawing, the artwork and photos of the approved reference sample.

Should the specification give inside or outside dimensions?

By convention, inside length × width × height in millimetres, as in the FEFCO code. Mark the figures as inside, and add an outside limit only where a pallet, a machine or a carrier sets one. The difference between the two depends on the board thickness.

How do I specify board strength?

Name the board grade (layers and flute) and a minimum edge crush resistance (ECT) in kN/m measured to ISO 3037, or give the load data: weight of the packed product, stack height, storage time and humidity, so that the supplier can propose a board. Grammage or thickness alone does not describe strength.

Do I need a reference sample if I have a drawing?

Yes. A drawing fixes the dimensions, but colour, the creases and the way the box closes are easier to judge against a physical sample. Keep an approved prototype or first-production box on both sides and replace it when the version changes.

What acceptance criteria are usual for corrugated boxes?

Many buyers follow the logic of the VDW quality catalogue: defects in critical, major and minor classes, random samples spread over the delivery and a sampling plan based on ISO 2859-1. Add the measuring method, the climate for disputed measurements and what happens to a lot that fails.

Who owns the cutting die and the printing plates?

At Kartoniki.eu, a cutting die paid for by the customer belongs to the customer, and we store it under a safekeeping agreement. Printing plates are stored for 12 months from the last order of the design. Note in your specification which article and version each die and plate belongs to.

Can you quote without a full specification?

Yes. We quote within a few hours on working days, also from a sample, photos or a drawing. If information is missing, we ask for it or propose a construction and a board, and the agreed values can then go into your specification.

How should changes to a specification be handled?

Give each change a new version number and date, list what changed, decide what happens to stock of the old version and ask the supplier to confirm the new version in writing. At Kartoniki.eu, quantity, date and dimensions can be changed without charge until production starts, except for board and printing plates already ordered.